• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.4
• /
• pp.267-271
• /
• 2018

A high directivity TIR (total internal reflection) lens in the UV-A region was designed using a silicone resin, and a UV light source module with a maximum irradiation density of $150mW/cm^2$ was fabricated. The beam angle of the TIR lens was designed to be $8.04^{\circ}$ and the maximum diameter of the TIR lens was Ø13.5. A silicone resin having a UV transmittance of 93% and a refractive index of 1.4 at a wavelength of 365 nm was used, and the lens was manufactured using an aluminum mold, from which silicone could be easily released. The module was fabricated in a metal printed circuit board of COB (chip on board) type using a $0.75{\times}0.75mm^2$ UV chip. A jig was used to adjust the focal length between lens and chip and to fix the position of the lens. The optical characteristics such as illumination distributions of the lens and module were designed using 'LightTools' optical simulation software. The heat dissipation system was designed to use a forced-air cooling method using a heat-sink and fan.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.255-260
• /
• 2001

This paper describes the design of the Register Controlled DLL(Delay-Locked Loop) that achieves fast locking and low Power consumption using a new locking algorithm. A fashion for a fast locking speed is that controls the two controller in sequence. The up/down signal due to clock skew between a internal and a external clock in phase detector, first adjusts a large phase difference in coarse controller and then adjusts a small phase difference in fine controller. A way for a low power consumption is that only operates one controller at once. Moreover the proposed DLL shows better jitter performance Because using the lock indicator circuit. The proposed DLL circuit is operated from 50MHz to 200MHz by SPICE simulation. The estimated power dissipation is 15mA at 200MHz in 3.3V operation. The locking time is within 7 cycle at all of operating frequency.

• The Journal of Internal Korean Medicine
• /
• v.11 no.1
• /
• pp.93-107
• /
• 1990

Studies on diagnosis and treatment of tumor . abscess . ulcer in intestinal carbuncle were carried out. The result of studies were summerized as follows: 1. By Nai-Gyung carbuncle-tumor arose from disharmony between nutrient and defensive because of cold, abscess arose from fever victory between cold and fever, ulcer arose from decreasing function of Bi-Kam year. By latter literature Bi-Kam year could be interpreted that spleen stomach was invaded evil influence from unattainable vital force of the earth. 2. Sites of intestinal carbuncle were large intestine, small intestine, intestinal inside or outside between large and small intestine, Intestinal carbuncle was common name of a disease about large intestinal carbuncle, small intestinal carbuncle, pelvic intestinal carbuncle, shrink leg intestinal carbuncle etc.. Pain appeared Chunchu-Hyul in large intestinal carbuncle, and Gwanweon-Hyul in small intestinal carbuncle. 3. On abdominal diagnosis tumor had indistinct pain of Gwanweon Chunchu, edema and heary feeling in low abdomen, no excessive pain by hand press and intestinal boiling sound. In abscess pain descended from right side of low abdomen to huckle, and there was rejection against press, feeling about fever,water sound with flank movement. In ulcer hand approach was difficult since excessive pain diffuse to whole abdomen, and perforating ulcer sometimes caused a serious symptom of umbilical pus. 4. On fecal and urinary diagnosis in tumor urine was yellowish red pollakiuria like gonorrhoea and occasional constipation. In abscess uncomfortable rough pain short red early urine like gonorrhoea appeared during urination, and constipation with stinging pain appeared during defecation. In ulcer red rough pyuria appeared, and stinging and pain with puruloid blood appeared during defecation. 5. On treatment in tumor Daiwhang-Tang Daisenggi-Tang Dangui-Jun by dissipation method, calming down method, interior reliance maturation method, in abscess Mokdan-San Euiiin-Tang Jeokduiin-Tang by the method of water repelling pus discharge, acute breaking, in ulcer Takridanggui-Tang Paljin-Tang Bojungikki-Tang were each used by the method of interior reliance, virulence astriction, supplement vital force and blood, supplement spleen stomach. 6. On treatment patient may have to be careful of excessive moving and suprising anxiety. Abuse of acupuncture and moxibustion made patient worse, misuse of analgesics purgative intestinal irrigation etc. could provoke difficult diagnosis and perforation. So you must treat after exact diagnosis. 7. Prognosis of ease tumor ease abscess ease ulcer and ease astriction was good. If the intestinal carbuncle were not to promote to abscess and ulcer for a long time, its prognosis was bad and it could metastasize to cancer because of dark purple with hardness. So tumor abscess ulcer in intestinal carbuncle may be significant of precancerous lesion.

• The Journal of Art Theory & Practice
• /
• no.8
• /
• pp.123-144
• /
• 2009

The history of art during the first half of the last decade was founded the discussion with highly impressive and confident. The art might establish its unique area based on self recognition at that era. The self-confidence of modern art may be possible on enlightenment, which is the firm relationship for knowledge and reality. However the faith of modernism which shows rational tendency, objective, and the existence of universal knowledge has been drastically doubted and criticized thereafter. A internal ideological system which had leaded the modern art was exhausted. Postmodernism revolved to the dramatic openness leaning against the deoedipalizational confession. According to the dissipation of the vitality of modern art postmodern art has been evolved and then various phenomena which follow the trends has been emerged. The avant-garde and resisteive attribute of modern art was diluted fast due to the influx of popular culture. As time goes it can be attracted by spectacle taste than metaphysical peculiarity. It has to inevitably justified the drift of light and quick themes, contents, and images. Such as these phenomena realistically shows fact that postmodern art had been failed to open a new chapter of consilience which intermediates beauty and usual communication to overcome the solipsism of modernism. A trial to pursuit the opened esthetics conceived more 'heroic' 'Star-Subject' than before by dismantling the modern 'Hero-Subject'. Postmodernism has been recorded as a regression of art, which is the technology of profound spirit that mitigates antagonism and confrontation and mediates mutual encountering of human being. Prevailing of postmodern freedom had been accompanied by popularity, osetentation consumption, marketing, gambling level exitement, mixtures of desires with price fluctuations. We witness 'self-confinement' and 'lasting absence of exit' phenomena in postmodernism ideology and practice. We have to deal postmodernism as an 'ideology which closes the discussion for the future' in the context of 'absence of way' at this point. We are going to investigate how postmodern ideology and practice takes part in the prospection beyond thereafter through discussion. We also pay attention to the 'absence of prospection' as a internal problem in itself nevertheless mention the three merge points such as tradition or memory, earthy thought, the self who confrontation others as the clue of prospecting thought which is allowing coming over postmodern absence.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.559-573
• /
• 2008

In this study, we newly proposed 3-D nonlinear wave driver utilizing the Navier-Stokes Eq. the numerical integration of which is carried out using SPH (Smoothed Particle Hydrodynamics), an internal wave generation with the source function of Gaussian distribution and an energy absorbing layer. For the verification of new 3-D nonlinear wave driver, we numerically simulate the sloshing problem within a parabolic water basin triggered by a Gaussian hump and uniformly inclined water surface by Thacker (1981). It turns out that the qualitative behavior of sloshing caused by relaxing the external force which makes a free surface convex or uniformly inclined is successfully simulated even though phase error is visible and an inundation height shrinks as numerical simulation more proceeds. For the more severe test, we also simulate the nonlinear shoaling and refraction over uniform beach of wedge shape. It is shown that numerically simulated waves are less refracted than the linear counterpart by Hamiltonian ray theory due to nonlinearity, energy dissipation at the bottom and side walls, energy loss induced by breaking, and the hydraulic jump occurring when breaking waves encounter a down-rush by the preceding wave.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.347-355
• /
• 2021

During the earthquake, for multi-story structure, if the first floor is soft, the deformation will concentrate on that floor causing a serious damage to the column members which might leads to the collapse of the whole structure like Piloti structure during the Pohang earthquake in Korea. According to the 2016 National Disaster Management Research Institute's "Investigation of Seismic Reinforcement and Cost Analysis of Domestic Non-seismic Buildings", the rate of seismic resistance of private reinforced concrete buildings was 38.3 %. Among them, it was reported that the seismic-resistance ratio of the two to five-story structures was less than 50 %. Accordingly, the government is trying to improve the seismic rate through support projects, but the conventional seismic reinforcement methods are still expensive, and emergency construction is difficult. Therefore, in this study, the field applicability was evaluated by improving the reinforcement method using Velcro, which was developed through the research project of the Ministry of Land, Transport and Maritime Affairs in 2014. In order to improve the performance of the Velcro reinforcement method, introducing the initial tension of Velcro using high foaming rigid urethane filling between the Velcro and concrete of the columns was applied. Additionally, an experiment was conducted to evaluate the ductility of Velcro specimen from the concrete confinement effect. As a result, the ductility of the Velcro specimen was improved compare to Normal specimen. However, the energy dissipation capacity of VELCRO2 is better than VELCRO1, yet the maximum ductility of those two specimens did not show a significant difference. Therefore, the improvement of the internal filler material is still needed to have a better maximum ductility.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.465-469
• /
• 2000

This paper describes a single-chip full-custom implementation of pipelined adaptive decision-feedback equalizer (PADFE) using a 0.25-${\mu}{\textrm}{m}$ CMOS technology for wide-band wireless digital communication systems. To enhance the throughput rate of ADFE, two pipeline stage are inserted into the critical path of the ADFE by using delayed least-mean-square (DLMS) algorithm Redundant binary (RB) arithmetic is applied to all the data processing of the PADFE including filter taps and coefficient update blocks. When compared with conventional methods based on two's complement arithmetic, the proposed approach reduces arithmetic complexity, as well as results in a very simple complex-valued filter structure, thus suitable for VLSI implementation. The design parameters including pipeline stage, filter tap, coefficient and internal bit-width and equalization performance such as bit error rate (BER) and convergence speed are analyzed by algorithm-level simulation using COSSAP. The singl-chip PADFE contains about 205,000 transistors on an area of about 1.96$\times$1.35-$\textrm{mm}^2$. Simulation results show that it can safely operate with 200-MHz clock frequency at 2.5-V supply, and its estimated power dissipation is about 890-mW.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.60-69
• /
• 2000

This paper describes a single-chip full-custom implementation of pipelined adaptive decision-feedback equalizer(PADFE) using a 0.25-${\mu}m$ CMOS technology for wide-band wireless digital communication systems. To enhance the throughput rate of ADFE, two pipeline stages are inserted into the critical path of the ADFE by using delayed least-mean-square(DLMS) algorithm. Redundant binary (RB) arithmetic is applied to all the data processing of the PADFE including filter taps and coefficient update blocks. When compared with conventional methods based on two's complement arithmetic, the proposed approach reduces arithmetic complexity, as well as results in a very simple complex-valued filter structure, thus suitable for VLSI implementation. The design parameters including pipeline stage, filter tap, coefficient and internal bit-width, and equalization performance such as bit error rate (BER) and convergence speed are analyzed by algorithm-level simulation using COSSAP. The single-chip PADFE contains about 205,000 transistors on an area of about $1.96\times1.35-mm^2$. Simulation results show that it can safely operate with 200-MHz clock frequency at 2.5-V supply, and its estimated power dissipation is about 890-mW. Test results show that the fabricated chip works functionally well.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.489-494
• /
• 2015

This research focused on minimizing the response of fixed cylindrical offshore structures to a ship impact considering the seawater fluid part. A collision between a ship and offshore structure is generally a complex problem and it is often impractical to perform rigorous finite element analyses to include all the effects and sequences during the collision. The structural behavior of a fixed cylindrical type offshore substructure with a seawater fluid part has a simpler response and small deformation due to the dissipation of impact energy. Upon applying the impact force of a ship to the cylindrical structure, the maximum acceleration, internal energy, and plastic strain are calculated for each load cases using Ls-dyna finite element software. In the maximum cases 2.0 m/s velocity, the response result for the structure was carried out to compare between having a fluid region and no fluid region. Fluid-structure interaction analysis was performed using the ALE method, which make it possible to apply a fluid region on the impact problem. The case of a fixed cylindrical type offshore structure without a seawater fluid part can be a more conservative design.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.339-345
• /
• 2014

For enhancing productivity of glulam, high frequency (HF) curing technique was researched in this study. Heat energy is generated by electromagnetic energy dissipation when HF wave is applied to a dielectric material. Because both lamina and adhesives have dielectric property, internal heat generation would be occurred when HF wave is applied to glulam. Most room temperature setting adhesives such as phenol-resorcinol-formaldehyde (PRF) resin, which is popularly used for manufacturing glulam, can be cured more quickly as temperature of adhesives increases. In this study, dielectric properties of larch wood and PRF adhesives were experimentally evaluated, and the mechanism of HF heating, which induced the fast curing of glue layer in glulam, was theoretically analyzed. Result of our experiments showed relative loss factor of PRF resin, which leads temperature increase, was higher than that of larch wood. Also, it showed density and specific heat of PRF, which are resistance factors of temperature increase, were higher than those of wood. It was expected that the heat generation in PRF resin by HF heating would occur greater than in larch wood, because the ratio of relative loss factor to density and specific heat of PRF resin was greater than that of larch wood. Through theoretical approach with the experimental results, the relative strengths of ISM band HF electric fields to achieve a target heating rate were estimated.