• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.487-493
• /
• 2017

본 연구의 목적은 한국형포장설계법 프로그램을 이용하여 아스팔트포장에 발생하는 주요 파손 유형인 평탄성(IRI, International Roughness Index), 피로균열, 소성변형 등에 영향을 주는 요소를 평가하는 것이다. 평가에 사용된 설계입력변수로는 지역구분(서울과 부산), 교통량조건, 아스팔트 바인더, 표층용 골재의 최대치수, 아스팔트 표층 두께, 아스팔트 기층의 두께 등을 적용하였다. 해석조건은 위의 변수를 조합하여 총 64개의 case study를 수행하여, 이들 결과를 상호 비교 평가하여 아스팔트 포장의 파손에 영향을 주는 변수의 중요도를 평가하였다. 기본조건에서 1개의 변수에 의한 영향 고려시, 서울지역 5000대/일 교통량의 경우 아스팔트 바인더(C)의 영향이 다른 요소에 비해 상대적으로 크게 나타났고, 나머지 요소 중에서는 기층두께(A), 표층두께(B), 골재입도두께(D) 순으로 결과를 나타내었다. 10,000대/일 교통량의 경우도 마찬가지로 똑같은 결과 값이 나타났다. 부산지역 5000대/일 교통량의 경우 서울지역과 마찬가지로 아스팔트 바인더(C)의 영향이 다른 요소에 비해 상대적으로 크게 나타났고, 나머지 요소중에는 서울지역과 다르게 기층두께(A), 골재입도두께(D), 표층두께(B) 순으로 결과를 나타내었다. 교통량 조건과 지역에 따라 다소 차이는 있었지만, 아스팔트 포장 파손에 가장 큰 영향을 주는 요소는 아스팔트 바인더이고, 2가지 조합의 경우 아스팔트 바인더와 기층의 두께 등으로 평가되었다.

• 대기
• /
• 제21권4호
• /
• pp.415-427
• /
• 2011

In this study, the impacts of land surface conditions, land cover (LC) map and leaf area index (LAI), on the short-range weather forecast over the East-Asian region were examined using Unified Model (UM) coupled with the MOSES 2.2 (Met-Office Surface Exchange Scheme). Four types of experiments were performed at 12-km horizontal resolution with 38 vertical layers for two months, July and August 2009 through consecutive reruns of 72-hour every 12 hours, 00 and 12 UTC. The control experiment (CTRL) uses the original IGBP (International Geosphere-Biosphere Programme) LC map and old MODIS (MODerate resolution Imaging Spectroradiometer) LAI, the new LAI experiment (NLAI) uses improved monthly MODIS LAI. The new LC experiment (NLCE) uses KLC_v2 (Kongju National Univ. land cover), and the new land surface experiment (NLSE) uses KLC_v2 and new LAI. The reduced albedo and increased roughness length over southern part of China caused by the increased broadleaf fraction resulted in increase of land surface temperature (LST), air temperature, and sensible heat flux (SHF). Whereas, the LST and SHF over south-eastern part of Russia is decreased by the decreased needleleaf fraction and increased albedo. The changed wind speed induced by the LC and LAI changes also contribute the LST distribution through the change of vertical mixing and advection. The improvement of LC and LAI data clearly reduced the systematic underestimation of air temperature over South Korea. Whereas, the impacts of LC and LAI conditions on the simulation skills of precipitation are not systematic. In general, the impacts of LC changes on the short range forecast are more significant than that of LAI changes.

• 한국지반신소재학회논문집
• /
• 제10권3호
• /
• pp.1-8
• /
• 2011

본 논문에서는 유리섬유시트 형태의 토목섬유로 보강된 아스팔트 포장의 내구성 증진효과와 공용성 평가를 위해 덧씌우기 시험시공 구간의 장기 추적조사를 수행하였다. 토목섬유 보강 아스팔트 포장의 보강효과를 비교하기 위해 개질아스팔트와 일반아스팔트 구간 및 토목섬유 보강 구간 등 6개 구간으로 구분하여 공용성 평가를 수행하였다. 공용성 평가를 위한 평가항목으로 소성변형, 균열율, 처짐량, 종단평탄성을 조사하였다. 공용성 평가를 위한 조사장비로 ARAN과 FWD를 이용하였으며, 또한 육안조사를 통해 시험시공 포장면의 균열발생과 변형상태 조사를 수행하였다. 추적조사결과, 토목섬유 보강 아스팔트는 토목섬유를 보강하지 않은 아스팔트 포장에 비해 균열저항성이 우수하며 공용기간이 증가함에 따라 소성변형과 균열이 서서히 증가하는 것을 알 수 있다.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.17-24
• /
• 2015

PURPOSES : Recently, crack, rutting, and stripping problems from the surface of asphalt pavements in National highway are observed and they affect the drivers to feel uncomfortable on the road. Surface treatments are recommended to use in distressed pavements due to cost-effective, and improvement of surface performance. The purpose of this study is to evaluate the performance of micro-surfacing and polymer slurry seal treatments for distressed asphalt pavements. METHODS : Surface conditions and friction resistance are evaluated for asphalt pavements treated with micro-surfacing and polymer slurry seal mixes in National highway 30 line and 34 line. Visual observation is conducted and surface performance is measured by PES (Performance Evaluation Surveyor) in terms of crack ratio, rutting and IRI(International Roughness Index). BPN(British Pendulum Number) is measured by BPT(British Pendulum Tester) to evaluate the friction resistance in the field. RESULTS : The surface evaluation results are presented for asphalt pavement treated with micro-surfacing and polymer slurry seal treatments in National highway 30 line and 34 line. Based on the visual observation, micro-surfacing and polymer slurry seal treatments show better improvements in terms of cracks and stripping. Based on the surface conditions measured by PES vehicle, the surface performance of micro-surfacing treatments improves from 53.3% to 54.2% and the surface performance of polymer slurry seal treatments improves from 21.6% to 59.7%. However, the friction resistance of both micro-surfacing and polymer slurry seal treatments decreases from 2.5% to 6.7%. Further, it should be verified to produce the surface exposed with aggregates during the construction process of both treatment methods in the field. CONCLUSIONS : Based on the performance evaluation results in the filed, the surface performance of asphalt pavement treated with micro-surfacing and polymer slurry seal treatments improves from 21.6% to 59.7%. While, the friction resistance of asphalt pavement treated with micro-surfacing and polymer slurry seal treatments does not improve. It can be concluded that current micro-surfacing and polymer slurry seal treatments would improve surface performance but would not improve the friction resistance.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.11-19
• /
• 2014

PURPOSES : The purpose of this article is to investigate the predicted life of jointed concrete pavement (JCP) with two variables effecting on axle load spectra (ALS). The first variable is different data acquisition methods whether using high-speed weigh-in-motion (HS-WIM) or not and the other one is spectra distribution due to overweight enforcement on main-lane of expressway using HS-WIM. METHODS : Three sets of ALS had been collected i) ALS provided by Korea Pavement Research Program (KPRP), which had been obtained without using HS-WIM ii) ALS collected by HS-WIM before the enforcement at Kimcheon and Seonsan site iii) ALS collected after the enforcement at the same sites. And all ALS had been classified into twelve vehicle classes and four axle types to compare each other. Among the vehicle classes, class 6, 7, 10 and 12 were selected as the major target for comparing each ALS because these were considered as the primary trucks with a high rate of overweight loading. In order to analyze the performance of JCP based on pavement life, fatigue crack and International Roughness Index (IRI) were predicted using road pavement design program developed by KPRP and each ALS with same annual average daily traffic (AADT) was applied to design slab thickness. RESULTS : Comparison ALS of KPRP with those of HS-WIM shows that the ALS of KPRP has a low percentage of heavy spectra such as 6~9 tonnes for single axle, 18~21 tonnes for tandem axle and 27~30 tonnes for tridem axle than other two ALS of HS-WIM in most vehicle classes and axle types. It means that ALS of KPRP was underestimated. And after the enforcement, percentage of heavy spectra close to 10 tonnes per an axle are lowered than before the enforcement by the effect of overweight enforcement because the spectra are related to overweight regulation. Prediction results of pavement life for each ALS present that the ALS of HS-WIM collected before the enforcement makes the pavement life short more than others. On the other hand, the ALS of KPRP causes the longest life under same thickness of slab. Thus, it is possible that actual performance life of JCP under the traffic like ALS of HS-WIM could be short than predicted life if the pavement was designed based on ALS provided by KPRP. CONCLUSIONS : It is necessary to choose more reliable and practical ALS when designing JCP because ALS can be fairly affected by acquisition methods. In addition, it is important to extend performance life of the pavement in service by controlling traffic load such as overweight enforcement.

• 한국지리정보학회지
• /
• 제10권1호
• /
• pp.35-46
• /
• 2007

본 연구에서는 수치영상을 이용하여 아스팔트 콘크리트포장 도로를 대상으로 차량에 비디오 카메라를 설치하여 도로에서 일정하게 차량속도를 유지하면서 촬영된 수치 영상정보로 객체 지향적인 언어인 Delphi를 이용하여 도로노면정보(균열, 소성변형, 종평탄성)를 획득할 수 있는 도로노면 관리시스템을 개발하고, 개발된 시스템은 동영상 및 그래프를 이용하여 시각화 효과를 증진시킬 수 있도록 하였다. 다중영상표정과 광속조정법에 의해 결정된 도로노면의 3차원 좌표의 정확도를 분석한 결과 표준 오차의 평균은 X방향으로 0.0427m, Y방향으로 0.0527m, Z방향으로 0.1539m로 나타났다. 이 값은 우리나라에서 현재 제작하여 사용하고 있는 축척 1:1,000 이하의 지도제작 및 GIS 자료로서 충분히 활용성이 있다. 수치영상을 이용하여 12개소에 대하여 균열폭의 정확도를 분석한 결과 표준오차가 ${\pm}0.256mm$로 정밀도가 아주 높게 나타났으며, 또한 소성변형량을 비교하기 위하여 4개소의 실측된 횡단면과 영상으로부터 추출된 횡단면을 비교한 결과 최대 오차는 10.80mm로 나타났으나, 작업능률면에서는 실용성이 있다고 판단된다.