• 정보처리학회논문지A
• /
• 제15A권2호
• /
• pp.101-110
• /
• 2008

유비쿼터스 컴퓨팅은 컴퓨터 시스템의 물리적인 공간을 확장시켰으며, 보다 동적인 분산 시스템으로 이끌었다. 이러한 환경에서는 다양한 디바이스와 자원 그리고 사용자 요구사항에 대한 새로운 QoS 파라미터가 요구되고 있다. 본 논문에서는 유비쿼터스 컴퓨팅 환경에 적합한 정적 QoS 파라미터와 동적 QoS 파라미터를 정의한 새로운 하이브리드 QoS 관리 모델을 제안하였다. 제안한 시스템 구성은 분산된 형태로 종단간 QoS 제어 및 관리할 수 있도록 클라이언트 측에는 QoS 제어 관리를 위한 모듈(QoS CMM), 서버 측에 QoS 관리 모듈(QoS MM), 그리고 중앙형 QoS 제어 및 관리를 위한 자원 QoS 관리 모듈(RQoS MM)을 구성하였다. 정적 QoS 파라미터는 자원 QoS 관리 모듈에서 처리하며, 동적 QoS 파라미터에 대한 전체적인 QoS 제어는 QoS CMM에 의해 다자간 통신의 경우에 서버 측의 부담을 최소화 시킬 수 있도록 하였다. 끝으로, 그래픽 사용자 인터페이스를 통해 위치 기반 애플리케이션으로 클라이언트 단말형태인 데스크탑 PC, 노트북, PDA에 따른 멀티미디어 서비스 수행 결과 화면을 보였다.

• 해양환경안전학회지
• /
• 제21권5호
• /
• pp.531-537
• /
• 2015

태양광 패널로부터 출력을 최대로 얻기 위해서는 신뢰성이 높은 태양광 추적 장치가 설계되어야 한다. 본 논문에서는 LabVIEW 프로그램을 이용하여 퍼지 제어를 기반으로 구현한 2축 태양광 추적 장치 시스템을 제작하여 그 성능에 대해서 알아보았다. 태양광 패널의 움직임을 제어하기 위한 구현된 퍼지 의사결정 시스템의 사용자 인터페이스를 통하여 모든 파라미터를 제어하고 확인할 수 있는 지능제어기와 기계적인 구동부분의 설계가 연구의 중심이 되고 있다. 실제 태양광 추적시스템을 개발하여 환경, 날씨, 계절 및 빛 상태와 같은 영향에 대해서 분석하였다. 태양광 추적장치는 실제 상황에서 시험하였고 시스템 동작과 관련된 모든 변수들은 기록되고 분석되었다. 제안한 태양광 추적시스템을 활용할 경우 고정식 패널에 비해 날씨에 따라 다르지만 최대 약 38% 정도의 더 높은 효율을 얻을 수 있어 자동으로 추적할 때 매우 좋은 결과를 얻을 수 있었다.

• Geomechanics and Engineering
• /
• 제9권5호
• /
• pp.645-667
• /
• 2015

Single treatment and staged treatments in vertical wells are widely applied in sandstone and mudstone thin interbedded (SMTI) reservoir to stimulate the reservoir. The keys and difficulties of stimulating this category of formations are to avoid hydraulic fracture propagating through the interface between shale and sand as well as control the fracture height. In this paper, the cohesive zone method was utilized to build the 3-dimensional fracture dynamic propagation model in shale and sand interbedded formation based on the cohesive damage element. Staged treatments and single treatment were simulated by single fracture propagation model and double fractures propagation model respectively. Study on the changes of fracture vicinity stress field during propagation is to compare and analyze the parameters which influence the interfacial induced stresses between two different fracturing methods. As a result, we can prejudge how difficult it is that the fracture propagates along its height direction. The induced stress increases as the pumping rate increasing and it changes as a parabolic function of the fluid viscosity. The optimized pump rate is $4.8m^3/min$ and fluid viscosity is $0.1Pa{\cdot}s$ to avoid the over extending of hydraulic fracture in height direction. The simulation outcomes were applied in the field to optimize the treatment parameters and the staged treatments was suggested to get a better production than single treatment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1933-1938
• /
• 2004

Nucleate boiling experiments with constant wall temperature of heating surface were performed using R113 for almost saturated pool boiling conditions. A microscale heater array and Wheatstone bridge circuits were used to maintain a constant wall temperature condition and to measure the heat flow rate with high temporal and spatial resolutions. Bubble images during the bubble growth were taken as 5000 frames a sec using a high-speed CCD camera synchronized with the heat flow rate measurements. The geometry of the bubble during growth time could be obtained from the captured bubble images. The bubble growth behavior was analyzed using the new dimensionless parameters for each growth regions to permit comparisons with previous results at the same scale. We found that the new dimensionless parameters can describe the whole growth region as initial and later respectively. The comparisons showed good agreement in the initial and thermal growth regions. The required heat flow rate for the volume change of the observed bubble was estimated to be larger than the instantaneous heat flow rate measured at the wall. Heat, which is different from the instantaneous heat supplied through the heating wall, can be estimated as being transferred through the interface between bubble and liquid even with saturated pool conditions. This phenomenon under a saturated pool condition needs to be analyzed and the data from this study can supply the good experimental data with the precise boundary condition (constant wall temperature).

• 대한전자공학회논문지TC
• /
• 제43권12호
• /
• pp.83-88
• /
• 2006

본 논문에서는 일반적인 손실매질의 다층구조로 이루어진 마이크로 스트립선로의 손실특성의 개선을 위한 새로운 구조를 제안한다. MIS(도체-부도체-반도체) 구조로 된 전송선로를 해석하기 위하여 기본적으로 특성임피던스와 전파상수의 추출에 기초한 일반적인 특성화 절차가 사용되고, Si와 SiO2층 사이에 0전위를 가진 도체를 일정한 간격의 주기적인 배열로 고안된 새로운 모델의 MIS구조에 대한 유한차분법을 이용한 해석방법이 사용된다. 특히 전송선로에 대한 유전체의 영향을 줄이기 위하여 0전위를 가진 주기적인 결합의 도체로 이루어진 구조가 시간영역의 신호를 통해 시험된다. 다양한 손실률을 가진 불완전 유전체에 따른 전압 및 전류의 크기뿐만 아니라 주파수 의존적인 추출된 전송선로 파라미터와 등가회로 파라미터가 주파수 함수로서 나타내진다. 특히 본 논문에서 제안한 새로운 구조의 불완전 유전체에 대한 전송선로 파라미터가 주파수 함수로 구해진다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.1-2
• /
• 2000

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.

• 한국표면공학회지
• /
• 제36권1호
• /
• pp.14-21
• /
• 2003

Thin films of ZrO$_2$ and TiO$_2$ were deposited on Si(100) substrates using RF magnetron sputtering technique. To study an influence of the sputtering parameters, systematic experiments were carried out in this work. XRD data show that the $ZrO_2$ films were mainly grown in the [111] orientation at the annealing temperature between 800 and $1000^{\circ}C$ while the crystal growth direction was changed to be [012] at above $1000^{\circ}C$. FT-IR spectra show that the oxygen stretching peaks become strong due to $SiO_2$ layer formation between film layers and silicon surface after annealing, and proved that a diffusion caused by either oxygen atoms of $ZrO_2$ layers or air into the interface during annealing. Different crystal growth directions were observed with the various deposition parameters such as annealing temperature, RF power magnitude, and added $O_2$ amounts. The growth rate of $TiO_2$ thin films was increased with RF power magnitude up to 150 watt, and was then decreased due to a sputtering effect. The maximum growth rate observed at 150 watt was 1500 nm/hr. Highly oriented, crack-free, stoichiometric polycrystalline $TiO_2$<110> thin film with Rutile phase was obtained after annealing at $1000^{\circ}C$ for 1 hour.

• 한국통신학회논문지
• /
• 제25권9B호
• /
• pp.1527-1533
• /
• 2000

MIS(도체-부도체-반도체) 구조로된 전송선로를 해석하기 위하여 기본적으로 특성임피던스와 전파상수의 추출에 기초한 일반적인 특성화 절차가 사용된다. 본논문에서는 Si와 Si02층 사이에 0전위를 가진 도체를 일정한 간격의 주기적인 배열로 고안된 새로운 모델의 MIS구조에 대한 유한차분법을 이용한 해석방법을 제안한다. 특히 전송선로에 대한 유전체의 영향을 줄이기 위하여 0전위를 가진 주기적인 결합의 도체로 이루어진 구조가 시간영역의 신호를 통해 시험된다. Quality factor 뿐만아니라 주파수 의존적인 추출된 전송선로 파라미터와 등가회로 파라미터가 주파수 및 0전위 도체 간격의 함수로서 나타내진다. 특히 전송선로의 Quality factor가 특성임피던스 및 유효유전 상수의 큰 변화없이 개선될수 있음을 볼 수 있다.

• 한국기계가공학회지
• /
• 제20권6호
• /
• pp.100-107
• /
• 2021

As a significant technology in the smartization era promoted by the Fourth Industrial Revolution, the secondary battery industry has recently attracted significant attention. The demand for lithium-ion batteries (LIBs), which exhibit excellent performance, is considerably increasing in different industrial fields. During the manufacturing process of LIBs, it is necessary to join the cathode and anode sheets with thicknesses of several tens of micrometers to lead taps of the cathode and anode with thicknesses of several hundreds of micrometers. Ultrasonic welding exhibits excellent bonding when bonded with very thin plates, such as negative and positive electrodes of LIBs, and dissimilar and highly conductive materials. In addition, ultrasonic welding has a small heat-affected zone. In LIBs, Cu is mainly used as the negative electrode sheet, whereas Cu or Ni is used as the negative electrode tab. In this study, one or two electrode sheets (t0.025 mm Cu) were welded to one lead tab (t0.1 mm Cu). The welding energy and pressure were used as welding parameters to determine the welding strength of the interface between two or three welded materials. Finally, the effects of these welding parameters on the welding strength were investigated.

• 천문학회지
• /
• 제54권5호
• /
• pp.139-155
• /
• 2021

We present an updated version of the multilayer spectral inversion (MLSI) recently proposed as a technique to infer the physical parameters of plasmas in the solar chromosphere from a strong absorption line. In the original MLSI, the absorption profile was constant over each layer of the chromosphere, whereas the source function was allowed to vary with optical depth. In our updated MLSI, the absorption profile is allowed to vary with optical depth in each layer and kept continuous at the interface of two adjacent layers. We also propose a new set of physical requirements for the parameters useful in the constrained model fitting. We apply this updated MLSI to two sets of Hα and Ca II line spectral data taken by the Fast Imaging Solar Spectrograph (FISS) from a quiet region and an active region, respectively. We find that the new version of the MLSI satisfactorily fits most of the observed line profiles of various features, including a network feature, an internetwork feature, a mottle feature in a quiet region, and a plage feature, a superpenumbral fibril, an umbral feature, and a fast downflow feature in an active region. The MLSI can also yield physically reasonable estimates of hydrogen temperature and nonthermal speed as well as Doppler velocities at different atmospheric levels. We conclude that the MLSI is a very useful tool to analyze the Hα line and the Ca II 8542 line spectral daya, and will promote the investigation of physical processes occurring in the solar photosphere and chromosphere.