• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.734-744
• /
• 2013

In this study, the telematics device was installed on the car (OBD-II) to collect the information on the operation conditions from each sample vehicle. Based on the information the domestic driving pattern was analysed and the ratio of cold start length was estimated. As a result of analysis for driving pattern, we found a difference in the frequency of driving on the hourly or seasonal basis. Then, the driving pattern of the rush hours, weekdays, and weekends could be derived. Also, from the study, an average of 2.22 times per day occurred in a single trip and average driving distance for the trip was 15.72 km. In addition, the proportion of cold start length was analyzed to be 16.11%. The seasonal cold start length has big difference from season to season (Winter 26.63%, Summer 8.22%, Intermediate 12.65%). There was an inverse relationship between the outside temperature and ratio of cold start length. In order to improve the accuracy of the cold emission estimation, it is necessary to apply domestic ratio of cold start length that driving pattern and temperature in Korea is reflected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.572-578
• /
• 2017

Haptic systems help users feel a realistic sensation when they manipulate virtual objects in the remote virtual environment. However, there are communication time delays that may make the haptic system unstable. This paper shows the relationship between communication time delay, properties of a haptic device, and the stability of the haptic system with the first-order hold method in a simulation. The maximum available stiffness of a virtual spring with the first-order hold method is larger than in the zero-order hold method when there is no time delay. However, when the communication time delay is much larger than the sampling time, the maximum available stiffness to guarantee the stability becomes the same, irrespective of the sample-hold methods. Besides, the maximum available stiffness increases in inverse proportion to the communication time delay and in proportional to the damping coefficient of the haptic device.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.104-110
• /
• 2007

Temperature rise characteristics of medium voltage class transformers and dielectric characteristics of its insulation oil according to the loading rate were investigated using the transformer that has thermocouples embedded in the windings. The hottest-spot of the transformer locates at about 2/3 height of the windings where they adjoin each other among the 3 phase windings. The temperature difference between the hottest-spot and top-oil is about $17[^{\circ}C]$ and the value keeps uniformly in short time after changing the loading rate. Capacitance of the oil varies in inverse proportion to temperature and the inclination rate is about -0.0106 that is not dependent on the aging rate. On the other hand the capacitance is increased depending on the aging rate, so the capacitance characteristics of the oil could be applied to the diagnostic technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.805-810
• /
• 2016

The dependence of drain induced barrier lowering(DIBL) is analyzed for doping concentration in channel of asymmetric double gate(DG) MOSFET. The DIBL, the important short channel effect, is described as lowering of source barrier height by drain voltage. The analytical potential distribution is derived from Poisson's equation to analyze the DIBL, and the DIBL is observed according to top/bottom gate oxide thickness and bottom gate voltage as well as channel doping concentration. As a results, the DIBL is significantly influenced by channel doping concentration. DIBL is significantly increased by doping concentration if channel length becomes under 25 nm. The deviation of DIBL is increasing with increase of oxide thickness. Top and bottom gate oxide thicknesses have relation of an inverse proportion to sustain constant DIBL regardless channel doping concentration. We also know the deviation of DIBL for doping concentration is changed according to bottom gate voltage.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.1-13
• /
• 1998

Seasonal variation of algae distribution were studied in the Chuam reservoir from August 1996 to July 1997. As a result, 127 taxa were observed, representing 6 classes, 14 orders, 5 suborders, 29 families, 2 subfamilies, 54 genus, 118 species, 7 variaties and 2 formula. The majors of them are Chlorophyceae (59 taxa), Bacillariophyceae(39 taxa) and Cyanophyceae(20 taxa). The number of species was that 35 and 31 taxa were occurred in August 1996 and April 1997, 11 and 17 taxa in July 1997 and October 1996 respectively at Dam station, 53 taxa were occurred in September, 18 taxa in November at Munduck station. The biomass composition of occurrence species were as fallowes; Cyanophyceae are 80%, Bacillariophyceae 14% and Chlorophyceae 5% at Dam station and Cyanophyceae are 90%, Bacillariophyceae 1.3% and Chlorophyceae 0.4% at Munduck at Munduk station. At Munduk station, water bloom occurred by Cyanophyceae(99.9%, 3.7 $\times$ 10$^{7}$ cells/L) in November 1996 and the major causing algae was Microcrystis aeruginosa. Microcystis aeruginosa was dominant species (dominant index : 0.72 - 0.99) during summer and autumn, Fragilaria crotonensis and Asterionella formasa (DI : 0.33 - 0.74) during winter and spring. The water quality factors of the Chuam reservoir were that the values of water temperature ranged of 3.6 - 31.4$\circ$C, pH 6.7 - 9.0, conductivity 69.6-118.2 $\mu $s/cm, and turbidity 1.0-22.5 NTU, and the proper temperature of water for algae growth was 15 and 16.7$\circ $C in April and November. Also the concentration of dissolved oxygen(DO) ranged of 6.8-15.5mg/L, total nitrogen(T-N) 0.54-1.78 mg/L, total phosphrous (T-P) 0.003-0.034 mg/L, and chlorophyll-a 0.9-23.2mg/m$^{3}$. The concentration of Chlorophyll-a was in inverse proportion T-N/T-P ratio.

• Journal of Korean Society of Transportation
• /
• v.17 no.3
• /
• pp.47-60
• /
• 1999

In this study, the dynamic route choice behavior of driver is assumed to be affected by the current conditions of traffic environments as well as the Past traffic environments and activities. The repeated survey of multi-timed to owner drove in Chon-ju city by the virtual traffic information system was performed by the stated preference method. And the LISREL(An analysis of linear structural relationship) model was used. As the results. the variable Parameter and t-value of travel time information on applied model was high and their results have an effect greatly to the route choice. After all, the route choice was negative from Kirin-ro, which Penetrates the downtown, and positive from Chunbyun-ro which was a roundabout way was confirmed. Estimated result of the reasonability, the highest suitable model was ode which applied the concept of serial correlation and stated dependence and was shown applying rightfulness to dynamic model. As the serial correlation and stated dependence parameter value, when time interval was large, parameter value was small and the serial correlation and stated dependence was in inverse proportion ratio to the time interval.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.632-636
• /
• 1993

Gel strength of fish protein at various processing conditions such as heating temperature, heating time and salt content was determined by using compressive stress and residual delay time of ultrasonic wave. The compressive stress, interpreted as indicating the relative gel strength, was increased with increasing the heating temperature and heating time, and with decreasing the salt content, while the delay time of ultrasonic wave reduced, indicating that the gel strength and the delay time are inverse proportion. The result of the multiple regression analysis with factorial design showed that the model equation consisted with delay time and processing condition variables gave the good prediction of the gel compressive stress which was coincided with compressive stress measured.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.4
• /
• pp.35-40
• /
• 2002

Ultra-power-saving SBR has been fabricated by using vanadium and molybdenum with low work function. Because reverse leakage current is increased in inverse proportion to work function, we implanted argon ion on the n-Si layer for decreasing leakage current. The dose and acceleration energy of the argon implantation in the silicon was 1$\times$10$^{14}$ ion/$\textrm{cm}^2$, 40 keV, respectively. The forward voltages drop of fabricated V-SBR and Mo-SBR were 0.25 V and 0.39 V at the same forward current density of 60 A/$\textrm{cm}^2$. As a result, it was found that the reverse leakage current of the fabricated V-SBR was reduced over 20$mutextrm{A}$ by the argon implantation in comparison with the no implanted V-SBR. Also, owing to argon implantation, the inferiority of characteristic of the SBR was not detected.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.259-264
• /
• 2006

In MT and GDS survey for probing the deep structure of the Earth, surrounding seas play a critical role to distort the response of in-land geological structure. This study analyzed the sea effect in the Korean Peninsula and investigated the spatial and frequency dependency of it using 2-D MT modeling. Due to conductance difference between the Yellow Sea and the East Sea, the effect of each sea shows the dependence on frequency and spatial distance from each coastline. In general, TM mode responses are more severely affected by surrounding sea than TE mode one and the differences between 1-D model and TM mode responses are in inverse proportion to the frequency. Assuming that the lowest limit of acquired frequency is 0.001Hz for the given 1-D structure, the separation distance, where the sea effect can be negligible, is approximately 100km for the East Sea and 40-50km for the Yellow Sea, respectively. But, this separation distance is a function of the 1-D electrical structure of subsurface and the used frequency.

• Korean Journal of Environmental Biology
• /
• v.31 no.3
• /
• pp.173-179
• /
• 2013

Population characteristics of Zacco koreanus were investigated at 4 stations in three National Parks of Korea from April to October 2012. Total length ranged 47mm~160 mm and weight ranged 0.50~41.50 g. Parameter b values in length-weight relationships ranged 2.883~3.497, which represent favorable conditions for habitation. Condition factor (K) had the range from 0.689 to 1.012. In relationships with sympatric fishes, the length-weight relationship (b) revealed inverse proportion to the number of species and populations. It is suggested that these differences resulted from the various factors including sympatric fishes, water temperature, seasonal changes, and surveyed stations.