• Journal of the Korean Chemical Society
• /
• v.12 no.1
• /
• pp.35-38
• /
• 1968

Radio iodination of various aromatic derivatives (aniline, toluene, iodobenzene, acetanilide, benzene, benzoic acid) were achieved at low temperature by a chloroamine-T procedures in presence of polar solvent(dioxane). Organic base (piperidine) was used as the catalyst. Iodine replacement reaction had occured on the aromatic or alicyclic ring by this reaction, and the kind and ratio of iodinated products were proved to be different from those of usual iodide reaction in organic solvent at low temperature. The reactivity of various aromatic or alicyclic compounds towards the present iodination system was evaluated and the scope and limitation of the present procedures in the preparation of radio pharmaceuticals were discussed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.211-216
• /
• 1997

The tungsten disulfide (WS$_2$) solid lubricant was synthesized by two different reaction processes, and the chemical and physical characteristics of synthesized WS$_2$ powder were analyzed in terms of the average particle size, morphology, crystalline phase. The solid WO$_3$ powder with the average size of 0.2 $\mu$m was reacted with CS$_2$ gas flowed with N$_2$ or 96% N$_2$ + 4% H$_2$ forming gas for 36 h and 24 h at 900$\circ$C respectively. In the case of vapour phase transport method, the 3.5 wt% iodine was added as a vapour transport reagent into the composition of tungsten and sulfur powders maintaining a constant molar ratio of W : S = 1 : 2.2. The mixture was then heat treated at 850$\circ$C for 2 weeks in vacuum The reaction product obtained showed the average size of 12 $\mu$m and the hexagonal plate shape of typical solid lubricant with 2H-WS$_2$ crystalline phase.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.1
• /
• pp.13-21
• /
• 2016

The Sulfur-Iodine thermochemical hydrogen production process (SI process) consists of the Bunsen reaction section, the $H_2SO_4$ decomposition section, and the HI decomposition section. The $HI_x$ solution ($I_2-HI-H_2O$) could be recycled to Bunsen reaction section from the HI decomposition section in the operation of the integrated SI process. The phase separation characteristic of the Bunsen reaction using the $HI_x$ solution was similar to that of $I_2-H_2O-SO_2$ system. On the other hands, the amount of produced $H_2SO_4$ phase was small. To investigate the effects of $SO_2$ solubility on Bunsen reaction, the continuous Bunsen reaction was performed at variation of the amounts of $SO_2$ gas. Also, it was carried out to make sure of the effects of partial pressure of $SO_2$ in the condition of 3bar of $SO_2-O_2$ atmosphere. As the results, the characteristic of Bunsen reaction was improved with increasing the amounts and solubility of $SO_2$ gas. The concentration of Bunsen products was changed by reverse Bunsen reaction and evaporation of HI after 12 h.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.21-26
• /
• 2014

When iodine container for dental mouth treatment is opened, thread for treatment is cut by the blade in cap of container. Due to the problem of corrosion in a short period time after the reaction of metal blade to iodine solution, it gives impact on patient hygiene. In order to solve the problem, alternative products such as ceramic blade are developed and produced recently. In case of ceramic blade, it is produced by handwork and machine work. In this study, for the quantity production of ceramic blade with powder injection molding, we proposed a delivery system to have uniform charge of 20 cavity. Using Moldflow, simulation on 20 Cavity flow was performed. And then the mold was obtained through mold production and modification.(based on simulation) After injection molding, debinder, sintering process was achieved for ceramic blade, and the cap product was completed via insert injection on ceramic blade. In this study, we verified possibility of quantity production of ceramic blade which showed effective performance for cutting.

• Analytical Science and Technology
• /
• v.25 no.5
• /
• pp.284-291
• /
• 2012

Bloody fingerprint is a very important evidence. In this study, we confirmed the enhancement effects of ninhydrin, leucocrystal violet (LCV), fuchsin acid, iodine and dimethylaminocinnamaldehyde (DMAC) on bloody fingerprints which were deposited on paper. Bloody fingerprint were deposited on paper sequentially and used after drying at room temperature. If a ridge of bloody fingerprint was clear, ninhydrin and LCV was the most effective but was not good for invisible ridge. Fuchsin acid reagent dyed paper surface so that the contrast of enhanced bloody fingerprint was decreased. Although bloody fingerprint was enhanced with iodine reagent, but the developed color was very weak after reaction. We thought that the enhancement effect of iodine to bloody fingerprint was negligible. Also, the enhancement effect of DMAC reagent to relatively clear bloody fingerprint was not good. However, it was very effective to faint or invisible ridge. By washing with methanol, contrast of enhanced bloody fingerprint was increased.

• Journal of the Korean Chemical Society
• /
• v.9 no.2
• /
• pp.106-109
• /
• 1965

The effects of methyl borate, iodine and potassium iodide on the Co-60 gamma radiolysis of methanol have been reinvestigated at room temperature, utilizing an experimental technique based on gas chromatographic determinations of the gaseous products of the radiolysis. The presence of methyl borate reduces the yield for ethylene glycol to some extent, with slight reductions of the yields for hydrogen and formaldehyde. The presence of iodine causes appreciable reduction of the yields for hydrogen, formaldehyde and ethylene glycol, with a slight reduction of the yield for methane. The presence of potassium iodide reduces the yields for hydrogen and ethylene glycol but increases that for formaldehyde. A mechanism of the radiolysis reaction is discussed, on the basis of the observed data.

• Tribology and Lubricants
• /
• v.13 no.4
• /
• pp.60-65
• /
• 1997

The tungsten disulfide $(WS_2)$ solid lubricant was synthesized by two different reaction processes, i.e., the reaction between $CS_2$ gas phase and solid $WO_3$powder, and the vapour phase transport method of tungsten and sulfur in a high vacuum. The chemical and physical characteristics of synthesized $WS_2$powder were analyzed in terms of the average particle size, morphology, crystalline phase etc. in comparison with those of commercial $WS_2$powder. The solid $WO_3$ powder with the average size of 0.2 ${\mu}{\textrm}{m}$ was reacted with $CS_2$gas flowed with$N_2$or 96%$N_2{\times}4%H_2$forming gas for 36 h and 24 h at 90$0^{\circ}C$ respectively. $WS_2$ crystalline phase was then formed through the intermediate phase of .$W_{20}O_{58}$ In the case of vapour phase transport method, the 3.5 wt% iodine was added as a vapour transport reagent into the composition of tungsten and sulfur powders maintaining a constant molar ratio of W:S=1:2.2. The mixture was then heat treated at 85$0^{\circ}C$ for 2 weeks in vacuum. The reaction product obtained showed the average size of 12 ${\mu}{\textrm}{m}$ and the hexagonal plate shape of typical solid lubricant with 2H-$WS_2$crystalline phase.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.6
• /
• pp.886-892
• /
• 2006

The interaction between tetraethylammonium chloride (TEACl) with ICl and tetraethylammonium iodide (TEAI) and aza-15-crown-5 (A15C5) with $I_2$ and ICl have been examined spectrophotometrically in acetonitrile solution. The results of TEACl-ICl indicate the formation of $ICl_2$ - through equilibrium reaction. In the case of TEAI-$I_2$ and A15C5-$I_2$, the equilibrium formation of $I_3$ - is confirmed. The interaction of TEAI-ICl begins with the simultaneous production of $I_2$ and IC$I_2$ - (at TEAI/ICl < 0.5) as well as continues with the simultaneous consumption of $I_2$ and formation of I$I_3$ - (at TEAI/ICl > 0.5). Similar behavior is also observed for A15C5-ICl system. However, the changes are seen at A15C5/ICl mole ratios less and more than 0.66. Several equations have been suggested for the formation of detected species. The formation constants of various reactions were evaluated from the computer fitting of the absorbance-mole ratio data. IR spectra of A15C5 and 1:1 A15C5:ICl or A15C5:$I_2$ complexes are compared and the effect of complexation on absorption bands is discussed.

• Journal of the Korean Chemical Society
• /
• v.11 no.2
• /
• pp.51-55
• /
• 1967

A procedure, which is effective enough to label various compounds at low temperature by radioactive iodine, was investigated. The chloramine-T procedure was mostly effective for labelling various protein, amino acids, hormones, and organic compounds by iodine, and the procedure was able to afford both high specific activity and high radiochemical yield. However, the procedure was ineffective for labelling unsaturated compounds or other organic compounds which has not active aromatic nucleus of reactive character. The radiochemical yield of the procedure was generally averaged from 100% to 60%. The reactivity of the aromatic part of the organic compound towards this reagent was correspond to that of an electrophillic reagent. The procedures were described and the reaction path was considered.

• Nuclear Engineering and Technology
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1977

Monoiodobromosulfophthalein-$^{131}$ I (MIBSP-$^{131}$ I), one of the useful radiopharmaceuticals for liver function studies, has been prepared by a simple isotope exchange between the MIBSP and the molecular iodine-$^{131}$ I in phosphate buffer, pH 5.3. The pooled cold MIBSP was prepared by a normal iodination of BSP using iodine monochloride, and separated from the iodination mixture by applying a Sephadex LH-20 chromatography. At 10$0^{\circ}C$, the exchange rate was so fast that the reaction could be terminated in 5 min to show upto 95% yield. The final product could be obtained simply by further heating for about 5 min in a boiling water bath in the presence of a small amount of hydrogen peroxide, and subsequent pH adjustment and membrane filtration.