• 한국재료학회지
• /
• 제18권10호
• /
• pp.558-563
• /
• 2008

TiAlN films were deposited on WC-5Co substrates with different buffer layers by D.C. magnetron sputtering. The films were evaluated by microstructural observations and measuring of preferred orientation, hardness value, and adhesion force. As a process variable, various buffer layers were used such as TiAlN single layer, TiAlN/TiAl, TiAlN/TiN and TiAlN/CrN. TiAlN coating layer showed columnar structures which grew up at a right angle to the substrates. The thickness of the TiAlN coating layer was about $1.8{\mu}m$, which was formed for 200 minutes at $300^{\circ}$. XRD analysis showed that the preferred orientation of TiAlN layer with TiN buffer layer was (111) and (200), and the specimens of TiAlN/TiAl, TiAlN/CrN, TiAlN single layer have preferred orientation of (111), respectively. TiAlN single layer and TiAlN/TiAl showed good adhesion properties, showing an over 80N adhesion force, while TiAlN/TiN film showed approximately 13N and the TiAlN/CrN was the worst case, in which the layer was destroyed because of high internal residual stress. The value of micro vickers hardness of the TiAlN single layer, TiAlN/TiAl and TiAlN/TiN layers were 2711, 2548 and 2461 Hv, respectively.

• 터널과지하공간
• /
• 제23권3호
• /
• pp.228-240
• /
• 2013

퇴적암에서 나타나는 이방성은 층리에 의한 영향이 크며, 암석의 수리적 특성에도 영향을 주게 된다. 본 연구에서는 층리가 발달한 다공질 사암을 대상으로, 층리구조에 의해 발생한 공극구조 이방성이 사암의 수리 이방성에 미치는 영향을 분석하였다. 사암의 공극구조 이방성 파악을 위해 X-ray CT(computed tomography)를 이용하여 내부 공극률의 변화양상을 분석하였다. 층리방향에 따른 수리이방성은 층리면과 수평면이 이루는 각도를 $0^{\circ}$에서 $90^{\circ}$까지 $15^{\circ}$간격으로 코어링한 샘플을 제작하여 투수실험을 통해 파악하였다. 투수실험 결과 층리면과 투수방향이 수직인 경우 투수율이 가장 작은 값을 나타낸 반면, 층리면과 투수방향이 평행일 때 가장 높은 투수율을 나타내었으며, 평균 수리이등방비($k_{90^{\circ}}/k_{0^{\circ}}$)가 1.8로 층리에 따른 수리 이방성이 확연하게 나타났다. 또한, 이러한 사암의 수리이방특성은 층리에 의해 공극특성이 서로 다른 층상구조가 형성되기 때문임을 확인하였다.

• 식물조직배양학회지
• /
• 제25권3호
• /
• pp.153-158
• /
• 1998

Arabidopsis thaliana에 beet curly top virus (BCTV)를 인공접종하여 외부병징 및 조직내부구조 변화를 광학현미경으로 검경하였다. BCTV-Logan에 접종된Arbidopsis thaliana ecotype Sei-O 줄기에서 약 2주 후 이상비대현상이 관찰되었고, 약 4주 후에는 캘러스조직이 형성되었다. 감염된 각 시기별로 증상부위의 Sei-O 줄기를 횡단절단하여 관찰한 결과 다음과 같은 순서, (1) 사부조직의 이상비대, (2) 이상비대된 사부의 괴사, (3) 괴사조직의 lacuna 형성, (4) lacuna형성된 사부 주위의 피층과 표피세포 신장 및 확대, (5) 신장된 피층 및 표피세포에서의 세포분열 유도, (6) 캘러스 조직의 유도 순으로 내부구조 변화가 관찰되었다. BCTV에 감염된 Arabidopsis에서의 캘러스 형성은 바이러스의 감염결과로 유도되었으며, azure-A염색법에 의해 바이러스 inclusion body는 사부조직과 캘러스에서도 존재함이 관찰되었다. 본 연구 결과 BCTV에 감염된 Arabidopsis에서 관찰된 캘러스 형성의 원인은 감염된 숙주식물의 사부조직의 괴사에 따른 lacuna 주위 피층세포의 세포분열에 기인한 것으로 사료된다.

• 비파괴검사학회지
• /
• 제28권4호
• /
• pp.364-371
• /
• 2008

소듐냉각고속로 원자로 내부구조물의 소듐내부가시화를 위한 새로운 웨이브가이드 초음파센서를 개발하였다. 소듐냉각고속로에 적용할 수 있는 웨이브가이드 초음파센서 어셈블리의 구조 설계 개념을 제시하고 그 적용 타당성을 평가하였다. 길이가 10 m인 웨이브가이드 초음파센서 어셈블리를 제작하고 성능평가 시험을 수행하였다. $A_0$ 모드 판파의 장거리 전파 성능을 확인하였으며, 수중 C-스캔 분해능 성능시험을 수행하여 웨이브가이드 초음파센서의 적용 가능성을 실험적으로 검증하였다.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.715-742
• /
• 2017

Earth berms are often left in place to support retaining walls or piles in order to eliminate horizontal struts in excavations of soft soil areas. However, if the excavation depth is relatively large, an earth berm-supported retaining system may not be applicable and could be replaced by a multi-bench retaining system. However, studies on multi-bench retaining systems are limited. The goal of this investigation is to study the deformation characteristics, internal forces and interaction mechanisms of the retaining structures in a multi-bench retaining system and the failure modes of this retaining system. Therefore, a series of model tests of a two-bench retaining system was designed and conducted, and corresponding finite difference simulations were developed to back-analyze the model tests and for further analysis. The tests and numerical results show that the distance between the two rows of retaining piles (bench width) and their embedded lengths can significantly influence the relative movement between the piles; this relative movement determines the horizontal stress distribution in the soil between the two rows of piles (i.e., the bench zone) and thus determines the bending moments in the retaining piles. As the bench width increases, the deformations and bending moments in the retaining piles decrease, while the excavation stability increases. If the second retaining piles are longer than a certain length, they will experience a larger bending moment than the first retaining piles and become the primary retaining structure. In addition, for varying bench widths, the slip surface formation differs, and the failure modes of two-bench retained excavations can be divided into three types: integrated failure, interactive failure and disconnected failure.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.215-226
• /
• 2020

The aim of this study is to investigate free vibration of functionally graded porous nanocomposite rectangular plates where the internal pores and graphene platelets (GPLs) are distributed in the matrix either uniformly or non-uniformly according to three different patterns. The elastic properties of the nanocomposite are obtained by employing Halpin-Tsai micromechanics model. The GPL-reinforced plate is modeled using a semi-analytic approach composed of generalized differential quadrature method (GDQM) and series solution adopted to solve the equations of motion. The proposed rectangular plates have two opposite edges simply supported, while all possible combinations of free, simply supported and clamped boundary conditions are applied to the other two edges. The 2-D differential quadrature method as an efficient and accurate numerical tool is used to discretize the governing equations and to implement the boundary conditions. The convergence of the method is demonstrated and to validate the results, comparisons are made between the present results and those reported by well-known references for special cases treated before, have confirmed accuracy and efficiency of the present approach. New results reveal the importance of porosity coefficient, porosity distribution, graphene platelets (GPLs) distribution, geometrical and boundary conditions on vibration behavior of porous nanocomposite plates. It is observed that the maximum vibration frequency obtained in the case of symmetric porosity and GPL distribution, while the minimum vibration frequency is obtained using uniform porosity distribution.

• 폴리머
• /
• 제34권4호
• /
• pp.321-325
• /
• 2010

피브로인은 실크섬유에서 대량으로 얻어지는 생물고분자이며 수술 봉합사로 장기간 사용되어 생체적합성이 확인되었다. 따라서, 본 연구에서는 생체재료로 사용할 수 있는 피브로인 미립구를 제조하였다. 데칸과 혼합유화제로 이루어진 연속상에 재생 피브로인 액적을 분산시킨 후 건조시켜 형성된 미립구를 회수하여 에탄올 등으로 세척 건조 후 수득하였다. 안정한 유중수형(W/O) 에멀션을 600 rpm으로 교반하는 조건하에서 구형의 피브로인 미립구를 얻 을 수 있었다. 주사전자현미경 사진을 통하여 상압 및 감압하에서 건조된 미립구의 수평균 직경은 각각 21.6 및 8.5 ${\mu}m$로 확인되었다. 토모그래피로 미립구는 내부구조가 채워져 있으나 크기에 따라 중공미립구임을 확인하였고 중탄 산나트륨을 도입하여 중공미립구도 제조하였다.

• 대한원격탐사학회지
• /
• 제21권1호
• /
• pp.91-98
• /
• 2005

On board satellite magnetometer measures all possible magnetic components, such as the core and crustal components from the inner Earth, and magnetospheric, ionospheric and' its coupled components from the outer Earth. Due to its dipole and non-dipole features, separation of the respective component from the measurements is most difficult unless the comprehensive knowledge of each field characteristics and the consequent modeling methods are solidly constructed. Especially, regional long wavelength magnetic signals of the crust are strongly masked by the main field and dynamic external field and hence difficult to isolate in the satellite measurements. In particular, the un-modeled effects of the strong auroral external fields and the complicated behavior of the core field near the geomagnetic poles conspire to greatly reduce the crustal magnetic signal-to-noise ratio in the polar region relative to the rest of the Earth. We can, however, use spectral correlation theory to filter the static lithospheric and core field components from the dynamic external field effects that are closely related to the geomagnetic storms affecting ionospheric current disturbances. To help isolate regional lithospheric anomalies from core field components, the correlations between CHAMP magnetic anomalies and the pseudo-magnetic effects inferred from satellite gravity-derived crustal thickness variations can also be exploited, Isolation of long wavelengths resulted from the respective source is the key to understand and improve the models of the external magnetic components as well as of the lower crustal structures. We expect to model the external field variations that might also be affected by a sudden upheaval like tsunami by using our algorithm after isolating any internal field components.

• ALGAE
• /
• 제33권4호
• /
• pp.291-304
• /
• 2018

Lyngbya C. Agardh ex Gomont is a nonheterocytous cyanobacterial genus whose evolutionary history is still poorly known. The traditionally defined Lyngbya has been demonstrated to be polyphyletic, including at least five distinct clades, some of which have been proposed as new genera. Intraspecific diversity is also clearly underestimated in Lyngbya due to the lack of unique morphological characters to differentiate species. In this study, we describe the new genus Capillus T. A. Caires, C. L. Sant'Anna et J. M. C. Nunes from benthic marine environments, including two new Brazilian species (here described as C. salinus T. A. Caires, C. L. Sant'Anna et J. M. C. Nunes, and C. tropicalis T. A. Caires, C. L. Sant'Anna et J. M. C. Nunes), and two species yet to be described, one of them from India (Capillus sp. 2.1), and the other from United States of America, based on strain PCC 7419. Capillus species presented cross-wise diagonal fragmentation, assisted or not by necridic cells, which has not been previously mentioned for Lyngbya. Ultrastructural analyses showed that C. salinus and C. tropicalis have numerous gas vesicles, which are rarely described for benthic marine species. The new genus formed a well-supported clade, and the D1-D1' and Box B secondary structures of internal transcribed spacer also supported the proposal of its new species. These findings help to clarify the diversity of species in the Lyngbya complex and the taxonomy of the group, and highlight the need of further floristic surveys in tropical coastal environments, which remain poorly studied.

• Smart Structures and Systems
• /
• 제2권2호
• /
• pp.115-126
• /
• 2006

The Terra-Scope system is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. They are expected to cost approximately $6000 each. An internal 16-bit, extremely low power MCU controls all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage. Each Pod measures 3-D acceleration, tilt, azimuth, temperature, and other parametric variables such as pore water pressure and pH. Each Pod communicates over a standard digital bus (RS-485) through a completely web-based GUI interface, and has a power consumption of less than 400 mW. Three-dimensional acceleration is measured by pure digital force-balance MEMS-based accelerometers. These accelerometers have a dynamic range of more than 115 dB and a frequency response from DC to 1000 Hz with a noise floor of less than $30ng_{rms}/{\surd}Hz$. Accelerations above 0.2 g are measured by a second set of MEMS-based accelerometers, giving a full 160 dB dynamic range. This paper describes the system design and the cooperative shared-time scheduler implemented for this project. Restraints accounted for include multiple data streams, integration of multiple free agents, interaction with the asynchronous world, and hardened time stamping of accelerometer data. The prototype of the device is currently undergoing evaluation. The first array will be installed in the spring of 2006.