• 에너지공학
• /
• 제25권1호
• /
• pp.108-112
• /
• 2016

본 연구에서는 국내 원전 산업의 데이터 기반 설계기법 전환을 위하여 관련 문헌을 조사하고 데이터 기반 설계기술에 대한 개념을 정립하였다. 또한 국내외 원전 산업 기술동향 분석을 통해 데이터 기반 설계통합시스템 Framework 개발 및 관련 주요기능을 도출하였다. 국내 원전 건설 시 최신 설계통합시스템 적용에 따라 이를 활용하는 제작사, 시공사 및 발주자의 업무수행 방식 또한 전면적인 전환을 위한 원전 건설단계별 업무프로세스 개선방향을 도출하였다. 이는 기자재 3D 모델 통합, 3D CAD 모델생성, 시공검토 Simulation 등 모델기반 현장설계 수행이 가능하며, 현장설계에서 발생하는 모든 설계도면 및 관련 정보가 데이터 기반 3D CAD 시스템으로 통합관리가 가능하여 이를 운영단계에 이관하여 O&M 단계에서 데이터 기반 운영체계가 가능함에 따라 발전소 안전 운영에 향상이 기대된다.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.189-195
• /
• 2010

ERP system has been spreaded from large companies to many small and medium sized companies, and it is recognized as a basic system for optimum and efficient work process. The focus is moving from manufacturing companies to various specialized companies. Once ERP system was introduced to those specialized companies, there was attempt to customize an ordinary system which used in manufacturing companies, but it was hard to take effect due to the lack of experience and an inadequate analysis of work process. Some of foreign ERP packages are possible to be constructed for some companies. However, they are originally aim at a large enterprise and it is also very difficult to construct and maintain. For this reason, small and midium sized companies are having a difficulty to construct ERP system. This study deals with the construction of ERP system for small and medium sized design engineering company and introduction of the crucial points throughout the construction and requirements for composition module and customization of each main module. Based on the findings of this study, the specialized non-manufacturing companies are expected to have efficient and practical application of ERP system when they select and customize the ERP package of manufacturing companies.

• 한국해양공학회지
• /
• 제28권1호
• /
• pp.20-27
• /
• 2014

In view of the importance of material reduction and rational structural design due to the rapid increase in oil and steel prices, an optimized structural hybrid design system for the doubler plate of a ship's hull structure was developed. A direct design process by a structural designer was added to this developed optimized system to increase the design efficiency and provide a way of directly inserting a designer's decisions into the design system process. As the first step of the doubler design system development, the design formulas used in doubler design system were introduced. Based on the introduction of influence coefficients $K_{t_c}$ $K_{t_d}$, $K_{b_d}$ and $K_{a_d}$ according to the variations in the doubler length, breadth, doubler thickness, and average corrosion thickness of the main plate, the design formulas for an equivalent plate thickness were developed, and a hybrid design system using these formulas was suggested for the slender doubler plate of a ship structure subjected to a longitudinal in-plane compression load. By using this developed design system, a more rational doubler plate design can be expected considering the efficient reinforcement of the plate members of ship structures. Additionally, a more detailed structural analysis through local strength evaluations will be performed to verify the efficiency of the optimum structural design for the doubler plate.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.87-97
• /
• 2016

The new generation of nuclear power plants (NPPs) will likely make use of state-of-the-art technologies in many areas of the plant. The analysis, design, and selection of advanced human-system interfaces (HSIs) constitute an important part of power plant engineering. Designers need to consider the new capabilities afforded by these technologies in the context of current regulations and new operational concepts, which is why they need a more rigorous method by which to plan the introduction of advanced HSIs in NPP work areas. Much of current human factors research stops at the user interface and fails to provide a definitive process for integration of end user devices with instrumentation and control and operational concepts. The current lack of a clear definition of HSI technology, including the process for integration, makes characterization and implementation of new and advanced HSIs difficult. This paper describes how new design concepts in the nuclear industry can be analyzed and how HSI technologies associated with new industrial processes might be considered. It also describes a basis for an understanding of human as well as technology characteristics that could be incorporated into a prioritization scheme for technology selection and deployment plans.

• 제어로봇시스템학회논문지
• /
• 제6권10호
• /
• pp.854-870
• /
• 2000

This survey paper presents and overview on eigenstructure assignment (EA) control design methodologies. EA is an excellent control design method which may be used to assign the entire eigenstructure(eigenvalues, and right or left eigenvectors) of a closed-loop linear system via a full state or an output feedback control law. In general, EA is well-sutied for incorporating classical specifications on damping, settling time, and mode or disturbance decoupling into a modern multivariable control framework. The purpose of this paper is to provide an extensive survey on EA control design methods that might serve as an introduction to a study on EA. The fundamental concepts and formulations for understanding EA problems are extensively described. The recently reported results on EA are also presented.

• 대한임베디드공학회논문지
• /
• 제4권1호
• /
• pp.16-22
• /
• 2009

This paper aims at designing an impulse-radio ultra-wideband (IR-UWB) transceiver, especially targeting the IEEE 802.15.4a indoor ranging and communication systems. We first investigate the IEEE 802.15.4a IR-UWB signals and suggest the full-digital transceiver architecture accordingly. Since the wireless systems equipped with the impulse signal have the property of low-duty cycle, i.e., discontinuity in time, while the conventional systems takes the continuous signals, it is required to reconfigure the system design, including link budget. Following brief introduction to our IEEE 802.15.4a IR-UWB system hardware, we finally examine the ranging performance in indoor environments to verify our system design.

• Ecology and Resilient Infrastructure
• /
• 제6권1호
• /
• pp.69-76
• /
• 2019

생태계는 우리의 생존과 삶의 질을 유지할 수 있게 하여 인간 복지에 직, 간접적으로 기여하고 있다. 그래서 생태적 기능의 계량화 방법이 필요하다. 본 연구에서는 응용생태공학에 생태계서비스를 도입하고 적용하는 것에 대하여 논의하였다. 하천의 경제적 가치, 도시 블루-그린-화이트 네트워크 구축, 생태복원 및 통합 물관리에 생태계서비스 개념 및 평가체계를 적용할 수 있는 방안을 모색하였다. 생태계서비스 개념 틀과 평가는 이해해당사자의 생태계 혜택 이해에 도움을 주고 응용생태공학 적용을 증가시켜 생태적 보호와 복원 가치의 증진에 이용될 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.569-580
• /
• 2008

If slope height was more than 20 meters, we conducted an analysis of stereographic projection and limit equilibrium at this slope. We proposed reduction of slope face angle and reinforcement of rock bolt depending on analysis. Blasting design : Standard pattern based on result of local test blasting was made for blasting design. Vibration criterion was set for less than 3.0mm/s because of outworn buildings and inhabitants opinions. Production blasting and Controlled blasting has been done as Construction standard pattern. After Vibration Monitoring has been done, so that we can control of complement. "Bidding Document" and AASHTO 2001 "A Policy on Geometric Design of Highways and Streets" were so for design criteria of earthwork but they were different actual design criteria and left something to be desired in Afghanistan. Therefore, although "Bidding Document" and "AASHTO 2001" were basic design criteria, domestic design criteria was reflected in this design criteria for complement by discussion with supervisor. Drainage design : For stability ratio, ditch of arch block and stonework was designed by rainfall data for the 13 years and discussion with supervisor. Pavement was designed as flexible pavement. Because these days in Afghanistan postwar repair works, especially urgent repairing of roads and newly making of roads, are very highly in progress, I think that Afghanistan is the region about which our construction technical experts should have great concerns.

• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.99-118
• /
• 2018

최근 토목구조물의 설계에 있어 한계상태설계법 적용이 세계적인 추세이나, 국내에서는 소수의 구조물에 국한되어 사용되고 있다. 주요 지중구조물인 터널에 대해서는 한계상태설계법의 도입이 근래에 시도되고 있으므로, 최신의 한계상태 설계법에 대한 이해가 반드시 필요하다. 본 연구는 최근 발간된 AASHTO LRFD Road Tunnel Design and Construction Guide Specification (2017)을 토대로 세그먼트 터널라이닝 설계 시 구조물 하중계수, 하중조합 등을 고찰하고 이외에 구조 검토 시 반영되어야 할 다양한 영향인자에 대해 분석하였다. 본 연구에서는 국내에 적용되고 있는 전력구, 지하철 터널 단면을 대상으로 한 세그먼트 라이닝의 구조해석을 통하여, 지반조건과 하중수정계수, 이음부 강성조건 등 다양한 영향인자들이 부재력에 미치는 영향을 분석 평가하였다.

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.281-293
• /
• 2014

Although there have been a lot of BIM R&Ds in the civil engineering and their applications to the real projects, BIM in the field is still known to be behind the other areas. One of the reasons for this should be that the civil projects is generally too public for private participants to try new technologies, but it is mainly because the projects are so huge and complex that we still have the working environment where the systematic information sharing or exchanging is not smooth enough. In this paper, we are verifying the possibility and proposing the direction of BIM information standardization technology in civil engineering based on the integrated BIM information standard framework. For this purpose, after reviewing the introduction plan for BIM information framework, we applied it to an actual civil structure for test. The implementation result proved that the framework has possibility and effectiveness for the takeoff and construction cost calculation, which confirmed the standard framework needs to be extended consistently. This study is expected to contribute to the standard system establishment and its technology propagation for BIM development in the civil engineering.