• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.413-420
• /
• 2006

HMIPv6 is designed to reduce the signaling load to external network and improve handover speed of MN by including Mobility Anchor Point(MAP) in local handover. However in this case of macro handover, it's just used pervious MIPv6 handover algorithm. So, it occurs packet loss and transmission delay problem. In this paper, we propose the mechanism applying the HMIPv6 for Fast Handover to choose suitable to the condition buffering handover. The condition for the selection is result distance measurement between MN and CN, between MN and NAR. Furthermore, using F-SNOOP protocol, it is possible to improve wireless network performance. Wireless network has high Bit Error Rate(BER) characteristic because of path loss, fading, noise and interference. TCP regards such errors as congestion and starts congestion control. This congestion control makes packet transmission rate low. However, F-SNOOP improves TCP performance based on SNOOP and Freeze TCP that use Zero Window Advertisement(ZWA) message when handoff occurs in wireless network.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.581-588
• /
• 2002

In this paper, we newly propose the optical CDMA routing scheme for the radio access network. At the radio base station (RBS), the received radio signals are multiplied by the PN codes and converted to the CDMA radio signals. In the next optical CDMAS are performed and multiplxed by using the PN codes which are the addresses of the routing mobile switching center (MSC). At the MSC, the CDMA radio signals are routined to another MSC by the CDM receiver at the routing node. In the case MSC is equal to the desired MSC, the radio signal is correlated by the two-layerd spectrum despreading at a time. Finally we theoretically analyze the signal-to-interference and noise power ratio of regenerated signal and the routing error probability and show the availability of proposed scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.9
• /
• pp.4334-4356
• /
• 2017

In orthogonal frequency-division multiplexing (OFDM) systems, phase noise introduced by the local oscillators can cause bit error rate (BER) performance degradation. To solve the phase noise problem, a novel orthogonal-polarization-based phase noise self-cancellation (OP-PNSC) scheme is proposed. First, the efficiency of canceling the phase noise of the OP-PNSC scheme in the AWGN channel is investigated. Then, the OP-PNSC scheme in the polarization-dependent loss (PDL) channel is investigated due to power imbalance caused by PDL, and a PDL pre-compensated OP-PNSC (PPC -OP-PNSC) scheme is proposed to mitigate the power imbalance caused by PDL. In addition, the performance of the PPC-OP-PNSC scheme is investigated, where the signal-to-interference-plus-noise ratio (SINR) and spectral efficiency (SE) performances are analyzed. Finally, a comparison between the OP-PNSC and polarization diversity scheme is discussed. The numerical results show that the BER and SINR performances of the OP-PNSC scheme outperform the case with the phase noise compensation and phase noise self-cancellation scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1911-1932
• /
• 2013

Orthogonal frequency-division multiplexing (OFDM) has become a popular modulation scheme for wireless protocols because of its spectral efficiency and robustness against multipath interference. Although the components of various OFDM protocols are functionally similar, they remain distinct because of the characteristics of the environment. Recently, graphics processing units (GPUs) have been used to accelerate the signal processing of the physical layer (PHY) because of their great computational power, high development efficiency, and flexibility. In this paper, we describe the implementation of parameterized baseband modules using GPUs for two different OFDM protocols, namely, 802.11a and 802.16. First, we introduce various modules in the modulator/demodulator parts of the transmitter and receiver and analyze the computational complexity of each module. We then describe the integration of the GPU-based baseband modules of the two protocols using the parameterized method. GPU-based implementations are addressed to explain how to accelerate the baseband processing to archive real-time throughput. Finally, the performance results of each signal processing module are evaluated and analyzed. The experiments show that the GPU-based 802.11a and 802.16 PHY meet the real-time requirement and demonstrate good bit error ratio (BER) performance. The performance comparison indicates that our GPU-based implemented modules have better flexibility and throughput to the current ones.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.35-47
• /
• 2011

The purpose of this study is to examine the influence of Chinese high and level vs. rising tone on the pitch pattern of corresponding Sino-Korean words delivered by Chinese learners of Korean and to examine the aspects how these two tones of corresponding Chinese words affect the pitch patterns of Sino-Korean words. Scope of this research is limited to the Chinese learners of Korean, especially when they pronounce same-form-same-meaning Sino-Korean words. In this study, Chinese learners pronounced both Chinese words and corresponding Sino-Korean words. By using the software learners' pitch pattern were recorded, analyzed, and compared with the tone of corresponding Chinese words. Experimental results showed that Sino-Korean words were affected by Chinese 'high and level tone - high and level tone', 'high and level tone - rising tone', 'high and level tone - falling-rising tone', 'high and level tone - falling tone' and 'rising tone - falling tone' when they started with lenis sounds. On the other hand when Sino-Korean words started with aspirated sounds they were affected by Chinese 'rising tone - high and level tone', 'rising tone - rising tone', 'rising tone - falling-rising tone', 'rising tone - falling tone'. In conclusion, the Chinese learners' pitch patterns of Sino-Korean words are affected by both Chinese high and level & rising tone, especially when Sino-Korean words started with lenis sounds they were more affected by Chinese high and level tone, on the other hand Chinese rising tone influence Sino-Korean words more when they were started with aspirated sounds.

• Phonetics and Speech Sciences
• /
• v.4 no.2
• /
• pp.21-31
• /
• 2012

The purpose of this study is to find the influence of Chinese falling-rising tone on the pitch pattern of corresponding partly-different-form-same-meaning Sino-Korean words delivered by Chinese learners of Korean and to examine how the falling-rising tone of corresponding Chinese words affects the pitch patterns of Sino-Korean words. The scope of this research is limited to Chinese learners of Korean, especially on two groups of Sino-Korean words - AB:CB type and AB:AC type that the are second-most frequently occuring different-form-same-meaning Sino-Korean words. In this study, Chinese learners pronounced both Chinese words and corresponding Sino-Korean words. Learners' pitch patterns were recorded and analyzed using software and compared with the tone of corresponding Chinese words. Experimental results showed that AB:CB type Sino-Korean words were not affected by Chinese 'falling-rising tone - high and level tone'. As well as AB:CB type, experimental results showed there were no significant influence on the pitch pattern of AB:AC type Sino-Korean words by Chinese falling-rising tone. But it was clear that Chinese learners' made pitch errors on both AB:CB type and AB:AC type Sino-Korean words. In conclusion, the Chinese learners' pitch patterns of partly-different-form-same-meaning Sino-Korean words are different from Korean native speakers', but their pitch errors cannot be attributed to Chinese falling-rising tone.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.156-156
• /
• 2011

VPH (Volume Phase Hologram) grating is one of the transmission gratings and is known as its remarkable efficiency (>90%). It has two different densities of gelatins causing interference patterns. The VPH grating is favored in many astronomical instruments these days and also IGRINS, which is up coming near infrared high-resolution spectroscope expected to see the first light next year, uses the VPH grating as its cross-disperser. The infrared astronomical instruments operate at cryogenic temperature (~100K) in order to cut down thermal noise and the optical components of IGIRNS will be operated at 130K. The VPH grating is sandwiched in between fused silica or glass and glued together using optical adhesive. IGRINS is expected to go through 50 times of thermal cycling in 10 years including the performance test and this research is to check whether the physical characteristic such as the adhesion or dichromatic gelatin does not break and change from the several cryogenic thermal cycling. The two identical test gratings provided from Kaiser Optical System, Inc. are used in this test. One VPH grating is cooled down to 100K for 2 hours with maximum dT/dt = 5 and warmed up to the room temperature and another grating is kept stored in the room temperature and used as a control sample. In order to check the change, we inspected the grating with eyes and checked its efficiency and transmission at the room temperature every 10 cycling. From the 40 times of cryogenic temperature cool down cycling, the VPH grating showed no signs of change within the error compared to the control sample. We concluded the VPH grating is durable through several cryogenic thermal cycling.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12C
• /
• pp.764-773
• /
• 2011

Despite enormous performance gain with multi-antenna transmission in the single cell environment, its gain diminishes out in the multi-cell environment due to interference. It is also very hard to solve the efficient downlink beamforming with low complexity in multi-cell environment. First, this paper shows that the asymptotically sum rate optimal downlink beamformings at low and high SNR are maximum ratio transmit (MRT) and zero forcing (ZF) beamforming in the multi-cell system, respectively. Secondly, exploiting the asymptotically optimal downlink beamforming, we develop simple two types of near optimal downlink beamforming schemes having the form of minimum mean squared error (MMSE) beamforming obtained from the dual uplink problem. For each type, three different subclasses are also considered depending on the computational complexity. The simulation results show that the proposed near optimum algorithms provide the trade-off between the complexity and the performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.179-190
• /
• 1998

One of the most important topics of recent years is that a multimedia technology such as wireless ATM has been introduced in radio systems for video, voice and data transmission. A major problem in such systems is the occurrence of errors due to multipath fading or interference. To combat this problem, forward error correction (FEC) coding is commonly used as a means of eliminating these errors. This paper has analyzed theoretically the effect of fading to design effective wireless ATM system. The BER, CLR, and CER of wireless ATM system adopting FEC coding and diversity reception techniques have been derived in fading environment. Also, simulations of BER and CLR have been carried out and compared with the above theoretical results.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.407-412
• /
• 2014

In this paper, we propose an underwater acoustic communication of FH-MFSK(Frequency-Hopped Multiple Frequency Shift Keying) system with multiple orthogonal property. Generally, the processing of FSK(Frequency Shift Keying) method is simple, but it is vulnerable to ISI (Inter-Symbol Interference) caused by multipath transmission. In this paper, the orthogonal codes are generated with the same number of transmitting symbols, and these codes are corresponding to multiple frequencies. We used m-sequence to generate multiple orthogonal codes. We compared the performance of proposed method with conventional MFSK method via the experiment. As a result, we confirmed that the proposed method shows 6~10 % lower error rate at 100 bps than conventional method.