• 제목/요약/키워드: interior materials

검색결과 1,279건 처리시간 0.032초

세계문화유산 조선 왕릉의 능제조정에 관한 연구 (A Study on Intervention of the Tomb's System in Joseon Royal Tombs, the World Cultural Heritage of UNESCO)

  • 이창환;김규연;김두규;최종희
    • 한국전통조경학회지
    • /
    • 제32권4호
    • /
    • pp.94-104
    • /
    • 2014
  • 본 고에서는 조선왕릉의 탁월한 보편적 가치, 진정성, 완전성을 담보하면서, 체계적인 보존 관리 활용 시 필요한 지식 정보 및 향후 추진해야 할 주요 이슈 등을 고찰 한 바 결론은 다음과 같다. 첫째, 능제복원의 경우 역사적 사실과 이에 근거한 실측, 분석, 평가 등을 통해 왕릉 공간의 완전성과 진정성을 높일 수 있도록 계획을 수립하여야 하며, 국제헌장 및 선언문, 국내헌장 및 역사적 건축물과 유적의 수리와 복원에 관한 일반원칙에 기초한 조정이 이루어져야 한다. 둘째, 안전방재의 경우 문화재 보호법과 소방법 등 관련법령의 정비를 전제로, 화재전문가가 참여하여 각 왕릉의 실태 조사 후 화재발생 위험지역 구분 및 GIS 자료 구축 그리고 지형과 임상 등을 고려한 화재 발생 위험지도(Risk Map)의 작성을 포함하는 방재시스템이 마련되어야 한다. 셋째, 활용의 경우, 왕릉이야기와 제례문화를 중심으로 하는 교육적 활용, 왕릉 소재 지역을 중심으로 하는 관광적 활용, 과학기술과 정보통신 기술을 활용한 산업적 활용 방안을 마련하여야 한다.

ACQ 방부처리목재로부터 용탈된 구리에 의한 토양오염 평가 (Evaluation of Soil Contamination by Copper Depleted from ACQ-Treated Wood)

  • 나종범
    • Journal of the Korean Wood Science and Technology
    • /
    • 제43권4호
    • /
    • pp.504-510
    • /
    • 2015
  • 본 연구는 국내에서 사용되는 ACQ 방부처리목재로부터 토양으로 용탈된 구리에 의해 발생되는 토양오염 정도를 평가하기 위하여 수행되었다. 야외시험장에서 3년 동안 노출된 방부처리목재 주변의 토양을 분석하여 구리의 용탈량 및 용탈된 구리의 이동범위를 산정하였으며, 전남 및 경남에서 ACQ 방부처리목재가 사용된 데크 주변의 토양을 분석하여 구리에 의한 토양오염 정도를 평가하였다. 야외노출시험은 방부처리목재의 횡단면에서 용탈되는 구리의 양이 목재의 측면에서 용탈되는 구리의 양보다 1.5배 이상 높다는 것과 토양 내에서의 구리의 이동이 매우 제한적인 것을 보여주었다. 근린공원에 설치된 데크 기둥 주변의 토양 분석은 방부처리목재로부터 10 cm 이내의 토양 내 구리 함유량이 대부분 2지역 토양오염우려기준인 500 mg/kg을 초과하지 않았다는 것을 보여주었다. 야외노출시험의 경우 깊이 10 cm 이내의 토양에서 구리의 분포범위가 사용 중인 데크 기둥 주변의 토양에서보다 훨씬 넓은 것으로 나타났는데 이는 야외노출시험에 사용된 방부처리목재의 약제보유량이 데크 기둥의 경우보다 두 배 이상 높은 것에서 기인한다고 판단된다.

목재 단판-대나무 제퍼 복합보드 제조: II. 복합보드의 성능에 미치는 제조조건의 영향 (Manufacture of Wood Veneer-Bamboo Zephyr Composite Board: II. Effect of Manufacturing Conditions on Properties of Composite Board)

  • 노정관
    • Journal of the Korean Wood Science and Technology
    • /
    • 제35권6호
    • /
    • pp.108-117
    • /
    • 2007
  • 생장 기간이 매우 빠르고 섬유방향의 강도적 성질이 우수한 대나무를 합판의 원료로 이용하기 위하여 케루잉단판-솜대 zephyr 복합 패널(WBCB)의 제조 조건(수지접착제의 종류, 도포량, 도포방법)이 패널의 성능에 미치는 영향을 검토하였다. 수지의 종류에 따른 5-ply WBCB의 성능은 폴리메릭 이소시아네이트수지(PMDI)가 가장 좋은 결과를 나타내었으며, 이어 페놀수지(PF), 페놀 멜라민수지, 요소 멜라민수지 및 요소수지의 순이었다. 사용한 수지 중 강도적 측면과 작업성을 고려할 때 PF 수지에 의한 복합 패널 제조가 가장 적절한 것으로 생각된다. PF수지를 사용하여 제조한 12 mm 두께의 5-ply WBCB의 경우, 수지의 도포량이 증가하면 패널의 성능도 향상되는 경향이었다. 또한 박리강도 측정 후의 파괴양상은 도포량이 증가함에 따라 대나무 외층-대나무 내층 경계층의 파괴가 증가한 데 반하여 대나무 제퍼 내부층의 파괴는 상대적으로 감소하였다. 따라서 WBCB 제조시 수지가 다소 zephyr 내부까지 침투할 정도의 수지 도포량이 적절한 것으로 생각되며, 표면 단판의 오염성과 경제성 등을 고려할 때 $320g/m^2$이 가장 적합한 것으로 판단된다. 동일한 PF수지 도포량에서 수지의 도포방법을 달리하여 제조한 5-ply 복합 패널의 성능은 양면과 편면 스프레이 도포 간과 스프레이와 롤러에 의한 도포방법 간에 현저한 차이가 나타나지 않아 주어진 환경에서 작업성이 좋은 도포방법을 채택하면 될 것으로 생각된다.

IoT platform 기반 실내 대기 위험 물질 감지 모바일 시스템 설계 및 구현 (Design and Implementation of Indoor Air Hazardous Substance Detection Mobile System based on IoT Platform)

  • 양오석;김영욱;이홍로
    • 한국산업정보학회논문지
    • /
    • 제24권6호
    • /
    • pp.43-53
    • /
    • 2019
  • 최근 몇 년간 실내 환경에서 발생하는 대기 위험 물질에 관한 피해사례가 많이 있었으며, 이에 대해 빠른 대처를 하지 못하여 큰 피해가 발생하곤 했다. 이에 관해 본 시스템은 대기 위험 물질 농도 안전 수치 초과시 사용자의 Mobile에 Push Message로 전송하는 시스템을 구축하고자 한다. 본 시스템은 아두이노(Arduino), 라즈베리 파이(Raspberry PI)와 같은 IoT System으로 데이터를 추출하고 Cloud Computing System에 구현된 MongoDB, MySQL을 통하여 Database를 구축하였다. 해당 Database는 NodeJS를 이용한 Application Server를 통해 데이터를 가져오며, Application에 전송하여 시각화하였다. 또한, IoT System에서 위험 상황에 관한 신호를 받으면 Google FCM 라이브러리를 이용하여 Push Message를 보낸다. Mobile Application은 Android Web View를 이용하여 개발하며, Web View에 들어갈 Page는 HTML5 (HTML, Javascript CSS)를 이용하여 개발한다. 본 시스템의 Application을 통하여 사용자가 실내 대기 위험 물질을 실시간 모니터링하며, 위험 상황 시 사용자의 Mobile에 실내/외 검출 위치와 농도에 대한 실시간 정보를 Push Message로 전송하여 사용자의 빠른 대처에 도움이 될 것이라 기대할 수 있다.

Fabrication and Catalysis of $SiO_2$-Coated Ag@Au Nanoboxes

  • 이재원;장두전
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.588-588
    • /
    • 2013
  • Nanoscale noble-metals have attracted enormous attention from researchers in various fields of study because of their unusual optical properties as well as novel chemical properties. They have possible uses in diverse applications such as devices, transistors, optoelectronics, information storages, and energy converters. It is well-known that nanoparticles of noble-metals such as silver and gold show strong absorption bands in the visible region due to their surface-plasmon oscillation modes of conductive electrons. Silver nanocubes stand out from various types of Silver nanostructures (e.g., spheres, rods, bars, belts, and wires) due to their superior performance in a range of applications involvinglocalized surface plasmon resonance, surface-enhanced Raman scattering, and biosensing. In addition, extensive efforts have been devoted to the investigation of Gold-based nanocomposites to achieve high catalytic performances and utilization efficiencies. Furthermore, as the catalytic reactivity of Silver nanostructures depends highly on their morphology, hollow Gold nanoparticles having void interiors may offer additional catalytic advantages due to their increased surface areas. Especially, hollow nanospheres possess structurally tunable features such as shell thickness, interior cavity size, and chemical composition, leading to relatively high surface areas, low densities, and reduced costs compared with their solid counterparts. Thus, hollow-structured noblemetal nanoparticles can be applied to nanometer-sized chemical reactors, efficient catalysts, energy-storage media, and small containers to encapsulate multi-functional active materials. Silver nanocubes dispersed in water have been transformed into Ag@Au nanoboxes, which show highly enhanced catalytic properties, by adding $HAuCl_4$. By using this concept, $SiO_2$-coated Ag@Au nanoboxes have been synthesized via galvanic replacement of $SiO_2$-coated Ag nanocubes. They have lower catalytic ability but more stability than Ag@Au nanoboxes do. Thus, they could be recycled. $SiO_2$-coated Ag@Au nanoboxes have been found to catalyze the degradation of 4-nitrophenol efficiently in the presence of $NaBH_4$. By changing the amount of the added noble metal salt to control the molar ratio Au to Ag, we could tune the catalytic properties of the nanostructures in the reduction of the dyes. The catalytic ability of $SiO_2$-coated Ag@Au nanoboxes has been found to be much more efficient than $SiO_2$-coated Ag nanocubes. Catalytic performances were affected noteworthily by the metals, sizes, and shapes of noble-metal nanostructures.

  • PDF

폐유리 및 폐자기를 활용한 무시멘트계 인조석재의 특성 (Properties of Non-cement Artificial Stone Utilizing the Waste Porcelain and Waste Glass)

  • 김태현;이승호;이상수;송하영
    • 한국건설순환자원학회논문집
    • /
    • 제4권2호
    • /
    • pp.136-142
    • /
    • 2016
  • 전 세계적으로 급격한 산업화 및 현대화가 진행됨에 따라 환경오염 또한 급격히 진행되어가고 있다. 그리고 천연골재의 무분별한 채취로 환경오염 및 분진발생 등은 심각한 문제가 되고 있다. 이에 본 연구는 시멘트 생산 시 $CO_2$ 배출량을 줄이고자 시멘트 대체재로서 산업부산물인 고로슬래그와 유동층 연소 플라이애시를 사용하고자 하였으며, 천연골재의 무분별한 채취 문제를 해결하고자 골재로서 폐자기 및 폐유리를 활용하는 인조석재에 적용하는 산업부산물 및 폐자원을 활용한 내 외장재 인조석재의 특성에 대한 기초자료를 제시하고자 하였다. 그 결과, 고로슬래그를 주 결합재로 하여 유동층 연소 플라이애시를 40% 첨가하였을 때 가장 강도가 높았으며 또한, 선행실험을 토대로 폐자기 및 폐유리의 혼입율에 따른 실험을 진행 한 결과, 폐자기 및 폐유리의 적정 혼입율은 출석률이 45% 이상 보이는 혼입율 60, 70(%)의 혼입율이 가장 적정 혼입율이라고 판단된다.

가열온도별 습식방식 폐슬러지를 활용한 모르타르의 특성에 관한 연구 (A Study on the Properties of Mortar using Wet-type Waste Sludge according to Heating Temperature)

  • 강석표;조구영;이준;김창오
    • 한국건설순환자원학회논문집
    • /
    • 제6권1호
    • /
    • pp.111-119
    • /
    • 2011
  • 근래 도시 재개발사업 및 사회기반 시설의 확충 등으로 건설현장에서는 막대한 양의 건설폐기물이 발생량은 매년 증가되는 추세에 있다. 이와 같은 건설폐기물의 처리는 국가, 사회적으로 이슈로 부각되고 있으며, 이중 폐콘크리트의 중간처리 과정에서 발생되는 폐슬러지는 현재까지 유효활용되지 못하고 대부분 폐기 또는 매립되고 있는 실정이다. 따라서 본 연구에서는 건설폐기물 중간처리시설 중 습식방식에 의한 순환골재 생산시 필연적으로 부산되는 폐슬러지를 시멘트 복합체용 사용재료(바인더, 충진재 등)로 활용하기 위한 방안을 모색하기 위하여 순환미분말의 가열온도, 혼입조건, 적용용도별에 따른 모르타르의 물리, 역학적 특성을 검토하였다. 연구결과 모든 가열온도 조건에서 순환미분말의 주성분은 $SiO_2$와 CaO인 것으로 나타났으며, 여기에서 유의할 점은 순환미분말의 CaO 함량은 종래 일반적으로 활용되는 보통 포틀랜드 시멘트에 비하여 작은 함량을 나타냈다. 그리고 건조 및 가열온도 조건별에 따른 모르타르의 유동특성은 가열온도가 증가함에 따라 감소되는 결과를 나타냈고 압축강도 및 기공특성의 경우는 $600^{\circ}C$에서 가장 우수한 특성을 나타냈다. 따라서 건설폐기물 중간처리시설에서 발생되는 순환미분말의 재수화성 부여를 위한 유효 온도조건은 $600^{\circ}C$인 것으로 확인되었다.

  • PDF

구강외과 수술용 스텐트 기반 영상유도 수술 시스템의 개발 (Development and application of stent-based image guided navigation system for oral and maxillofacial surgery)

  • 이우진;김대승;이원진;이삼선;최순철;허민석;허경회;김명진;이지호
    • Imaging Science in Dentistry
    • /
    • 제39권3호
    • /
    • pp.149-156
    • /
    • 2009
  • Purpose : The purpose of this study was to develop a stent-based image guided surgery system and to apply it to oral and maxillofacial surgeries for anatomically complex sites. Materials and Methods : We devised a patient-specific stent for patient-to-image registration and navigation. Three-dimensional positions of the reference probe and the tool probe were tracked by an optical camera system and the relative position of the handpiece drill tip to the reference probe was monitored continuously on the monitor of a PC. Using 8 landmarks for measuring accuracy, the spatial discrepancy between CT image coordinate and physical coordinate was calculated for testing the normality. Results : The accuracy over 8 anatomical landmarks showed an overall mean of $0.56{\pm}0.16\;mm$. The developed system was applied to a surgery for a vertical alveolar bone augmentation in right mandibular posterior area and possible interior alveolar nerve injury case of an impacted third molar. The developed system provided continuous monitoring of invisible anatomical structures during operation and 3D information for operation sites. The clinical challenge showed sufficient accuracy and availability of anatomically complex operation sites. Conclusion : The developed system showed sufficient accuracy and availability in oral and maxillofacial surgeries for anatomically complex sites.

  • PDF

고등학교 가정과 교육을 위한 교과과정 영역별 필요도 (A study on the Need for Curriculum Contents in each Sub-area of High School Home Economics Education)

  • 이금남;김행자;안영희;이남기
    • 한국가정과교육학회지
    • /
    • 제8권1호
    • /
    • pp.1-10
    • /
    • 1996
  • This study aims at finding a new home economics education which will include male and female students as its teaching objects, and then providing home economics teachers with useful materials. For this purpose I examined analized male and female the upper secondary school students’and parents’recognition and demand to the home economics education The conclusion of this study is summarized as follows: 1. There was significant difference between male students(73.7%) and female students(89.8%) in the necessity for studying Home Economics(P<.001). In the necessity of Home Economics education, male students emphasized the spiritual part but female students emphasized the functional part. In part of parents, there was no significant difference between fathers(95.5%) and mothers(96.4%). 2. The necessity of each part in the contents of Home Economics 1) In the part of family, there was significant difference between male and female students in the true nature of family, the role and responsibility of family, and the laws relating to family(P<.001). There was significant difference between mothers and fathers in the true nature of family and the role and responsibility of family. Fathers and male students emphasized the true nature of family and the role and responsibility of family more than mothers and female students did. 2) In the Home management and economy parts, there was significant difference between male and female students in the significance of home management(P<.001), the relation of family to society(P<.001), and fluctuating measures for home economy. There was significant difference between fathers and mothers in the relation of family to society(P<.05). Fathers and male students emphasized the relation of family to society more than mothers and female students did. Mothers, male and female students emphasized the importance of the protection of consumers. 3) In the clothes part, male students emphasized the role of clothes, the disign and making of clothes(P<.001), the present situation of the resources of clothing and the distribution of clothes (P<.05) more than female students did. 4) In the part of food, there was significant difference between male and female students in the kinds and function of nutritive elements(P<.05). Parents and students emphasized the importance of selecting good food. 5) In the part of housing, male students emphasized home planning, and arrangements and facilities of house more than female students did. Female students emphasized the interior of the house(P<.05). Fathers emphasized the planning of a residential space and arrangements and facilities of a house(P<.05) more than mothers did. 6) In the parts of human development and upbringing, and upbringing, male students emphasized the significance of being parents, family planning and the population problem(P<.001), pregnancy and delivery(P<.01), and the chracteristic of juvenile development(P<.05) more than female students did. Parents and students emphasized the importance of prevention and countermeasures for diseases and the significance of being parents.

  • PDF

단독주택에 대한 울산시 거주자의 주의식 연구 (A Study of Potential Buyers' Consciousness of Single-Family Housing in Ulsan)

  • 김지숙;양세화
    • 가정과삶의질연구
    • /
    • 제28권6호
    • /
    • pp.35-46
    • /
    • 2010
  • The purpose of the study was to identify the potential buyers' consciousness of single-family housing to provide useful data to help future single-family housing supplies in Ulsan. The study selected residents in Ulsan, who were over twenty and had an interest in living in a single-family housing. A survey was conducted from September 11, 2008 to September 25, 2008. The sample consisted of 364 persons who are currently live in Ulsan metropolitan area. The results are as following. About two thirds of the sample had the desire to live in a single-family housing. Moving into a single-family housing had financial preparation as the greatest issue. When moving into a single-family housing, the convenience of the residential district was the greatest consideration, whether or not it is a green environment, pollution level, etc. The potential buyers valued environment-friendly features and also had a very strong desire to own their own house. Many of them wanted to design and build their own single-family housing within a budget of 100-200 million KRW. In terms of the location, there was a higher preference for the riverside or lakeside rural areas outside the city. In terms of size, the preference was less than $330m^2$, which includes $99-132m^2$ for residential. When considering a single-family housing the direction was the most important feature, along with eco-friendly and safer materials and equipments. When building the single-family housing the potential buyers considered the community spaces first with a preference for having three bedrooms and two bathrooms. For the exterior, they wanted a unique shape of roof and there were high preferences for brown and beige colors. In terms of housing complexes, the potential buyers preferred individual unit types over complexes. If they preferred housing complexes, they wanted the cluster form complex with about 10-30 units. The complex also required a park-like setting with a guard system, which shows that convenience and safety were the most important features. In terms of complex management, they considered environmental management as the most important feature. The potential buyers were willing to pay belw 200,000 KRW, which showed their desire to minimize financial burdens.