• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.123-126
• /
• 2000

This study shows consolidation properties resulted from the experiment made on changes by load increment ratio and consolidation duration of standard consolidation test using deposit soil of Chungju Dam. Though the comparison and analysis of the result turned out that void ratio by load increment ratio was unchanged greatly, the result was inclined as followes : the smaller load increment ratio is, the bigger void ratio is, while the bigger load increment ratio is the bigger settlement is. Also coefficient of consolidation is increased in inverse ratio to load increment ratio. Coefficient of permeability is increased in proportion to load increment ratio, it is not fixed changes by consolidation duration, however. Degree of consolidation is increased to load increment ratio.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.1
• /
• pp.73-79
• /
• 1990

In order to study on the riboflavin content of common foods for Korean and the rates of destruction of riboflavin during cooking 26 kinds of the foods were selected and 3 kinds of menu were cooked by standardized method. For each food item and menu riboflavin content was measured by AOAC method. The experimental values of 13 kinds of food such as rice oak mushroom carrot squarsh tangle dried large anchovy apple(Fuji) dried laver ramyun pork soybean curd fried soybean curd and danmugi were almost consistent with food compo-sition values. Whereas those of 12 kinds of foods such as cabbage onion potato kimchi beef sausage dried medium anchovy hair tail soybean paste and egg were considerably different from food composition table values, up to now Alaskan pollack maize loaf bread hamburger bread etc have not been analyzed in food composition table, The rates of retention of riboflavin in menu 1, 2, and 3 cooked by standardized method were 24% 69% 46% respectively. The overally retention rate was in inverse proportion to the time of sunlight exposure during cooking.

• Journal of the Korean School Mathematics Society
• /
• v.2 no.1
• /
• pp.93-104
• /
• 1999

The subject of this study was the graph of relation of direct inverse proportion, linear function and quadratic function in the 1st, 2nd and 3rd grade of current middle school mathematics curriculum. GSP materials were developed to simplify the principle, trait and characteristics of graphs and make them easier to understand. The overall aim of the materials is to improve the effectiveness of teaching and learning through the utilization of enhanced students' practice. Additionally, the use of the GSP will be useful in the development of mere effective materials. The effectiveness of the GSP materials will be as followings. 1. The step by step approach of GSP materials through computer interaction will enhance students motivation and interest in mathematics. 2. By presenting the subject matter simply and in a variety of ways, difficult concepts can be understood without the use of complex mathematical calculation. 3. The GSP program is different from CAI and other software programs. It should be used only after learning how to input and output data.

• Journal of Korean Society on Water Environment
• /
• v.20 no.4
• /
• pp.352-356
• /
• 2004

Variations of water quality parameters were investigated for last 13 years in Han river. Deviation from 3 month moving average was suggested for the variation analysis. Many parameters of mainstream and tributaries showed similar monthly fluctuations. Suspended solid of mainstream showed higher fluctuation than that of tributaries due to summer flood. Contrarily, the organic parameters such as BOD, COD, and TN showed lower fluctuations in the mainstreams. The magnitude of deviation was in the order of pH < DO, COD, temp. < BOD, TN < TP, SS. Strong correlation was found in BOD data of adjacent sites. Main sites showed low deviation in comparison to adjacent common sites of mainstream (1:2.4). Mainstream showed low deviation in comparison to tributaries (1:1.7). Seasonal tendency of monthly BOD was confirmed using autocorrelation function. The deviation was in inverse proportion to the magnitude of BOD.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.551-558
• /
• 2011

To analyze the effect of wear of wheel profile on the running stability of rolling-stock, theoretical and experimental studies were conducted on the profiles used in conventional lines. In experiment using 1/5 scale model to verify the results of the theoretical analysis, the test results of the critical speed for worn wheel profile samples show similar trend. In case of the conical type wheel profile(Profile 40), the equivalent conicity is increased with flange wear. But in case of the arc type wheel profile(Profile 20h), the equivalent conicity is decreased with flange wear. And the critical speed of the bogie was inverse proportion to the equivalent conicity. It is shown that the variation of the critical speed with the wheel wear could be changed according to the design concept and wear pattern of wheel profile. Results of the theoretical and experimental studies are discussed here.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.846-850
• /
• 2007

In this study debris like branch or trash are washed and flowed from land to stream by rainfall runoff at mountain or urban stream specially rainy season. These kinds of debris are accumulated at hydraulic construct on the way of flow along the stream. The shape or ratio of like these accumulated debris are various according to the location where it is accumulated and the material what it is, so that it is influenced to be varied to flow characteristics. To be simple of accumulated debris shape, it was made experiments though the variation of open ratio and the shape of accumulated debris by lab experiment using straight channel with two piers. From the result, the water level is inverse proportion to open ratio, and the water level more sensitive to the debris‘ width than length at the same area of accumulated debris.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.5 no.2
• /
• pp.63-68
• /
• 1981

Succeding to Report I, to determine the effect of opening conditions and areas of clothes ($10\%,\;20\%,\;30\%,\;40\%$ of total area) on the warmth keeping properties, cooling method was employed by using Latin Square Design, The following results were obtained: 1) The warmth keeping ratio was varied with the opening conditions and the: order was downward, upward, horizontal and up & downward opening 2) The size of opening areas was in inverse proportion to the warmth keeping ratio, 3) In the horizontal opening, the thickness of air layers in clothes did not effect on the warmth keeping ratio.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.981-984
• /
• 2003

A novel linear ultrasonic motor for precision position control was designed and fabricated. It was composed of two piezoelectric actuators with longitudinal ultrasonic fluctuations and shaking beam. When two AC electric fields (Usinwt, Ucoswt) were applied to piezoelectric actuators respectively, the middle part of shaking beam had an elliptical trajectory. According to experimental results, the generative force was proportional to pre-load force but the speed of slider was in inverse proportion. And the bar of shaking beam had a same trajectory with simulation result.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1708-1710
• /
• 1998

In this study, several experiment is executed to analyze properties of Electrodeless Discharge Lamp using H-Discharge. 1. The operating frequency of this lamp is $2.45{\sim}2.65$[MHz] 2. The color of light is mild-white. And, it is shifted in the direction of red in low temperature. 3. In ambient temperature under $10^{\circ}C$, luminous efficiency is decreased precipitously. Therefore, research for improvement discharge-characteristic in low temperature need. 4. Discharge-characteristic stable between $160{\sim}240$[V]. And, luminous output is inverse proportion to coil-voltage. 5. When input-voltage is decreased continuously unstable section exist.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.159-164
• /
• 2012

In this paper, it tried to develop the core sensor for detection of micro magnetic field in electric wires. The sensor is non contact type and is consisted of ferrite core for low price. To investigate their properties for variations of current, it changed the number of winding and the length of sample core, it examined, to check the live wire situation in built-in wires, electrical characteristics due to difference between electric wires and core sensor. As the results, it verified live wire situation at the number of winding(5,000) and within length of 6[cm]. Also, it obtained magnetic field magnitude decreased inverse proportion ratio to a square about difference between electric wires and core sensor.