• 한국항행학회논문지
• /
• 제6권4호
• /
• pp.318-325
• /
• 2002

본 논문에서는 FCC에서 제정한 허용 주파수 3.1~10.6 GHz 대역 내에서 사용 가능한 모노펄스를 이용하여 PPM 변조된 TH IR 시스템 시뮬레이터를 AWGN 환경에서 설계하고 시뮬레이터를 이용하여 모노사이클 펄스 특성 및 시스템 성능을 분석하였다. 또한, 간섭 환경에 따른 시스템 성능을 알아보기 위해 다원접속 간섭과 공유 주파수 대역에 존재하는 협대역 시스템 신호를 간섭 신호로 고려하였다. 여기에서 협대역 시스템 간섭 신호는 IR 시스템 대역폭에 비해 매우 협소하고 IR 시스템보다 큰 진폭을 갖기 때문에 협대역 간섭 신호를 간섭 전력과 대역 점유율을 고려하여 IR 시스템에서 간섭 환경에 따른 시스템 성능을 분석하였다.

• Wind and Structures
• /
• 제28권2호
• /
• pp.111-128
• /
• 2019

In this paper an octagon plan shaped building (study building) in presence of three square plan shaped building is subjected to boundary layer wind flow and the interference effects on the study building is investigated using Computational fluid dynamics. The variation of the pressure coefficients on different faces of the octagon building is studied both in isolated and interference conditions. Interference Factors (IF) are calculated for different faces of the study building which can be a powerful tool for designing similar plan shaped buildings in similar conditions. A metamodel of the IF, in terms of the distances among buildings is also established using Response Surface Method (RSM). This set of equations are optimized to get the optimum values of the distances where the IF is unity. An upstream Interference zone for this building setup and wind environment is established from these data. Uncertainty principle is also utilised to determine the optimum positions of the interfering buildings considering the uncertain nature of wind flow for minimum interference effect. The proposed procedure is observed to be computationally efficient in deciding optimum layout at buildings often required in city planning. The results show that the proposed RSM-based optimization approach captures the interference zone accurately with substantially less number of experiments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권6호
• /
• pp.2859-2872
• /
• 2019

Interference alignment (IA) has been a powerful approach to achieve the maximum degree of freedom (DoF) for K users multiple-input-multiple-output (MIMO) interference channels. However, due to the feasibility constraint, aligning all the interference signals at each receiver is impractical for large K without symbol extension. In this paper, we propose two best-effort interference alignment (BEIA) schemes that the network selects the maximum number of interfering transmitters to align their signals given the feasibility conditions when each transmitter-receiver pair has a constant number of data streams. Besides, in case of not all interfering signals aligned at each receiver, an upper bound of the average throughput is derived. Simulation results show that the proposed schemes have superiority over the traditional methods, such as time division multiple access (TDMA) and cluster IA(CIA), in low and moderate signal-to-noise ratio (SNR) region in terms of average user throughput. In addition, the proposed max-min relative interference distance alignment scheme outperforms the proposed scheme of equal interfering transmitters number alignment in terms of both average user throughput and minimum user throughput.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권8호
• /
• pp.2170-2187
• /
• 2023

The general interference is the imperative trouble for simultaneous wireless information and power transfer (SWIPT) system. Although interference has bad influences on the performance of the system, it carries energy simultaneously. In this paper, the energy-constrained relay of the SWIPT system needs to spend much time on energy collecting (EC) in the information transmission (IT) period. Therefore, we propose the scheme of interference signal energy collecting (ISEC) when the interference is strong, and the SWIPT system does not carry out IT. The relay of the system continues to collect energy and stores it until the interference has minimal impact on IT. Then the system performs IT. We divide the collected interference energy equally into several parts, and each IT block receives one part. The proposed scheme is appealing because it can reduce the time of EC in IT period to make the relay spends more time forwarding the received signal in order to improve the performance of the system throughput. Furthermore, we propose a time-switching (TS) protocol based on EC at the relay. And it allows the relay forwarding signal at an appropriate power. Under the protocol, the time of EC can be flexible according to the forwarding power that we give so that the collected energy can be used more efficiently. We give the expressions of the system throughput according to the proposed scheme and protocol. Moreover, the influence of the interference power on the system throughput is also studied.

• 한국통신학회논문지
• /
• 제27권4A호
• /
• pp.330-335
• /
• 2002

DS-CDMA 시스템에서는 다중 접속으로 인하여 다중 접속 간섭 문제가 발생되어진다. 이 문제를 해결하기 위하여 간섭 제거기가 사용되어졌다. 기존 간섭 제거 수신기는 연속 간섭 제거기와 안테나 어레이를 적용한 구조이다. 이 구조에서 가중치 벡터를 갱신하는 방법에 따라서 방법 I과 II로 구별되어진다. 본 논문에서는 기존 구조에서 가중치 벡터를 갱신하기 위하여 constant modulus 알고리즘의 비용함수를 사용한 적응 블라인드 CMA 어레이 간섭 제거 수신기를 제안하였다. 모의 실험은 가우시안 환경 하에서 SIR과 BER 곡선에 의해서 제안된 수신기와 연속 간섭 제거기예 안테나 어레이를 확장한 기존 간섭 제거 기술들과 비교하였다. 모의 실험 결과, 제안된 수신기가 기존 수신기 방법 I보다 SIR 곡선에서 1.5[dB]의 SIR 이득을 지니고, 방법 II보다는 약 0.5[dB]의 SIR 이득을 지닌다. BER 곡선에서는 방법 I보다는 약 2[dB] SNR 이득을 지니고, 방법II보다는 약 0.5[dB] SNR 이득을 지닌다. 따라서 제안된 간섭 제거기가 기존 간섭 제거 기들보다 더 나은 성능을 지니고 있음을 보여 주고 있다.

• 한국정보통신학회논문지
• /
• 제17권1호
• /
• pp.1-7
• /
• 2013

본 논문에서는 강우 레이더간 간섭 현상과 강우 레이더의 스퓨리어스 방사 신호로부터 발생되는 인접 무선국에 대한 간섭 현상을 분석한다. 강우 레이더는 강우강도를 측정하고 강우를 예측하기 위하여 수평 지향각에서 운영되고 있으며, 높은 출력으로 동일 또는 인접대역의 통신기기 및 레이더간 간섭현상이 발생할 수 있다. S대역 주파수 영역의 전파 특성과 강우 레이더의 전파 간섭 보호비를 도출하여 강우 레이더간 간섭 현상과 인접 무선국의 간섭 영향을 분석한다. 아울러 인접 무선국에 대한 강우 레이더의 전파 간섭영향과 강우 레이더의 스퓨리어스 방사 특성으로부터 강우 레이더의 방사 스펙트럼 특성을 제안한다. 인접 무선국에 대한 간섭을 최소화하기 위해서는 105 dB 이상의 스퓨리어스 억압 특성을 가져야 하며, 레이더간 간섭을 최소화하기 위해서는 운용 시각 및 PRF를 다르게 설정하여 운용하여야 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권1호
• /
• pp.26-51
• /
• 2009

In this paper, we propose an empirical framework for modeling and emulating interference in multi-hop wireless ad-hoc networks. Wireless interference causes wide variation in the frame delivery rate at a link, and thus we cannot represent the state of the link with only two states, connected state and disconnected state, as in wired networks. We first investigate wireless interference in detail, in order to accurately calibrate the interference and identify its underlying attributes, and then we simulate the diverse occurrences and effects of interference, after incorporating the scheme into a simulation tool. Based on these observations, we devise a modeling and simulation framework with several control parameters, and perform an extensive set of simulation studies. The simulation results indicate that the proposed framework enables us to examine various attributes of wireless interferences and their effects on wireless network protocols and systems.

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.816-825
• /
• 2006

This paper describes the development of a web-based interference verification system in the mold design process. Although several commercial CAD systems furnish interference verification functions, those systems are very expensive and inadequate to perform collaborative works over the Internet. In this paper, an efficient and precision hybrid interference verification algorithm for the web-based interference verification system over the distributed environment has been studied. The proposed system uses lightweight CAD files produced from the optimally transformed CAD data through ACIS kernel and InterOp. Collaborators related to the development of a new product are able to verify the interference verification over the Internet without commercial CAD systems. The system reduces production cost, errors and lead-time to the market. Validity of the developed system is confirmed through case studies.

• Journal of electromagnetic engineering and science
• /
• 제9권3호
• /
• pp.141-145
• /
• 2009

Interference scenarios involving and a methodology for a terrestrial international mobile telecommunication(IMT) system and mobile-satellite service(MSS) system in a co-channel environment are established. Taking into account a practical deployment situation for both systems, a computational simulation of interference in terms of the ratio of interference power to thermal noise(I/N) is performed in order to evaluate the co-frequency interference with the IMT system caused by the MSS system. The methodology and results could be used for planning an IMT deployment without an unacceptable interference impact caused by the MSS system.

• Journal of electromagnetic engineering and science
• /
• 제18권4호
• /
• pp.254-260
• /
• 2018

In this study, we suggest an emulator for generating multiple heterogeneous interference signals in the Korean radio frequency identification/ubiquitous sensor network (RFID/USN) frequency band. The proposed emulator uses only one universal software radio peripheral to generate multiple heterogeneous interference signals more economically. Moreover, the physical and media access control parameters can be adjusted in real time using the LabVIEW program, thereby making it possible to create various time-varying interference environments easily. As an example showing the capability of the proposed emulator, multiple interference signals consisting of a frequency-hopping RFID signal and two LoRa signals with different spreading factors were generated. The generated signals were confirmed in both frequency and time domains. From the experimental results, we verified that our emulator could successfully generate multiple heterogeneous interference signals with different frequency and time domain characteristics.