• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.123-136
• /
• 2019

This study examines the effect of collector well installed to reduce groundwater level in the regions with the occurrence of landcreep, a soil mass movement triggered by instability on slopes. Slopes are prone to failure as a result of instability caused by its internal, topographic and geological properties as well as due to external factors such as rainfall and earthquake. In Korea during the rain season, rainfall infiltration affects the groundwater level in soil, building up porewater pressure and load, and finally drives slopes to collapse. Slope failure caused by rainfall infiltration has been leading to a drastic forest degradation. The studied slope is located adjacent to a valley, its terrain corresponds to piedmont gentle slope, while the upper part of the failure surface is steep. After reinforcing the terrain where landcreep had occurred and installing collector well on the slope, we measured the changes in the groundwater level. In order to analyze the relationship between the well and the slope, we calculated the ratio of groundwater level to rainfall before and after the installation of the collector well. As a result, it is confirmed that the ratio increases after the installation of the well, which in turn reduces the groundwater level. Analysis of the change in groundwater level after 3, 7, 15 days antecedent rainfall showed that the higher the overall groundwater level, the less the value ($r_p$) of groundwater level-rainfall ratio is, while the value becomes relatively greater when the groundwater level is low. In particular, if a slope has a large catchment basin as is in the case of the studied site, antecedent rainfall affects groundwater level in the order of 3 < 7 < 15 days.

• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.23-35
• /
• 2019

Landslides occur due to heavy rainfall in the summer season. Some of water may infiltrate into the ground; it causes a high saturation condition capable of causing a landslide. Soil properties are crucial in estimating slope stability and debris flow occurrence. The main study areas are Gwanaksan, Suraksan and Bukhansan (Mountain) in Seoul. A total of 44 soil samples were taken from the study area; and a series of geotechnical tests were performed. Physical and mechanical properties were obtained and compared based on region. As a result, among well-graded soils, they are classified as a clayey sand. Coarse-grained and fine-grained contents are approximately 95% and 5%, respectively, with very low amount of clay content. Density, liquid limit and dry unit weight are ranged in $2.62{\sim}2.67g/cm^3$, 27.93~38.15% and $1.092{\sim}1.814g/cm^3$. Cohesion and internal friction angle are 4 kPa and $35^{\circ}$ regardless of mountain area. Coefficient of permeability is varied between $3.07{\times}10^{-3}{\sim}4.61{\times}10^{-2}cm/sec$; it means that it results in great seepage. Permeability is inversely proportional to the uniformity coefficient and is proportional to the effective particle size. In the formal case, there was a difference by mountain area, while in the latter, the tendency was almost similar.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.414-421
• /
• 2022

Subsea oil and gas exploration is increasingly moving into deeper water depths, and typically, subsea pipelines operate under high pressure and temperature conditions. Owing to the difference in these components, the axial force in the pipe is accumulated. When a pipeline is operated at a high internal pressure and temperature, it will attempt to expand and contract for differential temperature changes. Typically, the line is not free to move because of the plane strain constraints in the longitudinal direction and soil friction effects. For a positive differential temperature, it will be subjected to an axial compressive load, and when this load reaches a certain critical value, the pipe may experience vertical (upheaval buckling) or lateral (snaking buckling) movements that can jeopardize the structural integrity of the pipeline. In these circumstances, the pipeline behavior should be evaluated to ensure the pipeline structural integrity during operation in those demanding loading conditions. Performing this analysis, the correct mitigation measures for thermal buckling can be considered either by accepting bar buckling but preventing the development of excessive bending moment or by preventing any occurrence of bending.

• Tunnel and Underground Space
• /
• v.32 no.2
• /
• pp.160-172
• /
• 2022

The design regulations for simple explosive storage in Korea only stipulate standards for the materials and thickness of the wall of the structure because the amount of explosives that can be stored is small. There is concern about secondary damage during an internal explosion in a simple storage facility, and it is necessary to reexamine the current standards. The numerical analysis for the TNT 15 kg explosion inside the simple storage was carried out by setting the factors using the robust experimental design method. The displacement of the structure generated under the same time condition was analyzed, and the contribution was evaluated. The contribution of concrete thickness was the highest, and the contribution of concrete strength and rebar arrangement was lower than that of concrete thickness. The reinforcement diameter contributed extremely little to the displacement. The structural standards of the simple storage that are currently applied are insufficient on blast resistance, and it is necessary to present new design standards. Therefore, the design factor to be applied later analysis and actual experiments were taken into consideration. For the design variables, the thickness of the concrete was 15 cm considering the displacement, the concrete strength was selected as general concrete considering the inlet discharge pressure, the factor with the lowest average displacement was selected for the reinforcement arrangement and the diameter of the reinforcement, the factor with the smallest level was selected in consideration of economic feasibility because the difference in displacement was low.

• Smart Media Journal
• /
• v.11 no.5
• /
• pp.75-81
• /
• 2022

In order to respond to carbon neutrality and climate change in agriculture, agricultural machinery, which has been developed centered on internal combustion engines, needs to be converted to an electric-based technology that does not emit greenhouse gases. In this study, simulations for electric UTV suspension design were performed to reduce vibration and shock of electric UTV for agricultural use and to improve driving stability and control performance of the vehicle. The simulation was performed by dividing the tolerance load of the vehicle body and the loaded load state. The range of motion of the suspension spring of UTV is within 30% of the range of motion under condition B under tolerance, the displacement of the UTV suspension with full load is reduced from 264mm to 121mm, and the damping speed is 260mm/s to 300mm/s that it can be seen that the range of motion is within 60%. Suspension design of electric UTV for multi-purpose agricultural work is a very important factor for maintaining agricultural work ability in towing work such as tillage as well as driving and terrain adaptation. The results of this study can be usefully used to determine the spring parameters with the appropriate damping range so that the electric UTV can be used for various agricultural tasks.

• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.218-229
• /
• 2022

We have investigated reliable inspection methods for finding the defects generated during the manufacturing process of lightweight, large-aperture satellite telescope mirrors using silicon carbide, and we have measured the basic physical properties of the mirrors. We applied the advanced ceramic material (ACM) method, a combined method using liquid-silicon penetration sintering and chemical vapor deposition for the carbon molded body, to manufacture four SiC mirrors of different sizes and shapes. We have provided the defect standards for the reflectors systematically by classifying the defects according to the size and shape of the mirrors, and have suggested effective nondestructive methods for mirror surface inspection and internal defect detection. In addition, we have analyzed the measurements of 14 physical parameters (including density, modulus of elasticity, specific heat, and heat-transfer coefficient) that are required to design the mirrors and to predict the mechanical and thermal stability of the final products. In particular, we have studied the detailed measurement methods and results for the elastic modulus, thermal expansion coefficient, and flexural strength to improve the reliability of mechanical property tests.

• Journal of Internet of Things and Convergence
• /
• v.9 no.2
• /
• pp.61-69
• /
• 2023

In recent years, due to heightened environmental awareness, Electric Power Steering (EPS) has been increasingly adopted as the steering control unit in manufactured vehicles. This has had numerous benefits, such as improved steering power, elimination of hydraulic hose leaks and reduced fuel consumption. However, for EPS systems to respond to actions, sensors must be employed; this means that the consistency of the sensor's linear variation is integral to the stability of the steering response. To ensure quality control, a reliable method for detecting defects and assessing linearity is required to assess the sensitivity of the EPS sensor to changes in the internal design characters. This paper proposes a data-driven defect and linearity assessment monitoring system, which can be used to analyze EPS component defects and linearity based on vehicle speed interval division. The approach is validated experimentally using data collected from an EPS test jig and is further enhanced by the inclusion of a Graphical User Interface (GUI). Based on the design, the developed system effectively performs defect detection with an accuracy of 0.99 percent and obtains a linearity assessment score at varying vehicle speeds.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.6-6
• /
• 2022

Prolonged Russia-Ukraine war, and unstable situation of supply and demand of global crops including the COVID-19 pandemic have raised awareness regarding food crisis, and in addition to this situation, export restriction measures imposed by some countries have accelerated the rise in the prices. Since the Republic of Korea depends annual crop consumption (21.32 million tons) mostly on the imports (food self-sufficiency rate in 2020 was 45.8%, crop self-sufficiency rate was 20.2%), our main task is to stably secure food. Now we need to put focus on building capacity to secure stable food supply, and actively manage and respond to risks. To overcome this condition, the Korean government set robust food sovereignty as its policy task, and has been focusing on the policy capacity by providing financial and policy support in parallel. We need to implement mid- to long-term measures to strengthen food security as well as to ensure domestic price stability. While increasing the domestic capacity to supply food in the mid- to long-term perspective, we are implementing projects to bring in crops which are inevitable to be imported by private companies. Specifically, we are making efforts to expand infrastructure for the public reserve and domestic production of wheat and beans which have low self-sufficiency rate, and to secure food sovereignty by providing support to secure global crop supply chain to private companies. The Ministry of Agriculture, Food and Rural Affairs plans to set a target for food self-sufficiency rate and prepare a policy to strengthen mid- to long-term food security by establishing a task force to strengthen mid- to long-term food security in the Ministry. Especially, although wheat is the second staple food, domestic wheat production and the foundation for the industry is poor. Compared to the wheat imports, domestic production of wheat is 30 thousand tons (self-sufficiency rate of 1%), leading to a vulnerable status against internal and external shocks. Through the establishment of the Wheat Industry Promotion Act (Feb. 2020) and the First Master Plan for Wheat Industry Promotion (Nov. 2020), the Korean government has developed a policy basis, and has been providing financial support in overall across the production, distribution and consumption process. In addition, the government established a production complex for Korean wheat and beans in order to supply affordable government-supplied commodities, provide education and consulting services, and create a high-quality stable production system, including facilities and equipment. We are also continuing to increase the public reserve for wheat and beans with the purpose of stable supply and demand as well as food security. The Korean government will establish and implement mid- to long-term measures to strengthen the foundation for domestic production across production, distribution and consumption process, and to stably secure global supply chain including through diversified import channels.

• Korean Journal of Culture and Social Issue
• /
• v.15 no.1
• /
• pp.169-186
• /
• 2009

This study aims to investigate the relationship between personality, especially temperament and subjective well-being. The participants were 681 college students (211 males and 470 females), whose ages ranged from 17 to 37 (M=20.91, SD=2.36). The instruments utilized in the present study were Korean Version of BAS/BIS Scale, The Big Five Locator, Satisfaction with Life Scale, Life Satisfaction Motivation Scale, Life Satisfaction Expectancy Scale, Emotion Frequency Test, and Subjective Happiness Scale. Result indicated that women expected more positive future than men did, while no gender differences were found in any other well-being variables. Correlational analyses revealed that emotional stability and extroversion were closely associated with life satisfaction, happiness, positive and negative emotion, whereas behavioral activation system (BAS) and behavioral inhibition system (BIS) were more closely associated with motivation to live and expectancy of satisfactory life. There was close relationship between conscientiousness and subjective well-being, because they were college students. As a internal factor, personality was better predictor for subjective well-being of female students. For instance, it accounted for around 35% variance of female's subjective happiness. The present findings reiterate the role of personality in quality of life, and it was discussed with characteristics of subjects, situational factors, and previous studies.

• Korean Journal of Culture and Social Issue
• /
• v.10 no.1
• /
• pp.147-163
• /
• 2004

The present research investigated and compared stress coping strategies of North Korean refugees with those of South Koreans in the purpose to predict and prepare psychological conflicts expected to occur during the Korean reunification. Adapted from Han, Hur, Chae, and Kim(2001), North Korean refugees recorded their coping strategies that they would employ in stressful situations varying in term of three aspects of stress causes - 2(locus: internal/external) × 2(stability: temporal/enduring) × 2(context: individual/interpersonal) - and the responses were classified in terms of three dimensions(active/passive, approach/avoidance, cognitive/affective/behavioral). In the temporal stress situations, adaptive North Korean refugees preferred active over passive, approaching over avoiding, and behavioral over cognitive/affective stress coping strategies more than maladaptive North Korean refugees did. Also, in the stressful situations caused by external causes, they were more likely to take active rather than passive, approaching rather than avoiding copying. Although active copying strategies were preferred to passive ones by adaptive North Korean refugees in individual stressful situations, approaching copying strategies were preferred to avoiding ones by them in interpersonal stressful situations. These findings were found to be different from the pattern of South Korean's stress coping strategies in the same situations. In conclusion, the differences were discussed in the view of psychological integration during Korean reunification.