• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2007년도 한국음성과학회 공동학술대회 발표논문집
• /
• pp.281-284
• /
• 2007

This experimental study aims to find out the correlation between semantic predictability and pitch-accent realization. For the experiment, we classified the predictability into three degrees: unpredictable, implicitly predictable, and explicitly predictable. And then each degree divided into to two subcatergories: one is adverbs/adverbial phrases of time or place and the other one is not time or place adverbs/adverbial phrases. The materials used in the experiment were 9 sentences for the each subcategory. One male and one female English native speakers participated in this experiment. Their reading speeches were recorded on Digital Audio Tape. Their speech data were analyzed by using Pitchworks program. The results of this experiment show pitch accented ratio is somewhat in inverse proportion to the degree of predictability.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.123-126
• /
• 2000

This study shows consolidation properties resulted from the experiment made on changes by load increment ratio and consolidation duration of standard consolidation test using deposit soil of Chungju Dam. Though the comparison and analysis of the result turned out that void ratio by load increment ratio was unchanged greatly, the result was inclined as followes : the smaller load increment ratio is, the bigger void ratio is, while the bigger load increment ratio is the bigger settlement is. Also coefficient of consolidation is increased in inverse ratio to load increment ratio. Coefficient of permeability is increased in proportion to load increment ratio, it is not fixed changes by consolidation duration, however. Degree of consolidation is increased to load increment ratio.

• 대한기계학회논문집A
• /
• 제29권11호
• /
• pp.1509-1517
• /
• 2005

This paper presents the two degree-of-freedom(DOF) planar parallel mechanism called 2R$\underline{P}$R-RP manipulator, whose degree-of freedom is dependent on a passive constraining leg connecting the base and the platform. First, the kinematic analysis of the mechanism is performed analytically: the inverse and forward kinematic problems are solved in the closed font the practical workspace is systematically derived, and all of the singular configurations are examined. Then, in order to determine the geometric parameters and the operating limits of the actuators, the optimization of the mechanism is performed considering its dexterity and stiffness. Finally, the kinematic performances of the optimized mechanism are evaluated through comparing to the 5-bar parallel manipulator.

• 제어로봇시스템학회논문지
• /
• 제12권5호
• /
• pp.464-472
• /
• 2006

This paper presents the two degree-of-freedom (DOF) planar parallel mechanism, called the $2{\underline{R}}RR-RP$ manipulator, whose degree-of-freedom is dependent on an additional passive constraining leg connecting the base and the platform. First, the kinematic analysis of the mechanism is performed: the inverse and forward kinematic problems are analytically solved, the workspace is systematically derived, and all of the singular configurations are examined. Then, in order to determine the geometric parameters the optimization of the mechanism is performed considering its dexterity, stiffness, and space utilization. Finally, the kinematic performances of the optimized mechanism are evaluated through the comparison study to the conventional 5-bar parallel manipulator.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.70-73
• /
• 2019

It was confirmed that current flowing in thin films below nm increases conductivity in diffusion currents by holes rather than electric currents by electrons. ZTO thin film, which was heat treated at $150^{\circ}C$, increased electron concentration, and thus increased capacitances. However, it was found that low current movement would be difficult as the degree of movement was reduced. Therefore, it was found that diffusion currents were more advantageous than drift currents by electrons in order to allow low current to be produced in very thin films of nm class.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1324-1333
• /
• 2010

This paper is used in a recent civil engineering field in three-dimensional laser-meter tiles using thermal imaging cameras for the weathered rock slopes precisely measured indirectly, to the degree that began in the will. In the field is difficult to access the degree of weathering of the rock slope to the existing direct way to compensate for the shortcomings of 3D Terrestrial Laser Scanner and weathering characteristics of rocks using thermal imaging cameras to get the information to analyze the degree of rock weathering is. Intensity of 3D TLS and the thermal camera with image analysis to analyze the degree of weathering of bedrock in the field of core drilling targeting indoor laboratory tests were analyzed through the study. Granite, gneiss, sandstone, much of the cancerous samples, each experiment has a 40 per category, each of which 30 were used to analyze the data collected. That degree of rock weathering, the rock, depending on the strength of the Intensity values can change, depending on the level of thermal imaging camera, also weathered the changes in temperature could see. Intensity is the strength of weak rocks, the more value decrease, the temperature of the thermal imaging camera through the swell Intensity and notice that the temperature had an inverse relationship. Intensity value of the low strength of weak rock, but the value came out of the rocks have been proved to be largely dependent on the contrast. The contrast of the surface rocks are weathered dark Intensity values lower temperature to swell the contrary, the degree of weathering can be distinguished.

• 폴리머
• /
• 제30권4호
• /
• pp.286-292
• /
• 2006

Super water-absorbent resins were prepared by inverse suspension copolymerization of sodium acrylate, acrylamide and 2-hydroxyethyl acrylate using N, N'-methylene-bis-acrylamide as cross-linker. For the suspension copolymerization, monohexadecyl phosphate was employed as the dispersing agent, cyclohexane as the dispersing medium and potassium persulfate as the initiator. The dependence of water-absorption capacity on the amount of crosslinking agent, oil/water ratio, degree of neutralization and the composition of the copolymer were systematically investigated. Furthermore, the swelling kinetics of the super water-absorbent copolymer was carried out. The absorption of the resins is more than 1800 g/g for deionized water and 100 g/g for 0.9% NaCl solution, respectively. The copolymers showed an increased salt resistance and enhanced water retention of soil.

• 한국강구조학회 논문집
• /
• 제12권6호
• /
• pp.671-680
• /
• 2000

이 논문은 합성슬래브의 구조적 거동에 관한 것으로, 개방형 형상인 사다리꼴 데크플레이트와 폐쇄형인 역삼각형 상단플랜지 데크플레이트를 사용한 합성슬래브의 실험에 의한 것이다. 그 결과 합성슬래브의 합성거동을 위해서는 데크플레이트의 형상적인 요소가 매우 중요한 변수로 나타났다. 즉 폐쇄형 형상인 역삼각형 데크플레이트가 사다리꼴 형상보다 전단슬립과 처짐에 더 효과적으로 나타났다. 그러므로 합성데크슬래브 용도로 사용되는 데크플레이트의 개발과 사용에 있어 형상적인 요소가 매우 중요하게 취급되어야 하며, 이에 대한 이론적인 평가도 이루어 졌다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권8호
• /
• pp.1051-1056
• /
• 2001

Data for teat number for Landrace (L), Yorkshire (Y), crossbred of Landrace and Yorkshire (LY), and crossbred of Landrace, Yorkshire and Chinese indigenous Min Pig (LYM) were analyzed using Gibbs sampling. In Bayesian inference, flat priors and some informative priors were used to examine their influence on posterior estimates. The posterior mean estimates of heritabilities with flat priors were $0.661{\pm}0.035$ for L, $0.540{\pm}0.072$ for Y, $0.789{\pm}0.074$ for LY, and $0.577{\pm}0.058$ for LYM, and they did not differ (p>0.05) from their corresponding estimates of REML. When inverse Gamma densities for variance components were used as priors with the shape parameter of 4, the posterior estimates were still corresponding (p>0.05) to REML estimates and mean estimates using Gibbs sampling with flat priors. However, when the inverse Gamma densities with the shape parameter of 10 were utilized, some posterior estimates differed (p<0.10) from REML estimates and/or from other Gibbs mean estimates. The use of moderate degree of belief was influential to the posterior estimates, especially for Y and for LY where data sizes were small. When the data size is small, REML estimates of variance components have unknown distributions. On the other hand, Bayesian approach gives exact posterior densities of variance components. However, when the data size is small and prior knowledge is lacked, researchers should be careful with even moderate priors.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.723-729
• /
• 2012

Spring-like leg models have been employed to explain various dynamic characteristics in human walking. However, this leg stiffness model has limitations to represent complex motion of actual human gait, especially the behaviors of each lower limb joint. The purpose of this research was to determine changes of total leg stiffness and lower limb joint stiffness with gait speed in knee osteoarthritis. Joint stiffness defined as the ratio of the joint torque change to the angular displacement change. Eight subjects with knee osteoarthritis participated to this study. The subject walked on a 12 m long and 1 m wide walkway with three sets of four different randomly ordered gait speeds, ranging from their self-selected speed to maximum speed. Kinetic and kinematic data were measured using three force plates and an optical marker system, respectively. Joint torques of lower limb joints calculated by a multi-segment inverse dynamics model. Total leg and each lower limb joint had constant stiffness during single support phase. The leg and hip joint stiffness increased with gait speed. The correlation between knee joint angles and torques had significant changed by the degree of severity of knee osteoarthritis.