• Journal of People, Plants, and Environment
• /
• v.24 no.5
• /
• pp.469-483
• /
• 2021

Background and objective: If the Nelumbo nucifera spreads in a wetland at a high density, it can have considerable positive and negative ecological effects on habitats. For this reason, it is necessary to precisely investigate the impacts of its rapid proliferation. This study was conducted to propose the distribution and management of N. nucifera, which can cause the degradation of wildlife habitats due to the rapid spread of internal and external environmental factors that may affect the Junam wetland ecosystem. Methods: For the investigation and analysis of physical and ecological characteristics, factors of the abiotic environment such as general weather conditions, topography and water depth structure, and soil and water quality analysis, and bioenvironment characteristics such as changes in the N. nucifera community distribution were evaluated. To assess whether the differences in the soil depth and physicochemical characteristics between the N. nucifera community and the aquatic plant community are statistically significant, a One-way ANOVA was executed. Results: N. nucifera was presumably introduced in approximately 2007 and observed at a prevalence of only 0.8% in 2009, but had expanded to 11.1% in 2014. After that, the area was increased to 19.3% in 2015 and 40.0% in 2017, about twice that of the previous survey year. The rapid diffusion of an N. nucifera colony can have adverse effects on wildlife habitats and biodiversity at Junam Wetland. To solve these problems, four management methods can be proposed; water level management, mowing management, installation of posts and removal of lotus roots. Control of the N. nucifera community using these methods was judged to be suitable for cutting and water level management when considering expansion rate, water level variation, and wildlife habitat impacts. Conclusion: As the biotic and abiotic environmental factors are different for each wetland, it is necessary to determine the timing and method of management through a detailed investigation.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.115-122
• /
• 2023

The hip joint device is an important immobilization device for internal rotation in the diagnosis of bone density test, microfracture, and arthritis. These fixing mechanisms have limitations in maintaining reproducibility due to the use of Velcro. In this study, we developed an improved hip joint device and evaluated its usefulness. For 30 students enrolled in the Department of Radiology, we evaluated the reproducibility through medical imaging and the time required for positioning by applying the conventionaling and improved device. Changes over time were also evaluated. As a result, compared to the conventional device, the improved device showed a 32% reduction in positioning time and improved reproducibility by about 6.2 times. As for the amount of change over time, the positioning time increased in the conventional device, but decreased in the improved device, and the reproducibility of the conventional device was lower than that of the improved device. Through this, it can be said that the use of the improved device improved the image quality and reduced the radiologist's workload.

• Journal of Korean Clinical Nursing Research
• /
• v.28 no.1
• /
• pp.13-22
• /
• 2022

Purpose: Extravasation of diagnostic and therapeutic materials might occur when the intravascular solution leaks into the surrounding tissues. Injury associated with extravasation depends on various factors. It may range from mild skin reaction to severe necrosis. However, the incidence rate for extravasation is largely unknown because of the limited reporting in Korea. Therefore, this study was conducted to identify the incidence of extravasation and nurses' attitude and knowledge of extravasation for providing high-quality nursing care. Methods: Three acute care hospitals were surveyed to estimate the occurrence of extravasation. Knowledge and attitude toward extravasation were investigated from 793 nurses working in six hospitals. Results: The incidence rate of extravasation was 0.5%. Extravasation commonly occurred in elderly patients aged 66 or older (59.9%) and internal medicine (48.2%), and it happened 13.73±20.68 days after hospitalization on average. It mostly occurred in the forearm site (52.9%) and was mainly caused by parenteral nutrition (33.6%). The mean scores of nurses' knowledge and attitude were 14.63±2.86 and 28.91±36.00, respectively. There was a significant negative correlation between the subjects' knowledge and attitude (r=-.11, p=.002). Conclusion: It is necessary to have a reporting system that can accurately monitor the occurrence of extravasation for patient safety management. In addition, it is necessary to develop a protocol that can be applied to clinical practice and a nurse education program.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.255-264
• /
• 2020

The purpose of this study was to compare and analyze the differences before and after certification for internal members of nursing hospitals and Western hospitals that received the certification system of medical institutions after conducting a survey on 297 members of nursing hospitals and Western hospitals, SPSS 26.0 was used, and to understand the effect of improvement of member satisfaction, job stress, and medical service on the hospital operation effect. As for the hospital operation effect of a nursing hospital, it was revealed that the higher the satisfaction of the members and the improvement of the medical service, the higher the effect of the hospital operation. In the case of Western hospitals, the higher the satisfaction of the members and the improvement of the medical service, the lower the job stress, the more the hospital operation effect can be seen to increase. As the basic value system of the medical institution certification system is the improvement of patient safety and quality of care, it is believed that the effect of the certification system was higher than that of Western hospitals due to mandatory certification in nursing hospitals.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.390-397
• /
• 2022

The use of microwaves as the energy source for synthesis and sintering of ceramics offers substantial advantages compared to conventional gas-fired and electric resistance furnaces. Benefits include much shorter processing times and reaching the sintering temperature more quickly, resulting in superior final product quality. Most oxide ceramics poorly interact with microwave irradiation at low temperatures; thus, a more complex setup including a susceptor is needed, which makes the whole process very complicated. This investigation pursued a new approach, which enabled us to use microwave irradiation directly in poorly coupled oxides. In many solid-state electrochemical devices, the support is either metal or can be reduced to metal. Metal powders in the support can act as an internal susceptor and heat the entire cell. Then sufficient interaction of microwave irradiation and ceramic material can occur as the sample temperature increases. This microwave heating and exothermic reaction of oxidation of the support can sinter the ceramic very efficiently without any external susceptor. In this study, yttria stabilized zirconia (YSZ) and a Ni-YSZ cermet support were used as an example. The cermet was used as the support, and a YSZ electrolyte was coated and sintered directly using microwave irradiation without the use of any susceptor. The results were compared to a similar cell prepared using a conventional electric furnace. The leakage test and full cell power measurement results revealed a fully leak-free electrolyte. Scanning electron microscopy and density measurements show that microwave sintered samples have lower open porosity in the electrode support than conventional heat treatment. This technique offers an efficient way to directly use microwave irradiation to sinter thin film ceramics without a susceptor.

• The Journal of Korean Medicine
• /
• v.42 no.3
• /
• pp.99-118
• /
• 2021

Objectives: The aim of this study is to review and analyze the trends in prospective clinical research (PCR), project, clinical study protocol of Korean medicine (KM) for dementia. Methods: We searched PCRs of KM on dementia in six electronical databases, up to January 28, 2021. Moreover, the clinical research protocol and projects of KM for dementia were searched. Results: Total eight PCRs, nine projects, and three clinical study protocols were included. In the PCRs, there were one randomized controlled trial, five before and after study, and two comparative group before-after studies. Four of them used herbal medicine, two used acupuncture, one study used both herbal medicine and acupuncture, and the other one used moxibustion. Jowiseungchung-tang was the most frequently used herbal medicine. BL62, KI6 were used in electro-acupuncture, auricular-Shenmen in auricular acupuncture, and GV20 in moxibustion. The most frequent outcome was Korean-Dementia Rating Scale (K-DRS). One reported significant increase in K-DRS score, one reported 60% improvement, and the other studies mostly reported no significant difference. In the projects including 20 clinical studies of dementia, herbal medicine, integrative medicine and acupuncture were mainly used. In the protocols, herbal medicine, complex KM intervention, and integrative medicine were used. Conclusions: Currently, the number of PCRs of KM for dementia is very scarce. Therefore, the researcher's interest in this field and national research support should be made more, and the quality of clinical research in the future can be further improved by supplementing the limitations of previously published clinical research.

• Journal of Dairy Science and Biotechnology
• /
• v.40 no.1
• /
• pp.1-14
• /
• 2022

The safety and storage periods of various foods, including dairy products, can be affected by a variety of internal and external factors. Therefore, all foods have a risk of deterioration after storage for a certain period of time for many different reasons. Among dairy products, cheese is enriched in necessary nutrients; however, it can also easily undergo physical, chemical, and biochemical changes under various conditions. Therefore, the storage period of cheese is an important issue. If various factors that can affect the safety and storage period of cheese can be controlled, the safety of cheese can be preserved and its storage period extended. This review of the literature published on the issue summarizes various state-of-the-art technologies currently used to extend the storage period of cheese without affecting its quality. This basic data will inform future research concerning the storage period of various cheeses.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.181-186
• /
• 2022

The world's electric automobile sector has shifted beyond technological environmental changes to a stage that has an impact on the market environment. And automakers are shifting from the existing strategy of "technological advantage → brand enhancement → sales expansion of existing internal combustion engine vehicles" to the expansion of the electric automobile market itself, which is to enhance market competitiveness. In addition, competition in the electric automotive parts market is expected to intensify due to the expansion of the business areas of existing parts makers and the entry of new companies, and development cooperation is expected to actively proceed to improve the efficiency of major eco-friendly parts. Along with this prospect, electric vehicles are expected to change the overall structure of the automobile industry, the overall growth of the electric vehicle value chain such as batteries, power trains (motors, power management and control systems), electric vehicle production, and charging infrastructure Is expected. Therefore, in this thesis, in order to cultivate a variety of high-quality human resources that companies want to keep pace with the changing automobile industry, we study a professional manpower training program that leads the growth engine of the electric automobile industry.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.626-643
• /
• 2023

As mobile forensics has emerged as an essential technique, the demand for technology development, education and training is increasing, wherein images are used. Academic societies in South Korea and national institutions in the US and the UK are leading the Mobile Forensic Image development. However, compared with disks, images developed in a mobile environment are few cases and have less active research, causing a waste of time, money, and manpower. Mobile Forensic Images are also difficult to trust owing to insufficient verification processes. Additionally, in South Korea, there are legal issues involving the Telecommunications Business Act and the Act on the Protection and Use of Location Information. Therefore, in this study, we requested a review of a standard model for the development of Mobile Forensic Image from experts and designed an 11-step development model. The steps of the model are as follows: a. setting of design directions, b. scenario design, c. selection of analysis techniques, d. review of legal issues, e. creation of virtual information, f. configuring system settings, g. performing imaging as per scenarios, h. Developing a checklist, i. internal verification, j. external verification, and k. confirmation of validity. Finally, we identified the differences between the mobile and disk environments and discussed the institutional efforts of South Korea. This study will also provide a guideline for the development of professional quality verification and proficiency tests as well as technology and talent-nurturing tools. We propose a method that can be used as a guide to secure pan-national trust in forensic examiners and tools. We expect this study to strengthen the mobile forensics capabilities of forensic examiners and researchers. This research will be used for the verification and evaluation of individuals and institutions, contributing to national security, eventually.

• Korean Journal of Ecology and Environment
• /
• v.55 no.3
• /
• pp.244-250
• /
• 2022

The changes in COD, TOC, T-P, and T-N concentrations were investigated for 2 years in the constructed wetland of Sookcheon, which was installed to improve the water quality of Daecheong reservoir in South Korea. In order to evaluate the pollution level of sediments in the wetland, settling velocity of particulate material (4 times) and sedimet material contents (6 times) were measured. COD and TOC concentrations increased slightly as they passed through wetlands, and T-N and T-P concentration tended to decrease. The material content (COD, T-P, T-N) of aquatic plants was higher in floating-leaved and free-floating macrophytes than emergent macrophytes. As a result of measuring the sedimentation rate of suspended materials, most of the suspended materials introduced into constructed wetlands were sedimented at a rapid rate in the first sedimentation site. In addition, sediment pollution of T-P and T-N in constructed wetland was in severe pollution. The sediments containing a large amount of T-P and T-N were eluted by physical and chemical environmental changes, which is likely to act as internal pollution sources in wetlands.