• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.698-701
• /
• 1996

A novel neural network control scheme is proposed to identify the inverse dynamic model of robot manipulator and to compensate for uncertainties in robot dynamics. The proposed controller is called reference compensation technique(RCT) by compensating at reference input trajectory. The proposed RCT scheme has many benefits due to the differences in compensating position and learning algorithm. Since the compensation is done outside the plant it can be applied to many control systems without modifying the inside controller. It performs well with low controller gain because the operating range of input values is small and the output of the neural network controller is amplified through the controller gain. The back-propagation algorithm is used to train and simulations of three link robot manipulator are carried out to prove the proposed controller's performances.

• 한국항행학회논문지
• /
• 제14권2호
• /
• pp.176-182
• /
• 2010

본 논문에서는 역 E-급 증폭기 출력 회로의 병렬 공진기를 주파수에 대해 가변되도록 회로를 구성하여 넓은 주파수 범위에서 높은 전력부가효율과 출력전력을 유지하는 방법을 제안하였다. 여기서 사용된 병렬 공진기는 동작 주파수에 따라서 Q 값은 동일하고, 가변 특성을 얻기 위해서 바렉터 다이오드를 사용하여 인덕터와 캐패시터를 만들었으며, 전류 영점 교차를 위한 인덕턴스 성분은 집중소자로 또, 위상 보상을 위한 캐패시턴스는 분포소자로 구현하였다. 역 E-급 증폭기의 주파수 가변 특성을 통해서 효율과 출력 전력을 확인한 실험 결과는 65-120MHz의 주파수 범위에서 증폭기는 최대 75%의 전력부가효율과 25dBm의 출력전력을 얻었다.

• Investigative Magnetic Resonance Imaging
• /
• 제22권4호
• /
• pp.209-217
• /
• 2018

Purpose: The objective of this study was to obtain improved susceptibility weighted images (SWI) of the cervical spinal cord using respiratory-induced artifact compensation. Materials and Methods: The artifact from $B_0$ fluctuations by respiration could be compensated using a double navigator echo approach. The two navigators were inserted in an SWI sequence before and after the image readouts. The $B_0$ fluctuation was measured by each navigator echoes, and the inverse of the fluctuation was applied to eliminate the artifact from fluctuation. The degree of compensation was quantified using a quality index (QI) term for compensated imaging using each navigator. Also, the effect of compensation was analyzed according to the position of the spinal cord using QI values. Results: Compensation using navigator echo gave the improved visualization of SWI in cervical spinal cord compared to non-compensated images. Before compensation, images were influenced by artificial noise from motion in both the superior (QI = 0.031) and inferior (QI = 0.043) regions. In most parts of the superior regions, the second navigator resulted in better quality (QI = 0.024, P < 0.01) compared to the first navigator, but in the inferior regions the first navigator showed better quality (QI = 0.033, P < 0.01) after correction. Conclusion: Motion compensation using a double navigator method can increase the improvement of the SWI in the cervical spinal cord. The proposed method makes SWI a useful tool for the diagnosis of spinal cord injury by reducing respiratory-induced artifact.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.502-505
• /
• 2005

Researches about micro technology travel lively in these days. Such many researches are concentrated in the field of materials and a process field. But properties of micro materials should be known to give results of research developed into still more. In these various material properties, mechanical property such as tensile strength, elastic modulus, etc is the basic property. To measure mechanical properties in micro or nano scale, actuating must be very precise. PZT is a famous actuator which becomes a lot of use to measure very precise mechanical properties in micro research field. But PZT has a nonlinearity which is called as hysteresis. Not precision result is caused because of this hysteresis property in PZT actuator. Therefore feedback control method is used in many researches to prevent this hysteresis of PZT actuator. Feedback control method produce a good result in processing view, but cause a loss in a resolution view. In this paper, hysteresis is compensated by open loop control method. Hysteresis property is modeled in Mathematical function and compensated control input is constructed using inverse function of original data. Reliability of this control method can be confirmed by testing nickel thin film that is used in MEMS material broadly.

• ETRI Journal
• /
• 제27권5호
• /
• pp.491-496
• /
• 2005

An application specific processor for an H.264 decoder with a configurable embedded processor is designed in this research. The motion compensation, inverse integer transform, inverse quantization, and entropy decoding algorithm of H.264 decoder software are optimized. We improved the performance of the processor with instruction-level hardware optimization, which is tailored to configurable embedded processor architecture. The optimized instructions for video processing can be used in other video compression standards such as MPEG 1, 2, and 4. A significant performance improvement is achieved with high flexibility. Experimental results show that we could achieve 300% performance for the H.264 baseline profile level 2 decoder.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.411-413
• /
• 1992

This paper proposes a simple and high performance hybrid position/force control of robots based on disturbance compensation by using the disturbance observer in task coordinate space. The disturbance observer linealizes system of robot manipulators in task coordinate space and realizes acceleration control. To realize the strict acceleration control, the disturbance observer whose input is a position signal by simple computation, works as if it were a disturbance detector. The inverse kinematics can be simplified, because the disturbance observer in task coordinate space compensates not only the disturbance but also the error due to the simplification of the inverse kinematics. The new strategy is applied to a three-degrees-of freedom direct drive robot. The robust and simple hybrid position/force control is realized experimentally.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2003년도 공동 춘계학술대회 논문집
• /
• pp.22-25
• /
• 2003

EOC(Electro Optical Camera)는 한반도 및 전 세계 육지 영역 관측용으로 설계되었다. EOC는 1999년 12월 21일 발사된 다목적 실용위성 1호에 탑재되어 가시광 대역(510 ～730nm)으로 입사하는 복사 정보를 수집해 왔다. 획득된 EOC 영상 자료는 다목적 실용위성 1호의 탑재체 자료전송 시스템(Payload Data Transmission System, PDTS)을 통해 지상으로 전송되며, 수신된 자료에 대한 방사 보정 및 기하 보정 등의 일련의 전처리(Pre-processing) 과정을 거쳐 EOC 표준 영상이 생성된다. EOC 영상에 대한 MTF 보상은 방사 보정 후 수행될 수 있으며, 다목적 실용위성 지상국에서는 사용자의 요구에 따라 EOC 영상에 대한 MTF 보상을 수행하고 그 결과를 제공한다. MTF 보상은 EOC의 점 확산 함수(Point Spread Function)를 이용하여 수행되며, 현재 Wiener 필터를 이용하여 수행되고 있다. 본문에서는 현재 다목적 실용위성 1호 영상처리시스템의 EOC 영상에 대한 MTF 보상을 소개하고, EOC의 점 확산 함수에 기초하여 역 필터(Inverse Filter) 및 의사 역 필터(Pseudo Inverse Filter)를 제작, EOC 영상에 대한 MTF 보상 수행 후 그 결과를 Wiener 필터를 이용한 결과와 비교, 분석한다.

• ETRI Journal
• /
• 제31권6호
• /
• pp.709-716
• /
• 2009

In this paper, we propose a novel reconfigurable processor using dynamically partitioned single-instruction multiple-data (DP-SIMD) which is able to process multimedia data. The SIMD processor and parallel SIMD (P-SIMD) processor, which is composed of a number of SIMD processors, are usually used these days. But these processors are inefficient because all processing units (PUs) should process the same operations all the time. Moreover, the PUs can process different operations only when every SIMD group operation is predefined. We propose a processor control method which can partition parallel processors into multiple SIMD-based processors dynamically to enhance efficiency. For performance evaluation of the proposed method, we carried out the inverse transform, inverse quantization, and motion compensation operations of H.264 using processors based on SIMD, P-SIMD, and DP-SIMD. Experimental results show that the DP-SIMD control method is more efficient than SIMD and P-SIMD control methods by about 15% and 14%, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.679-684
• /
• 1989

In this paper, we describe the PTP notion of robot manipulators by neural networks. The PTP motion requires the inverse kinematic redline and the joint trajectory generation algorithm. We use the multi-layered Perceptron neural networks and the Error Back Propagation(EBP) learning rule for inverse kinematic problems. Varying the number of hidden layers and the neurons of each hidden layer, we investigate the performance of the neural networks. Increasing the number of learning sweeps, we also discuss the performance of the neural networks. We propose a method for solving the inverse kinematic problems by adding the error compensation neural networks(ECNN). And, we implement the neural networks proposed by Grossberg et al. for automatic trajectory generation and discuss the problems in detail. Applying the neural networks to the current trajectory generation problems, we can refute the computation time for trajectory generation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1820-1823
• /
• 1997

For the Cartesian space position controlled robot, it is required to have the accurate mapping from the Cartesian space to the joint space in order to command the desired joint trajectories correctly. since the actual mapping from Cartesian space to joint space is obtained at the joint coordinate not at the actuator coordinate, uncertainty in Jacobian can be present. In this paper, two feasible neural network schemes are proposed to compensate for the kinematic Jacobian uncertainties. Uncertainties in Jacobian can be compensated by identifying either actuator Jacobian off-line or the inverse of that in on-line fashion. the case study of the stenciling robot is examined.