• Journal of Medicine and Life Science
• /
• 제18권1호
• /
• pp.20-23
• /
• 2021

Methemoglobin is generated by the oxidation of ferrous iron to ferric iron within a hemoglobin molecule. Methemoglobin is unable to bind and transport oxygen, resulting in methemoglobinemia, which can lead to fatal tissue hypoxia. The most common cause of methemoglobinemia is poisoning by oxidizing agents such as dapsone, benzocaine, and primaquine. However, methemoglobinemia can also be caused by normal dietary sources. We present two cases of methemoglobinemia that developed after a normal diet in two male patients. In this case report, the patients suddenly developed dyspnea and cyanosis after eating the same meal. They had no history of suspected poisoning, such as the use of drugs, exposure to chemicals, or gas inhalation. Their symptoms did not improve even after a high dose of oxygen was administered; further, an abnormal 'oxygen saturation gap' was observed. Because of CO-oximetry, the methemoglobin levels of the patients were 50.0% and 46.6%, respectively. We administered methylene blue (1 mg/kg), and the patients recovered completely without any complications. Emergency physicians should, therefore, be aware that methemoglobinemia can also be caused by normal dietary sources. In addition, if the source and route of contamination are unclear, an epidemiological investigation should be conducted.

• 패션비즈니스
• /
• 제26권6호
• /
• pp.14-31
• /
• 2022

Worn by both males and females the kimono is the national dress of Japan. Previous research highlights that this national dress is fading from tradition and evolves to develop with the times and fashion trends. This research aims to investigate what a kimono represents both historically and currently within Western society. The idea of the kimono being more than a national dress representing Japan, the main three themes researched will be (1) Shape (2) Narrative (3) Journey from East to West. Based on both primary and secondary sources this research indicates that there is a strong relationship between the universal increase of kimono wearers in Eastern and Western societies from history through to present day. Primary research is utilised in the form of two types of interviews. Primary outcomes bring a personal perspective to how and why kimono is worn nowadays within Europe. Secondary sources include online lectures held by kimono specialists as well as subject relevant books. From the 19th century where the Dutch were the only European country to trade with Japan, an exchange of fabrics took place which later led to the exchange of: fit, fashion and pattern (primarily within Western womenswear fashion.) This distinct garment never gets discontinued and evolves with social demands within society today.

• 한국균학회지
• /
• 제25권4호통권83호
• /
• pp.305-310
• /
• 1997

P. eryngii균의 톱밥 인공재배에 관한 연구를 수행한 결과 균사배양 조건에 관해서 얻은 결과를 요약하면 다음과 같다. P. eryngii균의 균사배양 최적배지는 Lilly배지에서 균사생장량이 가장 많았고, 균사배양 최적온도는 $25{\sim}30^{\circ}C$,최적 pH는 6.0이었다. 최적 탄소원은 단당류인 경우 glucose, 다당류에서는 dextrin 이었으며, 최적 농도는 glucose $3{\sim}4%$, dextrin은 5%수준에서 균체량이 가장 많았다. 또 최적 질소원은 유기태 질소인 casamino acid에서 균체량이 가장 많았으며 최적농도는 0.12%였다.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.143-150
• /
• 2005

To verify applicability of multi-dimensional spectral analysis (MDSA) fur noise source identification two different approaches which are frequency response and coherent function have been investigated. The coherence function approach appears able to separate the correlated system when the noise sources were coherent. In this study, we identify contribution of structure-borne-noise of vehicle HVAC system using MDSA method. Firstly, to identify the applicability of MDSA method, 4-inputs of vehicle HVAC system were the signals measured by accelerometers attached on the selected noise sources which were composed of blower, evaporator, heater and duct. While 1-output which was driver's position sound was the SPL signals measured by a remote microphone, when the blower motor was operating. We identify efficiency of systems modeled with four Inputs/single output through ordinary coherence function (OCF) and partial coherence function (PCF). As a result of experiment, the blower accounted for $62-88\%$ of the overall level of sound energy density. Also, according to the analysis of acoustic signal and vibration signals measurement, an investigation of the noise source identification in the vehicle HVAC is presented. With the sound intensity method, the major sources of the vehicle HVAC radiation are verified. Also the method of improving the noise reduction is proposed by attaching damping patch access to blower motor and noise reduction is verified.

• 한국환경복원기술학회지
• /
• 제21권2호
• /
• pp.13-26
• /
• 2018

The restoration of the impaired stream ecosystem is an important part of river policies in Ministry of Environment (MoE). However, the diagnosing the impairment sources of stream ecosystem has been omitted on the current river projects and policies. This phenomena lead the remaining impairment sources keep influencing on negative effects on streams. Hence, it is critical to construct a diagnosis system of impairment sources in order to increase the efficiency of various river restoration projects and policies. Moreover, it is also important to understand the relative impact of socio-economic factors of the impairment of stream ecosystems so as to build a domestic diagnosis system in place. Therefore, the study aims to analyse the relative effects of socio-economic factors which are the source of the stream ecosystem impairments through implementing the Analytic Hierarchy Process (AHP). In order to achieve the goal, a list of socio-economic factors influencing the stream health has been derived. On the basis of the derived causes list, AHP questionnaire were carried out to the experts of aquatic ecology. The study results could be implemented to analysing the relative influence of socio-economic impairment causes in domestic stream environments. In addition, more case study investigation is needed to cross-check if the derived impairment causes and weights are applied in the field as well as to develop more reliable indicators.

• Asian Journal of Atmospheric Environment
• /
• 제12권1호
• /
• pp.59-66
• /
• 2018

This study aims to evaluate the performance of the Air Quality Model (AQM) for the seasonal and spatial distribution of the $NH_3$ concentration in the atmosphere. To obtain observational data for the model validation, observations based on biweekly sampling have been conducted using passive samplers since April 2015 at multiple monitoring sites in the Tokyo metropolitan area. AQM, built based on WRF/CMAQ, was applied to predict the $NH_3$ concentration observed from April 2015 to March 2016. The simulation domain includes the Kanto region, which is the most densely populated area in Japan. Because the area also contains large amount of livestock, especially in its northern part, the density of the $NH_3$ emissions derived from human activities and agriculture there are estimated to be the highest in Japan. In the model validation, the model overestimated the observed $NH_3$ concentration in the summer season and underestimated it in the winter season. In particular, the overestimation in the summer was remarkable at a rural site (Komae) in Tokyo. It was found that the overestimation at Komae was caused by the transportation of $NH_3$ emitted in the northern part of the Kanto region during the night. It is suggested that the emission input used in this study overestimated the $NH_3$ emission from human sources around the Tokyo suburbs and agricultural sources in the northern part of the Kanto region in the summer season. In addition, the current emission inventories might overestimate the difference of the agricultural $NH_3$ emissions among seasons. Because the overestimation of $NH_3$ in the summer causes an overestimation of $NO_3{^-}$ in $PM_{2.5}$ in the AQM simulation, further investigation is necessary for the seasonal variation in the $NH_3$ emissions.

• Environmental Analysis Health and Toxicology
• /
• 제23권4호
• /
• pp.257-265
• /
• 2008

Nanotechnology is emerging as one of the key technologies of the 21 st century and is expected to enable one to broaden the applicability across a wide range of sectors that can benefit public and improve industrial competitiveness. Already, consumer products containing nanomaterials are available in markets including coatings, computers, clothing, cosmetics, sports equipment and medical devices. Recently, Institute of Occupational Medicine in UK reported an occupational hygiene review for nanoparticles in the viewpoint of nanotoxicity. They reported that the exposure control is very important issues in workplace for exposure assessment, but no proper methods are available to measure the extent of exposures to nanoparticles in the workplace. Therefore, for the estimation of exposure of nanomaterials, we have to approach the material-balance methodology, which similarly carried out in TRI (toxic release inventory) for hazardous chemicals. In order to use this methodology, the exposure source of nanomaterials should be determined firstly. Therefore, herein we investigated the main sources and processes for the exposure to nanomaterals by conducting the survey. The results could be used to define and assess nanohazard sources.

• Mycobiology
• /
• 제37권4호
• /
• pp.258-266
• /
• 2009

Pleurotus eryngii, known as king oyster mushroom has been widely used for nutritional and medicinal purposes. This study was initiated to screen the suitable conditions for mycelial growth and to determine the phylogenetic relationship of the selected strains. Optimal mycelial growth was observed at $30{^{\circ}C}$ and minimum mycelial growth observed at $10{^{\circ}C}$. This mushroom tolerates a broad pH range for mycelial growth, with most favorable growth observed at pH 6. Results also indicated that glucose peptone, yeast malt extract and mushroom complete media were favorable growth media, while Hennerberg and Hoppkins media were unfavorable. Dextrin was the best and xylose the least effective carbon sources. Results revealed that inorganic nitrogen sources were less effective than organic sources for the mycelial growth of P. eryngii. Investigation of genetic diversity is necessary to identify the strains. The ITS region of rDNA were amplified using PCR. The size of the ITS1 and ITS2 regions of rDNA from the different strains varied from 214 to 222 bp and 145 to 236 bp, respectively. The sequence of ITS2 was more variable than that of ITS1, and the 5.8S sequences were identical. A phylogenetic tree based on the ITS region sequences indicated that selected strains could be classified into six clusters. Fourteen IUM and ATCC- 90212 strains were also analyzed by RAPD with 20 arbitrary primers. Fourteen of these primers were efficiently amplified the genomic DNA. The number of amplified bands varied with the primers and strains, with polymorphic fragments in the range from 0.2 to 2.3 kb.

• 비파괴검사학회지
• /
• 제32권5호
• /
• pp.469-483
• /
• 2012

인체 연조직에서 기계적인 진동의 전달 특성은 조직의 탄성 특성에 의존한다. 연조직의 진동 특성으로부터 암이나 종양을 진단할 수 있기 때문에 진동의 전달 특성에 대한 연구는 중요한 의미를 가진다. 이 논문은 연조직의 표면에 위치하는 여러 형태의 응력 진동원에 의해 연조직 내에 발생되는 변위 패턴을 분석하고 비교하였다. 진동원으로는 수직하중, 접선하중, 그리고 면외전단하중이 고려되었다. 점탄성 단일층에서의 변위에 대한 이론적 표현식을 구하였고, 수치계산은 반공간 및 무한평판조직에서 수행되었다. 그리고 유한크기조직에서의 변위패턴을 유한요소법으로 시뮬레이션하였다. 응력 형태, 진동원 크기 및 주파수, 그리고 경계면이 변위에 미치는 영향이 분석되었다.

• 한국환경보건학회지
• /
• 제45권5호
• /
• pp.487-496
• /
• 2019

Objective: The purpose of this study was to create soil contamination maps using QGIS (Quantum Geographic Information System) and suggest selection methods for soil pollution sources for preferential investigation in a soil contamination survey. Method: Data from soil contamination surveys over five years in Gyeonggi-do Province, South Korea (2013-2017) were used for making soil contamination maps and analyzing the density of survey points. By analyzing points exceeding the concern level of soil contamination, soil pollutant sources for priority management were identified and selection methods for preferred survey points were suggested through a study of the model area. Results: A soil contamination survey was conducted at 1,478 points over five years, with the largest number of surveys conducted in industrial complex and factory areas. Soil contamination maps for copper, zinc, nickel, lead, arsenic, fluoride, and total petroleum hydrocarbons were made, and most of the survey points were found to be below concern level 1 for soil contamination. The density of the survey points is similar to that of densely populated areas and factory areas. The analysis results of points exceeding the criteria showed that soil pollutant sources for priority management were areas where ore and scrap metals were used and stored, traffic-related facilities areas, industrial complex and factory areas, and areas associated with waste and recycling. According to the study of the model area, the preferred survey points were traffic-related facilities with 15 years or more since their construction and factories with a score of 10 or more for soil contamination risk. Conclusion: Soil contamination surveys should use GIS for even regional distribution of survey points and for the effective selection of preferred survey points. This study may be used as guidelines to select points for a soil contamination survey.