• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.572-583
• /
• 2019

This paper aims to assess the applicability of the Runge Kutta Discontinuous Galerkin-Direct Ghost Fluid Method to the internal explosion inside a water-filled tube, which previously was studied by many researchers in separate works. Once the explosive charge located at the inner center of the water-filled tube explodes, the tube wall is subjected to an extremely high intensity fluid loading and deformed. The deformation causes a modification of the field of fluid flow in the region near the water-structure interface so that has substantial influence on the response of the structure. To connect the structure and the fluid, valid data exchanges along the interface are essential. Classical fluid structure interaction simulations usually employ a matched meshing scheme which discretizes the fluid and structure domains using a single mesh density. The computational cost of fluid structure interaction simulations is usually governed by the structure because the size of time step may be determined by the density of structure mesh. The finer mesh density, the better solution, but more expensive computational cost. To reduce such computational cost, a non-matched meshing scheme which allows for different mesh densities is employed. The coupled numerical approach of this paper has fewer difficulties in the implementation and computation, compared to gas dynamics based approach which requires complicated analytical manipulations. It can also be applied to wider compressible, inviscid fluid flow analyses often found in underwater explosion events.

• Coupled systems mechanics
• /
• 제8권3호
• /
• pp.199-218
• /
• 2019

This paper studies the forced vibration of the hydro-elastic system consisting of the anisotropic (orthotropic) plate, compressible viscous fluid and rigid wall within the scope of the exact equations and relations of elastodynamics for anisotropic bodies for describing of the plate motion, and with utilizing the linearized exact Navier-Stokes equations for describing of the fluid flow. For solution of the corresponding boundary value problem it is employed time-harmonic presentation of the sought values with respect to time and the Fourier transform with respect to the space coordinate on the coordinate axis directed along the plate length. Numerical results on the pressure acting on the interface plane between the plate and fluid are presented and discussed. The main aim in this discussion is focused on the study of the influence of the plate material anisotropy on the frequency response of the mentioned pressure. In particular, it is established that under fixed values of the shear modulus of the plate material a decrease in the values of the modulus of elasticity of the plate material in the direction of plate length causes to increase of the absolute values of the interface pressure. The numerical results are presented not only for the viscous fluid case but also for the inviscid fluid case.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.240-247
• /
• 2023

In this study, morphological and hydrodynamic characteristics of the non-axisymmetric supercavity generated behind a disk-shaped cavitator were examined. By extending the previous study on axisymmetric supercavitating flow based on a boundary element method, hydrodynamic forces acting under the angle of attack condition of 0 to 30 ° and shape characteristics of the supercavity were analyzed. The results revealed that increasing the angle of attack by 30 ° reduced the length and width of the cavity by about 15% and the volume by about 40 %. An empirical formula that can quantitatively estimate the geometrical characteristics and change of the cavity was derived. It is expected that this method can be used to evaluate the shape information and force characteristics of the supercavity for the control of the vehicle in a very short time compared to the viscous analysis in the initial design stage of the supercavity underwater vehicle.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.91-97
• /
• 2014

A high resolution numerical method aimed at solving cavitating flow was proposed and applied to gas-liquid two-phase shock tube problem with arbitrary void fraction. The present method with compressibility effects employs a finite-difference 4th-order Runge-Kutta method and Roe's flux difference splitting approximation with the MUSCL TVD scheme. The Jacobian matrix from the inviscid flux of constitute equation is diagonalized analytically and the speed of sound for the two-phase media is derived by eigenvalues. So that the present method is appropriate for the extension of high order upwind schemes based on the characteristic theory. By this method, a Riemann problem for Euler equations of one dimensional shock tube was computed. Numerical results of high speed flow phenomena such as detailed observations of shock and expansion wave propagations through the gas-liquid two-phase media and some data related to computational efficiency are made. Comparisons of predicted results and solutions at isothermal condition are provided and discussed.

• 한국유체기계학회 논문집
• /
• 제2권3호
• /
• pp.45-51
• /
• 1999

Centrifugal fans are widely used and the noise generated by these machines causes one of the most serious problems. In general, the centrifugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the flow discharged from the impeller and the cutoff in the casing. However, only a few researches have been carried out on predicting the noise due to the difficulty in obtaining detailed information about the flow field and casing effects on noise radiation. The objective of this study is to develop a prediction method for the unsteady flow field and the acoustic pressure field of a centrifugal fan and to calculate the effects of rotating velocity, flow rate, cut-off distance and the number of blades and its effects on the noise of the fan. We assume that the impeller rotates with a constant angular velocity and the flow field around the impeller is incompressible and inviscid. So, a discrete vortex method (DVM) is used to model the centrifugal fan and to calculate the flow field. The force of each element on the blade is calculated with the unsteady Bernoulli equation. Lowson's method is used to predict the acoustic source. The cut-off distance is the most important factor effecting the noise generation. Acoustic pressure is proportional to 2.8, which shows the same scaling index as the experimental result. In this paper, the cut-off distance is found to be the dominant parameter offecting the acoustic pressure.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.37-46
• /
• 2004

지면효과의 여러 현상을 Navier-Stokes 방정식을 이용하여 해석하고 공기역학적인 관점에서 그 결과를 분석하였다. 2차원 지면효과에 대해서는 이미지 와류에 의한 약형 표면의 압력변화, 두께의 영향, 지면효과의 비점성 유동 현상 등을 확인하였으며, 3차원 지면효과로 익단와류 강도의 증가현상과 유효스팬 증가, 익단와류의 바깥 흐름현상 등을 확인하였다. 또한, 재래식 익형인 NACA 6409와 러시아의 WIG기 전용익형인 DHMTU 8-30에 대해서 Irodov의 조건식을 사용하여 새로 정안정성을 해석하였다. 해석결과, DHMTU 8-30 익형의 세로 정안정성이 NACA 6409 익형보다 훨씬 우수한 것으로 나타났다. 그러므로 DHMTU 8-30을 WIG기에 사용할 경우 NACA 6409에 비해 꼬리날개 부피비를 현저히 줄일 수 있음을 확인하였다.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.18-22
• /
• 2011

The Ranking source panel method was used to predict the flow phenomenon of a ship with a goose-neck type bulbous bow penetrating the free surface. The non-linearity of the free surface boundary condition was fully satisfied using an iterative calculation method, and the raised panel method was adopted to obtain a more stable solution at each iteration step. The panel cutting method was applied to generate a hull calculation grid at each iteration step, including the first step. At that time, the nose of the goose-neck type bulbous bow was divided by the free surface and the free surface panel was modified at each iteration step using the variable free surface panel method. Numerical calculations were performed to investigate the validity and efficiency of the applied numerical algorithm using the 3600 TEU container carrier. The computed wave resistance coefficients were compared with the experimentally achieved residual resistance coefficients.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권3호
• /
• pp.157-167
• /
• 2015

In order to provide simple and accurate wave theory in design of offshore structure, an analytical approximation is introduced in this paper. The solution is limited to flat bottom having a constant water depth. Water is considered as inviscid, incompressible and irrotational. The solution satisfies the continuity equation, bottom boundary condition and non-linear kinematic free surface boundary condition exactly. Error for dynamic condition is quite small. The solution is suitable in description of breaking waves. The solution is presented with closed form and dispersion relation is also presented with closed form. In the last century, there have been two main approaches to the nonlinear problems. One of these is perturbation method. Stokes wave and Cnoidal wave are based on the method. The other is numerical method. Dean's stream function theory is based on the method. In this paper, power series method was considered. The power series method can be applied to certain nonlinear differential equations (initial value problems). The series coefficients are specified by a nonlinear recurrence inherited from the differential equation. Because the non-linear wave problem is a boundary value problem, the power series method cannot be applied to the problem in general. But finite number of coefficients is necessary to describe the wave profile, truncated power series is enough. Therefore the power series method can be applied to the problem. In this case, the series coefficients are specified by a set of equations instead of recurrence. By using the set of equations, the nonlinear wave problem has been solved in this paper.

• 한국항공우주학회지
• /
• 제36권10호
• /
• pp.939-946
• /
• 2008

압축성 유동장 해석을 위해 개발된 전산유체역학 프로그램의 응용범위를 확장하여 비압축성 유동장을 해석하고자 할 경우 해의 수렴성에 문제가 발생할 수 있다. 이러한 수렴성 저하 문제는 지배방정식의 수학적 특성에 기인하며 예조건화 방법을 이용하면 지배방정식의 큰 수정 없이 해결할 수 있다. 본 논문은 예조건화 기법을 적용한 압축성 유동해석 프로그램을 개발하여 수렴성의 문제없이 저속의 비압축성 유동장 해석의 적용에 관한 내용을 다루고 있다. 개발된 프로그램의 정확성과 수렴특성을 확인하기 위해 정상상태의 비점성 및 층류 그리고 난류 문제에 대하여 해석하였으며 이를 실험치와 비압축성 계산치와 비교하였다

• 한국해양환경ㆍ에너지학회지
• /
• 제3권2호
• /
• pp.18-24
• /
• 2000

성질이 다른 두가지 유체가 복잡한 상호작용을 하는 경우의 유동을 살펴 보기 위하여 2차원 비점성 수치해법을 개발하고, 이를 감압된 수중 파이프에서의 기름 유출 문제에 적용하였다. 두 유체의 경계면은 보오텍스 쉬트로 모델링하고 보오텍스격자법 (vortex-in-cell method)을 적용하여 유동을 해석하며, 장시간의 유동 모사를 위하여 경계면의 분할과 접합이 가능하도록 하였다. Boussinesq 가정에서 외부유체의 관내로의 유입 속도가 기존의 수학모델과 거의 동일함을 확인하였고, 경계면에서의 복잡한 상호 유입과 보오텍스 유동에도 불구하고 Lock Exchange가 발생함을 보였다. 개발된 수치해법은 다양한 해양환경의 2상유체 문제에 효과적으로 이용될 수 있다고 사료된다.