• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.14-18
• /
• 2004

High levels of ambient noise and safety factors often limit the use of 'active-source' seismic methods for geotechnical investigations in urban environments. As an alternative, shear-wave velocity-depth profiles can be obtained by treating the background microtremor wave field as a stochastic process, rather than adopting the traditional approach of calculating velocity based on ray path geometry from a known source. A recent field test in Melbourne demonstrates the ability of the microtremor method, using only Rayleigh waves, to resolve a velocity inversion resulting from the presence of a hard, 12 m thick basalt flow overlying 25 m of softer alluvial sediments and weathered mudstone. Normally the presence of the weaker underlying sediments would lead to an ambiguous or incorrect interpretation with conventional seismic refraction methods. However, this layer of sediments is resolved by the microtremor method, and its inclusion is required in one-dimensional layered-earth modelling in order to reproduce the Rayleigh-wave coherency spectra computed from observed seismic noise records. Nearby borehole data provided both a guide for interpretation and a confirmation of the usefulness of the passive Rayleigh-wave microtremor method. Sensitivity analyses of resolvable modelling parameters demonstrate that estimates of shear velocities and layer thicknesses are accurate to within approximately $10\%\;to\;20\%$ using the spatial autocorrelation (SPAC) technique. Improved accuracy can be obtained by constraining shear velocities and/or layer thicknesses using independent site knowledge. Although there exists potential for ambiguity due to velocity-thickness equivalence, the microtremor method has significant potential as a site investigation tool in situations where the use of traditional seismic methods is limited.

• 한국전산구조공학회논문집
• /
• 제36권3호
• /
• pp.203-211
• /
• 2023

층상 반무한체에서의 확률론적 완전파형역산을 위한 Markov chain Monte Carlo (MCMC) 모사 기법을 정식화한다. Thin-layer method를 사용하여 조화 수직 하중이 작용하는 층상 반무한체의 지표면에서 추정된 동적 응답과 관측 데이터와의 차이 및 모델 변수의 사전 정보와의 차이를 최소화하도록 목적함수와 모델 변수의 사후 확률밀도함수를 정의한다. 목적함수의 기울기에 기반하여 MCMC 표본을 제안하기 위한 분포함수와 이를 수락 또는 거절할지 결정하는 수락함수를 결정한다. 기본 진동모드 뿐만이 아니라 고차 진동모드가 우세한 경우를 포함하여 다양한 층상 반무한체의 전단파 속도 추정에 제안된 MCMC 모사 기법을 적용하고 그 정확성을 검증한다. 제안된 확률론적 완전파형역산을 위한 MCMC 모사 기법은 층상 반무한체의 전단파 속도와 같은 재료 특성의 확률적 특성을 추정하는 데 적합함을 확인할 수 있다.

• 환경영향평가
• /
• 제21권5호
• /
• pp.715-724
• /
• 2012

In this study, we simulated water temperature in the downstream according to withdrawal types of dam using EFDC model. Three scenarios were assumed as water was released from the surface layer, the middle layer, and the bottom layer at intervals of 10m depth. In case of the surface layer withdrawal, the water temperature rose from March and lowered gradually after it reached a peak in August. The middle and the bottom layers effluence temperatures were lower than the surface layer temperature by maximum $15.9^{\circ}C$(in July), but after September, temperature inversion appeared. It was advantageous for the surface layer withdrawal to decrease cold damage and fog in downstream area and was possible to the middle and the bottom layers withdrawal from August to September. However, the reliability of model should be improved by accumulating the real-time information of water temperature.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.775-791
• /
• 2017

Surface wave techniques are widely used as non-invasive method for geotechnical site characterization. Field surface wave data are collected and analyzed using different processing techniques to generate the dispersion curves, which are further used to extract the shear wave velocity profile by inverse problem solution. Characteristics of a dispersion curve depend on the subsurface layering information of a vertically heterogeneous medium. Sometimes soft layer can be found between two stiff layers in the vertically heterogeneous media, and it can affect the wave propagation dramatically. Now most of the surface wave techniques use the fundamental mode Rayleigh wave propagation during the inversion, but this may not be the actual scenario when a soft layer is present in a vertically layered medium. This paper presents a detailed and comprehensive study using finite element method to examine the effect of soft layers which sometimes get trapped between two high velocity layers. Determination of the presence of a soft layer is quite important for proper mechanical characterization of a soil deposit. Present analysis shows that the thickness and position of the trapped soft layer highly influence the dispersion of Rayleigh waves while the higher modes also contribute in the resulting wave propagation.

• 지구물리와물리탐사
• /
• 제9권4호
• /
• pp.261-270
• /
• 2006

제주도 중산간 지역에서 자기지전류(MT) 및 가청주파수대역 자기지전류(AMT) 탐사자료를 얻고 이를 이용하여 2차원 역산을 수행하였다. 일본 Kyushu에 원거리 기준점을 설치, 운용하여 양질의 자료획득이 가능하였고 MT 탐사와 동시에 AMT 탐사를 수행함으로써 $10^{-4}{\sim}10^4\;Hz$에 이르는 광대역의 수직탐사 자료를 획득하였다. 2차원 모델링과 현장자료에서 MT 주파수대만을 이용한 경우와 이것에 AMT 주파수대를 포함해서 역산을 수행한 경우를 비교한 결과, 우리나라와 같이 전기비저항이 높은 지질구조에서는 AMT 자료를 함께 얻어 천부의 분해능을 확보하는 것이 심부구조 해석에도 도움이 되는 것으로 나타났다. 두 개의 남-북 방향 측선에 대한 역산결과 제주도에서 특징적으로 나타나는 미고결 퇴적층이 10 ohm-m 내외로 두 개의 측선 전반에 걸쳐 나타났으며 측선 중앙부에서 심부까지 연장된 저비저항 이상대가 존재하는 것으로 나타났다. 그러나 이 저비저항 이상대가 제주도 주변 바다의 영향인지 과거의 화산활동과 관련된 것인지에 대한 해석을 뒷받침해 줄 어떠한 정보도 아직은 확보되지 않아 향후 추가적인 연구가 요구된다.

• 한국환경과학회지
• /
• 제13권8호
• /
• pp.721-731
• /
• 2004

The dispersion of suspended particulates in the coastal complex terrain of mountain-inland basin (city)-sea, considering their recycling was investigated using three-dimensional non-hydrostatic numerical model and lagrangian particle model (or random walk model). Convective boundary layer under synoptic scale westerly wind is developed with a thickness of about I km over the ground in the west of the mountain, while a thickness of thermal internal boundary layer (TIBL) is only confined to less than 200m along the eastern slope of the mountain, below an easterly sea breeze circulation. At the mid of the eastern slop of the mountain, westerly wind confronts easterly sea breeze, which goes to the height of 1700 m above sea level and is finally eastward return flow toward the sea. At this time, particulates floated from the ground surface of the city to the top of TIBL go along the eastern slope of the mountain in the passage of sea breeze, being away the TIBL and reach near the top of the mountain. Then those particulates disperse eastward below the height of sea-breeze circulation and widely spread out over the coastal sea. Total suspended particulate concentration near the ground surface of the city is very low. On the other hand, nighttime radiative cooling produces a shallow nocturnal surface inversion layer (NSIL) of 200 m thickness over the inland surface, but relatively thin thickness less than 100m is found near the mountain surface. As synoptic scale westerly wind should be intensified under the association of mountain wind along the eastern slope of mountain to inland plain and further combine with land-breeze from inland plain toward sea, resulting in strong wind as internal gravity waves with a hydraulic jump motion bounding up to about 1km upper level in the atmosphere in the west of the city and becoming a eastward return flow. Simultaneously, wind near the eastern coastal side of the city was moderate. Since the downward strong wind penetrated into the city, the particulate matters floated near the top of the mountain in the day also moved down along the eastern slope of the mountain, reaching the. downtown and merging in the ground surface inside the NSIL with a maximum ground level concentration of total suspended particulates (TSP) at 0300 LST. Some of them were bounded up from the ground surface to the 1km upper level and the others were forward to the coastal sea surface, showing their dispersions from the coastal NSIL toward the propagation area of internal gravity waves. On the next day at 0600 LST and 0900 LST, the dispersed particulates into the coastal sea could return to the coastal inland area under the influence of sea breeze and the recycled particulates combine with emitted ones from the ground surface, resulting in relatively high TSP concentration. Later, they float again up to the thermal internal boundary layer, following sea breeze circulation.

• 한국음향학회지
• /
• 제39권3호
• /
• pp.151-162
• /
• 2020

본 논문에서는 음향 역산법을 이용한 기포의 크기 분포 추정 기법을 제시하였다. 제 1종 Fredholm 적분방정식으로 표현된 감쇠계수의 추정오차를 목적함수로 정의하였고, 최적해를 구하기 위해 Levenberg-Marquardt(LM)기법을 적용하였다. 두 가지의 기포 분포에 대한 수치 시뮬레이션을 통해 제안된 역산 기법의 유용성을 검증하였다. 세 종류의 기포발생기를 이용하여 사각 수조(1.0 m × 0.54 m × 0.6 m)에서 기포 실험을 수행하였다. 고속카메라 촬영을 통해 기포의 분포 이미지를 획득하였고, 음원과 수중청음기를 이용하여 기포층의 주파수별 삽입손실(insertion loss)을 계측하였다. 촬영된 이미지는 후처리를 통해 기포 발생기별 기포 분포 특성을 파악하는데 활용하였고, 계측된 삽입손실에 역산 기법을 적용하여 기포의 크기 분포를 추정하였다. 음향 역산결과로부터 기포의 크기가 작아짐에 따라 기포 개수는 지수적으로 증가하며, 70 ㎛ ~ 120 ㎛의 국부 피크를 지난 후 다시 증가하는 경향성을 확인하였다.

• 지구물리와물리탐사
• /
• 제16권4호
• /
• pp.211-216
• /
• 2013

일반적으로 평활화 필터는 주변값들과의 차이를 감소시켜 함수를 정규화하는 역할을 한다. 따라서 완전파형역산에 평활화 필터를 적용하면 역산 해를 정규화 할 수 있으며 실제 지하 구조에 가까운 영상을 얻을 수 있다. 다만 단일 평활화 계수를 사용했을 때는 지층 형태나 속도변화에 관계없이 동일하게 평활화가 이루어지므로 지층간 경계면이나 단층 등의 구조가 불명확해지는 단점이 있다. 본 논문에서는 이러한 문제를 해결하기 위해 단일 평활화 계수가 아닌 역산 반복 과정에 따라 선택적으로 평활화 계수를 조정하는 정규화 기법을 개발하였다. 먼저 파형역산에 적합한 탐사자료의 주파수 대역과 그에 대응하는 파수 범위를 분석하였다. 분석한 파수 범위에 적합한 평활화 계수를 선정하기 위해 평활화 필터의 파수 스펙트럼에서 99백분위수에 해당하는 파수를 유효최대파수로 결정하였다. 선정된 평활화 계수를 반복역산에 따라 다르게 적용하여 여러 주파수를 동시에 이용하는 멀티-스케일 완전파형역산을 구현하였다. 암염 모델과 같은 속도대비가 큰 지질구조에 대해 성공적인 역산결과를 얻음으로써 본 연구에서 개발한 평활화 계수 선택기법이 효과적인 정규화 과정을 구현한다는 것을 알 수 있었다. 또한 무작위 잡음이 더해진 인공합성 음원모음 자료에 대한 수치예제를 통해 현장 자료에 대한 적용 가능성도 확인할 수 있었다.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.339-344
• /
• 2014

Different types of polyethersulfone (PES) support layer for a thin film composite (TFC) membrane were synthesized under various synthesis conditions using the phase inversion method to study the combined effects of substrate, adhesive, and pore former. The permeability, selectivity, pore structure, and morphology of the prepared membranes were analyzed to evaluate the membrane performance. The combined use of substrate, adhesive, and pore former produced a thinner dense top layer, with more straight finger-like pores. The pure water permeation (PWP) of the optimized PES membrane was $27.42L/m^2hr$ (LMH), whereas that of bare PES membrane was 3.24 LMH. Moreover, membrane selectivity, represented as divalent ion ($CaSO_4$) rejection, was not sacrificed under the synthesis conditions, which produced the dramatically enhanced PWP. The high permeability and selectivity of the PES membrane produced under the optimized synthesis conditions suggest that it can be utilized as a potential support layer for TFC membranes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.181-184
• /
• 1999

This paper presents the accurate deembeding method for pad and parasitics of MOSFET device. rad effects are deembedded using THRU LINE, which is much simpler method without laborious fitting procedure compared with conventional OPEN and SHORT pad modeling. Parasitic resistance extraction uses the algebraic relation between increments of inversion layer charge and oxide capacitance. It is especially adequate for insulating gate junction device. Extracted parasitics are verified through comparing modeled and measured S parameters.