• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.2
• /
• pp.123-132
• /
• 2014

The maritime sector is advancing with dedicated endeavor to reduce greenhouse gas in addressing issues with regards to global warming. Since 01 January 2013, the International Maritime Organization (IMO) regulation mandatory requirement for Energy Efficiency Design Index (EEDI) has been in place and should be satisfied by newly-built ships of more than 400 gross tonnage and the Ship Energy Efficiency Management Plan (SEEMP) for all ships type. Therefore, compliance to this necessitates planning during the design stage whereas verification can be carried-out through an acceptable method during sea trial. The MEPC-approved 2013 guidance, ISO 15016 and ISO 19019 on EEDI serves the purpose for calculation and verification of attained EEDI value. Individual ships EEDI value should be lower than the required value set by these regulations. The key factors for EEDI verification are power and speed assessment and their synchronization. The shaft power can be measured by telemeter system using strain gage during sea trial. However, calibration of shaft power onboard condition is complicated. Hence, it relies only on proficient technology that operates within the permitted ISO allowance. On the other hand, the ship speed can be measured and calibrated by differential ground positioning system (DGPS). An actual test on a newly-built vessel was carried out to assess the correlation of power and speed. The Energy-efficiency Design Index or Operational Indicator Monitoring System (EDiMS) software developed by the Dynamics Laboratory-Mokpo Maritime University (DL-MMU) and Green Marine Equipment RIS Center (GMERC) of Mokpo Maritime University was utilized for this investigation. In addition, the software can continuously monitor air emission and is a useful tool for inventory and ship energy management plan. This paper introduces the synchronization and identification method between shaft power and ship speed for EEDI verification in accordance with the ISO guidance.

• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.1-9
• /
• 2012

Since accommodation, public space and service areas where people stay for all day occupy about 70% of a huge cruise ship, they have to be protected from the fire. International Maritime Organization has resolved that a water mist system should be equipped in this cruise ship according to SOLAS II-2 Reg. 10.6 and FSS code Ch. 7. The water mist system consists of mist nozzles, pressure vessels, section valves and pump unit etc. In particular, the water mist nozzles should be recognized by fire tests in accordance with IMO Res. MSC 265(84). In this study, the fire tests for cabin, corridor, public space and storage area have been conducted to develop the water mist nozzles appropriate to the regulation. Totally 5 types of nozzles were developed and have satisfied the whole performance requirements.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.1
• /
• pp.39-61
• /
• 1994

GMDSS(the Global Maritime Distress and Safety System), which is utilizing recently developed systems such as satellite communications and positioning system, digital communication system, computer and microelectronics technology, etc., has been adopted by International Maritime Orgnization(IMO) and coordina-ted with such organization as the International Telecommunication Union(ITU), World Meteorological Organizatoion(WMO), etc. This system took effect partly on February 1st 1992 according to the 1988 SOLAS Amemdments and, after some more complementary measures, will be fully operational by February 1st 1999. Comparing with the existing communication system, the new system is mainly based on the latest scientific technologies, and therefore overall countermeasure will be necessary to accept the system reasonably. GMDSS will transform the current communication system basically and be the major factor to change the demand and supply of personnel for radio communication. To cope with the system assertively, regulations relating to the radio installation, the posting of radio operators, the bounds of their duty, etc. must be established and the demand and supply of radio operators to meet the system must be accomplished pertinently. Moreover, the technique and quality of the person-nel responsible for the system must be upgraded to carry out the obligations by international regulations as well as to ensure the safety of life and property at sea. Looking into the actual situations of our country, every regulation relating to the GMDSS has been improved, but the concerned educational institutions and administrations have not yet prepared the rational and concrete schemes on the educational methods and adquate procedures for the system. Therefore, in this thesis, the author intends to propose directions for improving the courses and contents of education of the relating educational institutions and to suggest rational schemes for balancing the demand and supply of personnel to the administrative anthorty concerned.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.6
• /
• pp.13-20
• /
• 2014

It is necessary to design a compressor with high pressure ratio that satisfies the IMO(international maritime organization) NOx emission regulation for the marine diesel engine. Impeller was designed using the modified slip factor with the flow coefficient. The main purpose of this study is to investigate the sensitivity of the compressor performance by the vaned diffuser geometries. The first vaned diffuser type was based on a NACA airfoil, the second was channel diffuser, and the third was conformally transformated configuration of a NACA65(4A10)06 airfoil. The sensitivity of the performance was calculated using a commercial CFD program for three different diffuser geometries. The channel diffuser showed the wide range of operation and higher pressure characteristics, comparing with the others. This is attributed to the flow stability at diffuser. Combined with this results with impeller design, the optimized compressor was designed and verified by the test results.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.3
• /
• pp.263-272
• /
• 2019

The aim of this study is to develop a rapid calculation technique of the residual strength in order to prevent sequential events under grounding accidents. Very Large Crude-Oil Carrier (VLCC), Suezmax, and Aframax double hull oil tankers carrying large quantities of crude oil were selected for target structures. The rock geometries are chosen from the published regulation by Marine Pollution Treaty (MARPOL) of the International Maritime Organization (IMO). Oceanic rocks as the most frequently encountered obstruction with ships are applied in this work. Damage condition was predicted using ALPS/HULL program based on grounding scenario with selected parameters, i.e. depth of penetration, damage location and tanker type. The results of the scenarios are quantified to form an empirical formula which can evaluate the residual strength. The proposed formula is validated by applying a series of random grounding scenarios.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.2
• /
• pp.135-142
• /
• 2024

There is a lot of concern around the world about air pollution from ships. The majority of air pollution from ships comes from fuel combustion. The combustion process produces various air pollutants such as carbon monoxide (CO), carbon dioxide (CO₂), nitrogen oxides (NOx), sulfur oxides (SOx), and particulate matter (PM), each of which has adverse effects on people and is a major environmental problem. To prevent this, the International Maritime Organization (IMO) has strengthened the regulation of pollutant emissions through the Convention for the Prevention of Marine Pollution. This paper discusses the types of air pollutants emitted by ships, their current status, and the latest technologies to reduce emissions of NOx and SOx.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.398-407
• /
• 2018

Standard guidelines for marine accident investigation have been prepared through the enforcement of the Casualty Investigation code as of January 2010. In addition, as the International Maritime Organization (IMO) recommended contracting the state to manage a marine incident system established under this code, Korea also has newly established provisions for a marine incident system in the 'Act on the Investigation of and Inquiry into Marine Accidents' also as of 2010. The Korean Maritime Safety Tribunal (KMST) has made a multilateral effort to prevent marine accidents through the efficient operation of a marine incident system, but this system has not been properly activated. This study examines the operational status and problems of a marine incident system and analyzes the marine incident systems of foreign countries and similar transportation agencies such as railroads and aviation. Options include switching to voluntary reporting of marine incidents, transferring responsibility to a non judicial private organization, expanding incentive systems for a marine incidents, revising regulation and preparing detailed implementation guidelines.

• Journal of Korea Port Economic Association
• /
• v.38 no.3
• /
• pp.29-51
• /
• 2022

The International Maritime Organization (IMO) designated the Emission Control Area (ECA) in Northern Europe to reduce the NOx and SOx emissions from ships in the coastal areas. This study used Network slack-based measure (SBM) Data Envelopment Model (DEM) and Bootstrop Truncated Regression (BTR) model to analyze the ECA's impact on ferry companies' financial performances based on the financial data from eight ferry carriers in Northern Europe, the Mediterranean and North America from 2004 to 2017. To alleviate the problem of arbitrary variable selection in DEA, the variable selection criteria proposed by Dyson et al. (2001) were applied; the size of the company was considered through the Network SBM DEA model; and the company's profit-generating process was divided into stages to measure financial performance in more detail. In addition, the BTR model was applied to derive results that minimize the bias of the data. The study found that ECA regulations did not always negatively affect the shipping companies' financial performance. Rather, a steady increase in efficiency was observed for Northern European ferry companies which were subject to the strongest regulations. For North American ferry companies, government subsidies were found to have a significant impact on efficiency, and relatively small impact on efficiency due to the ECA and oil prices. For the Mediterranean ferry companies, efficiency values have decreased since the implementation of ECA regulation despite the lowest level of regulation in the region.

• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.69-89
• /
• 2014

The business performance of port industry is steadily getting worse due to international environmental regulation. The port industry should be prepared according to ambient condition change. IMO(International Maritime Organization) is tightening up environmental regulation of vessel and maritime industry field. ECA(Emission Control Area), starting with the Baltic, has initialized and has been expanded. Korea must strengthen the control of vessel in accordance with IMO's restriction, if Korea is designated as emission control area. These situations cause the expansion of LNG-fuelled ships. Add to the larger trend of ships, Korean government should be done a preemptive action against LNG bunkering industry. This study proposes the concept of floating offshore LNG bunkering system and is conducted its economic feasibility evaluation based on empirical analysis. We examine the theoretical foundation and basic information via "A Planning Study on the Engineering Development of Floating Offshore LNG Bunkering Terminal" in 2013 and we evaluate the business potential by using the report above mentioned. The results of this study are as follows. The values of B/C analysis are between 0.679 and 2.516 depending on market share and R&D contributiveness. In case of 10.9%(market share), if market share are 50% and 60%, the value of B/C analysis are 0.697 and 0.837 respectively. Except in two cases, all remaining values are over 1.0. Moreover, the research is conducted sensitivity analysis to remove the project uncertainty. In order to maintain economical validity, a project manager have to establish business strategies which are not to cause increase of expense and sustain market share and R&D contributiveness in the scenario with normal levels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.270-276
• /
• 2019

According to the International Maritime Organization (IMO) 2020 Regulation, ships operating outside designated emission control areas (ECA) have to use low-sulfur oil with a sulfur content of 0.5% or less by January 2020. To minimize the consumption of high-priced low-sulfur oil, it is urgent to introduce efficient energy-saving devices (ESD), and contra-rotating propeller (CRP) systems are well known to be the most effective one. The shafting system that drives a CRP is composed of an inner shaft and an outer one and has a mutually influential system that is much more complex and heavier than a general shafting system. An initial design was carried out to install a CRP system for the first time in Korea. The purpose of this study is to verify whether the journal bearing meets the classification's design criteria through a bearing reaction force analysis for the classification's approval of the initial design. It is ideal for the thrust of the propeller to act on the center of the shaft, but thrust eccentricity occurs due to the uneven wake caused by the stern shape. Load conditions were applied while considering thrust eccentricity to perform the shaft analysis, and the results were compared with the classification's criteria.