• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.5
• /
• pp.371-378
• /
• 2018

Internal detonation of a warhead inside a compartment of naval vessel can result in serious blast damages including plastic deformation and rupture of the structural members especially bulkhead due to the huge explosive impact pressure, fragments and high temperature flame. To secure watertight integrity and to prevent the domino-type flooding of neighbouring compartments caused by the rupture of bulkheads, it is necessary to develop the structural design technology of Blast Hardened Bulkheads(BHB) which can resist the blast impact pressure of threatening weapons to increase the survivability of naval vessels. This study dealt with the simplified structural response analysis of BHB under impact pressure of confined explosion and aimed to develop the efficient and rational design method of BHB and joint structures which can be applied at initial design stage. The present 1st report dealt with the phenomena of explosive detonation surveying the preceding experimental/theoretical research and the characteristics of time history of blast pressure including the peak value and duration time were examined. And to predict the large plastic deformation behaviors of BHB by the huge blast pressure reasonably, the plastic hinge method including the membrane effects was formulated. It was applied to the simplified structural design equations. The following report will deal with the application and adjustment process of the structural scantling equations to the actual BHB design and verification of validity of them.

• The Plant Pathology Journal
• /
• v.21 no.2
• /
• pp.87-92
• /
• 2005

The structural differences between healthy and diseasedpanicle necks caused by Pyricularia oryzae were observed using electron-microscope. In the diseased panicle neck, the infection hyphae of the rice blast pathogen grew through the sclerenchymatous fiber tissue and reached to the central internal lacuna. Since the pathogen grew through the sclerenchymatous fiber tissues, the vascular bundle composed with xylem and phloem had been destroyed and finally the nutrients from the leaf and stem were not able to be transported into the grains. Infection of panicle base by the blast pathogen until 20 days after heading caused more than 50% of yield loss in both Jinmibyeo and Chucheongbyeo. There was a positive correlation between incidence of the panicle blast and rice yield losses. The regression equations between incidence of the panicle blast and yield losses were y= -3.61+496.7 ($R^2$=0.70) in Jinmibyeoand y=-3.93+520.2 ($R^2$=0.82) in Juanbyeo. The panicleblast caused deterioration of grain quality. Healthy grain rate was reduced by increase of panicle blast infection.

• The Plant Pathology Journal
• /
• v.16 no.5
• /
• pp.257-263
• /
• 2000

Infection with rice blast fungus (Magnaporthe grisea) significantly reduced foliar net photosynthesis (A) of rice cultivars: Ilpoom, Hwasung, and Choochung in greenhouse experiments. By measuring the amount of diseased leaf area with a computer image analysis system, the relation between disease severity (DS) and net photosynthetic rate was curvilinearly correlated (r=0.679). Diseased leaves with 35% blast symptom can be predicted to have a 50% reduction of photosynthesis. The disease severity was linearly correlated (r=0.478) with total chlorophyll (chlorophyll a and chlorophyll b) per unit leaf area(TC). Light use efficiency was reduced by the fungal infection according to the light response curves. However, dark respiration (Rd) did not change after the fungal infection (p=0.526). Since the percent of reduction in photosynthesis greatly exceeded the percent of leaf area covered by blast lesions, loss of photosynthetic tissue on an area basis could not by itself account for the reduced photosynthesis. Quantitative photosynthetic reduction can be partially explained by decreasing TC, but cannot be explained by decreasing Rd. By photosynthesis (A)-internal CO$_2$ concentration (C$_i$ curve analysis, it was suggested that the fungal infection reduced ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) activity, ribulose-1,5-bisphosphate (RuBP) regeneration, and inorganic phosphate regeneration. Thus, the reduction of photosynthesis by blast infection was associated with decreased TC and biochemical capacity, which comprises all carbon metabolism after CO$_2$ enters through the stomata.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.1
• /
• pp.25-34
• /
• 2023

This paper presents a computational fluid dynamics (CFD) analysis to investiagate the effect of expansion chamber on overpressure reduction in protective tunnels subjected to detonation of high explosives. A commercial CFD code, Viper::Blast, was used to model the blast waves in a protective tunnel with a length of 160 m, width of 8.9 m and height of 7.2 m. Blast scenarios and simulation matrix were establihsed in consideration of the design parameters of expansion chamber, including the chamber lengths of 6.1 m to 12.1 m, widths of 10.7 m to 97 m, length to width ratios of 0.0 to 5.0, heights of 8.0 m and 14.9 m, and ratios of chamber to tunnel width of 1.2 to 10.9 m. A charge weight of TNT of 1000 kg was used. The mesh sizes of the numerical model of the protective tunnel were determined based on a mesh convergence study. A parametric study based on the simulation matrix was performed using the proposed CFD tunnel model and the optimized shape of expansion chamber of the considered tunnel was then proposed based on the numerical results. Design recommendations for the use of expansion chamber in protective tunnel under blast loads to reduce the internal overpressures were finally provided.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.933-940
• /
• 2010

A numerical analysis for the space frame structure under ballistic and blast loads was performed using LS-DYNA, a commercial code. The space frame structure was developed to be adapted to the ground vehicle in the future and it was designed to build with Al7039 frames and lightweight multi-layered panels for the purpose of weight reduction and shock mitigation. The analyses have done for side impacts by a cylindrical projectile and Comp. C-4 explosive representing major threats to the vehicle. The deformed shape of the panel section and stresses as well as accelerations of the frames calculated from LS-DYNA were compared to the test results to validate the analysis model. The internal energies for panels and frames from LS-DYNA were also compared to each other to discern their role in absorbing the ballistic and blast impact.

• Geomechanics and Engineering
• /
• v.23 no.3
• /
• pp.245-259
• /
• 2020

Tunnels have become an indispensable part of metro cities. Blast resistance design of tunnel has attracted the attention of researchers due to numerous implosion event. Present paper deals with the non-linear finite element analysis of rock tunnel having shear zone subjected to internal blast loading. Abaqus Explicit schemes in finite element has been used for the simulation of internal blast event. Structural discontinuity i.e., shear zone has been assumed passing the tunnel cross-section in the vertical direction and consist of Highly Weathered Granite medium surrounding the tunnel. Mohr-Coulomb constitutive material model has been considered for modelling the Highly Weathered Granite and the shear zone material. Concrete Damage Plasticity (CDP), Johnson-Cook (J-C), Jones-Wilkins-Lee (JWL) equation of state models are used for concrete, steel reinforcement and Trinitrotoluene (TNT) simulation respectively. The Coupled-Eulerian-Lagrangian (CEL) method of modelling for TNT explosive and air inside the tunnel has been adopted in this study. The CEL method incorporates the large deformations for which the traditional finite element analysis cannot be used. Shear zone orientations of 0°, 15°, 30°, 45°, 60°, 75° and 90°, with respect to the tunnel axis are considered to see their effect. It has been concluded that 60° orientation of shear zone presents the most critical situation.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.861-868
• /
• 2022

The purpose of this study is to design an effective atmospheric environment system through the design of the dust collection in the air shot room being operated in a domestic shipyard. The ventilation system in the current air shot room mostly uses a dust collecting filter to filter internal particles and releases them in the atmosphere. A conventional design was made too much. In order to prevent an error and draw an optimal design, Computational fluid dynamics (CFD) tried to be applied only to air shot room. In the advanced design technique, computer simulation was conducted to secure basic design data. In order to find the basic design of the ventilation system and the flow field in the air shot room at propeller mold workplace of a shipyard, the CFD was conducted. In the case of Model-1 as a conventional workplace, where air flows in the inlet due to the subatmospheric pressure generated by inhalation of an air blower and flows out to the outlet, a discharge flow rate was somewhat low, and there was the holdup zone in the room. In the case of Model-2 as an improved model, the ventilation system was improved in the Push-Pull type, and the holdup of the internal flow field was improved.

• The Plant Pathology Journal
• /
• v.33 no.1
• /
• pp.9-20
• /
• 2017

Incidence of leaf blast on nursery plants and pitting disease on maturing banana bunches has been recorded in banana plantations during rainy season in Eastern India during 2014 to 2015. Taxonomical identification as well as DNA sequence analysis of the internal transcribed spacer region of fungus isolated from affected tissue culture derived plantlets and fruits confirmed the pathogen to be Pyricularia angulata Hashioka "in both the cases". Koch's postulates were proved on young plantlets as well as on maturing fruits of cv. Grand Naine under simulated conditions. Evolutionary history was inferred and presented for our P. angulata strain PG9001 with GenBank accession no. KU984740. The analysis indicated that the P. angulata is phylogenitically distinct from other related species related to both Pyricularia and Magnaporthe. Detailed symptoms of blast lesions on young leaves, transition leaves, mid rib, petioles, peduncle, maturing bunches, bunch stalks and cushions were documented. Notably, the distinct small pitting spots on maturing bunches reduced the visual appeal of mature fruits. Appearance of pitting symptoms on fruits in relation with age of fruits and their distribution pattern on bunch and fingers was also documented in detail. Further, the roles of transitory leaves, weed hosts, seasonality on disease occurrence have also been documented.

• Journal of Life Science
• /
• v.26 no.11
• /
• pp.1341-1344
• /
• 2016

Dendropanax morbifera is an endemic tree species of Korea, it is restricted to the southern parts of Korea. The internal transcribed spacer (ITS) region of nuclear ribosomal DNA (nrDNA) for Dendropanax morbifera grown at Bogil-do, Korea was determined. We investigated the sequence-based phylogenetic relationships of plants related and clarified its taxonomical position. The determined sequences consisted of 689 residues. ITS1 was 222 bp long while ITS2 was 233 bp long. The 5.8S rDNA was 160 bp long. The ITS region sequences of the Dendropanax species included in this study were obtained from GenBank. Oreopanax polycephalus was used as the outgroup. A pairwise alignment was calculated using the Clustal X program. A phylogenetic tree was constructed by the neighbor-joining method using the Tree view program. Sequence similarities among species including D. morbifera Bogil-do isolate showed the range 92.6 to 99.7% in sequence-based phylogenetic analysis using total 615 base pairs of ITS1, 5.8S rDNA and ITS2. D. morbifera Bogil-do isolate exhibited the highest degree of relatedness to D. chevalieri, sharing 99.7% ITS region similarity. D. morbifera Bogil-do isolate also showed to D. trifidus, sharing 99.4% ITS region similarity.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.10
• /
• pp.207-215
• /
• 2019

The aim of the research is analyzing the simple adiabatic temperature rising properties and the heat of hydration based on different placing timing of the mass concrete depending on various replacing ratios of blast furnace slag to comparative analyze the thermal cracking index and cracking possibility. As a result from the experiment, a suggested adiabatic temperature rising equation based on various blast furnace slag replacing ratios can be provide favorable correlation with over 0.99 of $R^2$ value by applying the initial induction period. With this relationship, more accurate prediction of the amount of the hydration heat rising and heating timing, and it is known that there is an approximately $13.1^{\circ}C$ of gap between plain concrete without blast furnace slag and concrete with 80 % of replacing blast furnace slag. To control the setting time and heat rising gap, the mix designs between top and bottom concrete casts were changed 15 cases, and D, E, H, I, and L models of controlling the heat of hydration showed 41.23 to $46.88^{\circ}C$ of core temperature and 0.98 to 1.27 of thermal cracking index. Therefore the cracking possibility was 15 to 52 % of favorable results of possibly controlling both the cracking due to the internal and external retainment and concrete temperature at early age.