Acknowledgement
이 연구는 농림축산식품부 농림식품기술기획평가원의 첨단농기계산업화기술개발사업의 지원으로 수행되었음(과제번호:2021300029)
References
- 박용준, 박성목, 김성빈, "차량용 서스펜션 Side load 스프링 역설계," 제7회 EDISON SW 활용 경진대회, 35-45쪽, 대전광역시, 대한민국, 2018년 2월
- 이춘태, "차량 현가장치 성능향상을 위한 댐퍼 최적화 설계에 대한 연구," Journal of Drive and Control, Vol. 15 No. 4, 74-80쪽, 2018년 12월 https://doi.org/10.7839/KSFC.2018.15.4.074
- 권성자, 김명수, 이봉주, "농촌 다목적 모듈형 전기차 개발에 관한 연구," Journal of the Korea Convergence Society, Vol. 11. No. 6, pp. 173-182, 2020 https://doi.org/10.15207/JKCS.2020.11.6.173
- 박석호, 김영중, 임동혁, 김충길, 김혁주 외, "트랙터 PTO 출력과 농작업 부하 특성", Journal of Biosystems Eng, Vol. 35, No. 1, pp.15-20, Feb. 2010 https://doi.org/10.5307/JBE.2010.35.1.015
- Shijil P, "DESIGN AND ANALYSIS OF SUSPENSION SYSTEM FOR AN ALL TERRAIN VEHICLE," International Journal of Scientific & Engineering Research, Vol. 7, pp. 164-190, Mar. 2016.
- M. S. Talbott, J. Starkey, "An Experimentally Validated Physical Model of a High-Performance Mono-Tube Damper," Proceedings of the 2002 SAE Motor Sports Engineering Conference and Exhibition, Dec. 2002.
- Y. Ho et al., "Shock Absorber Modelling and Simulation Based on Modelica," Proceedings of 8th Modelica Conference, pp. 843-846, 2011.
- C. T. Lee et al., "A Study on the Nonlinear Dynamic Modeling and Analysis of Damping Force Characteristics of Automotive Shock Absorber," Transaction of the Korean Society of Automotive Engineers, Vol. 11, No. 1, pp. 104-111, 2003.
- C. T. Lee and J. K. Lee, "A Study on the Influence of Design Parameters on the Automotive Shock Absorber Performance," Journal of the Korean Society of Precision Engineering, Vol. 20, No. 6. pp. 167-177, 2003.
- B. T. Jang, "Genetic Algorithm Theory and Application", The journal of Korea Institute of Electronics Engineers, Vol. 22, No. 11, pp. 1290-1300, 1995.
- A. C. Mitra et al., "Optimization of Passive Vehicle Suspension System by Genetic Algorithm," Procedia Engineering, Vol. 144, pp. 1158-1166, 2016. https://doi.org/10.1016/j.proeng.2016.05.087
- C. T. Lee, "A Study on the Optimal Design of Automotive Gas Spring," Journal of Drive and Control, Vol. 14, No. 4, pp. 45-50, 2017. https://doi.org/10.7839/KSFC.2017.14.4.045
- M. S. Chang et al., "A Study of the Hydraulic Circuit Model for a Magnetorheological Damper Analysis," Journal of Drive and Control, Vol. 14, No. 1, pp. 8-13, 2017 https://doi.org/10.7839/KSFC.2017.14.1.008
- H. H. Lang, "A Study of the Characteristics of Automotive Hydraulic Dampers at High Stroking Frequencies", Ph. D. dissertation, University of Michigan, 1977.