• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.26-33
• /
• 1994

In this paper, the performance of the trellis coded CPFSK with the coherent detection over mobile communication channels is calculated. The characteristics of channels, including phase jitter effects and fading effects, are examined and modeled. The phase jitter channel is modeled to have a nonzero mean and a gaussian distribution. The fading channel has a Rayleigh distribution in the multipath. For the optimal decoding method(MLSE), the Viterbi algorithm is used for the trellis structure of trellis coded CPFSK. The results indicate that the trellis coded CPFSK with a small moulation indes gets more sensitive, as the index gets smaller, to the phase noise under the phase jitter channel. Using the interleaving method. It gives considerable improvements in the error rate under the fading channel.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.10
• /
• pp.598-605
• /
• 2003

In this paper, we propose the method that separates PPG signal and motion artifact signal from two input signals using new independent component analysis algorithm in time domain. In order to eliminate the large level artifact efficiently, block interleaving. lowpass time filtering and innovation processing technique were applied in ICA preprocessing, and FastICA algorithm were applicable. Experiments are made with the numerical simulation and the real PPG signal including four kinds of motion artifact pattern. Our results show that ICA can effectively detect, separate and remove motion artifact in input signals. Then from the separated signals we restore the original PPG signal and propose a new method which computes SpO$_2$ using ICA mixing matrix.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.54-61
• /
• 2010

In this paper, we design the signal processing unit to effectively support the proposed algorithm for an automotive Frequency Modulation Continuous Wave(FMCW) radar. In the proposed method, we can obtain the distance and velocity with improved error depending on each range(long, middle, and short) of the target. Since a high computational capacity is required to obtain more accurate distance and velocity for target in near range, the proposed signal processing unit employs the time de-interleaving and the frequency interpolation method to overcome the limitation. Moreover, for real-time signal processing, the parallel architecture is used to extract simultaneously the distance and velocity in each range.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.36-44
• /
• 2014

The conventional central photo voltaic inverters have several problems. First, shadow problem in each solar panel, and high DC voltage problem from each panel because of concentration to one central inverter. Therefore, module integrated inverter is proposed to solve these problems. The inverter should be small and cost effective. The cost and size in the inverter depend on the inductor. So the switching frequency should be increased to reduce the inductor and total size, but there is a problem in efficiency because of the losses in turn-on and turn-off. In the paper, the critical conduction mode(CRM) switching method is adopted to reduce the switching loss and interleaving method is proposed to increase the efficiency in Flyback converter. Finally, the validity of the proposed scheme is investigated with simulated and experimental results for a prototype system rated at 200W.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.6 no.3
• /
• pp.3-10
• /
• 1996

We present a method to recover consecutive cell losses using forward error correction(FEC) in ATM networks. Our method recovers up to 18 consecutive cell losses. Also, we present the performance estimation of the FEC technique using the interleaving in ATM networks. Performance estimation shows an outstanding reduction in cell loss rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.814-827
• /
• 2004

The compressed mode is used to perform inter-frequency and inter-system handover in WCDMA. The instantaneous transmit power is increased in the compressed frame in order to keep the QoS(Quality of Service) unaffected by the reduced processing gain. Furthermore, since the inner loop power control is not active during the transmission gap and the effect of interleaving is decreased, a higher Eb/No target is required, which directly affects the system performance. Due to the impact on performance, the compressed mode should be activated by the RNC(Radio Network Controller) only when there is real need to execute an inter-frequency or inter-system handover. However, 3GPP does not define the method that decides the compressed mode activation. In order to reduce performance degradation, there is need the decision method. In this paper, we consider a combined cell structure in which some neighbor cells have a frequency the same as serving cell and the others have a different frequency or system. Under consideration, we analyze the effect of the compressed mode on the WCDMA forward link performance. In order to avoid performance degradation, we propose an UE(User Equipment) measurement method that can restrict the activation area of the compressed mode of UE that does not need it and evaluate its performance by simulations. Analytical results show that the use of the compressed mode affects the performance degradation. And simulation results show that proposed method leads to better performance.

• The KIPS Transactions:PartB
• /
• v.10B no.2
• /
• pp.143-150
• /
• 2003

Error concealment plays an important role in combating transmission errors. Methods of error concealment which produce better quality are generally of higher complexity, thus making some of the more sophisticated algorithms is not suitable for real-time applications. In this paper, we develop temporal and spatial error resilient video encoding and data hiding approach to facilitate the error concealment at the decoder. Block interleaving scheme is introduced to isolate erroneous blocks caused by packet losses for spatial area of error resilience. For temporal area of error resilience, data hiding is applied to the transmission of parity bits to protect motion vectors. To do error concealment quickly, a set of edge features extracted from a block is embedded imperceptibly using data hiding into the host media and transmitted to decoder. If some part of the media data is damaged during transmission, the embedded features are used for concealment of lost data at decoder. This method decreases a complexity of error concealment by reducing the estimation process of lost data from neighbor blocks. The proposed data hiding method of parity bits and block features is not influence much to the complexity of standard encoder. Experimental results show that proposed method conceals properly and effectively burst errors occurred on transmission channel like Internet.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.330-331
• /
• 2011

The interleaving method is usually used to reduce the ripple of output current of filter inductor in parallel operation of PWM DC/DC converter. Although the current ripple of filter inductor decreases, each current ripple of filter inductor is not decreased. In this study, the operation of interleaved buck converter with coupled inductor is analyzed in each operation mode. It is verified through experiment. The possibility of application to grid connected inverter with parallel operation is identified.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.869-872
• /
• 2001

This paper proposes on the implementation of efficient image transmission system by generation and protection of watermark signals. For this, the image structure understanding is performed for improving the image quality and the generation of watermark signals. Then, the histogram is constructed and the watermark signals are selected from this. At this stage, by embedding of the coefficients of curve fittness into the lower 4 its of the image data pixels, image quality degradation due to the embedding of watermark signals are prevented. Finally, turbo encoding is performed to solve the problem of watermark signal losses that may occur on channels when transmitting. Especially, a new interleaving method called semi-random interleaver is proposed.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.113-113
• /
• 2001

Purpose： In the gradient echo EPI the conventional T2＊-weighted image is poor in signal as well distorted by the field inhomogeneity. By acquiring a proton density image in addition to th T2＊-weighted image at the same scan, the fMRI processing can be improved. Method： The central region of the k space is acquired twice at different time points after th RF pulse while acquiring the other regions onc as described in Fig. 1. In Fig. 1 the segment numbers are chronological. Then, we can get two images of different contrast by interleaving th central region in the k space as done in the dua contrast FSE.