• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2675-2685
• /
• 1994

A study has been conducted to provide the experimental information for the velocity and temperature profiles of steam-air mixutre and to investigate their roles on the film condensation with wavy interface. Saturated gas mixture of steam-air was made to flow through the nearly horizontal$(4.1^{\circ})$ square duct of 0.1m width and 1.56m length at atmospheric pressure, and was condensated on the bottom cold plate. The air mass fraction in the gas mixture was changed from zero(W =0, pure steam) to one(W =1, pure air), and the bulk velocity was varied from 2 to 4 m/s. Water film was injected concurrently to investigate the effect of wavy interface on the condensation. The velocity and temperature profiles were measured by LDA system and thermocouples along the three parameters ; air mass fraction, mixture velocity and film flow rate. The profiles moved toward the interface with increasing steam mass fraction, mixture velocity and film flow rate. The Prandtl and Schmidt numbers were near one in the present experimental range, however there was no complete similarity between the velocity and temperature profiles of gas mixture. And the heat transfer characteristics and interfacial structure were coupled with each other.

• 대한기계학회논문집A
• /
• 제32권5호
• /
• pp.387-395
• /
• 2008

Stress distribution and interfacial debonding process at the interface between a rubber mold and a powder compact were analyzed during unloading under cold isostatic pressing. The Cap model proposed by Lee and Kim was used for densification behavior of powder based on the parameters involved in the yield function of general Cap model and volumetric strain evolution. Cohesive elements incorporating a bilinear cohesive zone model were also used to simulate interfacial debonding process. The Cap model and the cohesive zone model were implemented into a finite element program (ABAQUS). Densification behavior of powder was investigated under various interface conditions between a rubber mold and a powder compact during loading. The residual tensile stress at the interface was investigated for rubber molds with various elastic moduli under perfect bonding condition. The variations of the elastic energy density of a rubber mold and the maximum principal stress of a powder compact were calculated for several interfacial strengths at the interface during unloading.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.102-107
• /
• 2001

Interfacial cracks between an isotropic and orthotropic material, subjected to static far field tensile loading are analyzed using the technique of photoelasticity. The fracture parameters are extracted from the full-field isochromatic data and the same are compared with that obtained using boundary collocation method. Dynamic Photoelasticity combined with high-speed digital photography is employed for capturing the isochromatics in the case of propagating interfacial cracks. The normalized stress intensity factors for static crack is greater when $\alpha=90^{\circ}C$ (fibers perpendicular to the interface) than when $\alpha=0^{\circ}C$ (fiber parallel to the interface) and those when $\alpha=90^{\circ}C$ are similar to ones of isotropic material. The dynamic stress intensity factors for interfacial propagating crack are greater when $\alpha=0^{\circ}C$ than $\alpha=90^{\circ}C$. The relationship between complex dynamic stress intensity factor $|K_D|$ and crack speed C is similar to that for isotropic homogeneous materials, the rate of increase of energy release rate G or $|K_D|$ with crack speed is not as drastic as that reported for homogeneous materials.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.639-646
• /
• 1998

To evaluate the effect of interface conditions and retention grooves in the Class V composite resin restoration of the maxillary first premolar, the distribution of the values of stress and displacement was analyzed with the two-dimensional finite element method. The results were obtained as follows : 1. Boundary elements and Stiffness values could be used as the interface parameters in the, finite element method. 2. The amount of restriction of the displacement at the cervical margin by placing a retention groove at the cervical wall was about three times as high as that by placing a retention groove at the occlusal wall. 3. Because of the relative amount of tensile components of the stress values in the bucco-lingual direction, the possibility of dislocation of the restoration was much higher at the cervical margin than at the occlusal margin. 4. It might be recommended that both occlusal and cervical retention grooves be used routinely, but if one, it be placed at the cervical wall.

• 한국통신학회논문지
• /
• 제21권3호
• /
• pp.652-663
• /
• 1996

본 논문에서는 PC통신망에서의 호손률을 분석하였다. PC통신망에서 전화망으로부터 발생한 호는 먼저 패킷교환망과 전화망을 연결해 주는 통신처리장치로 접속을 요구한다. 이어서 이 단계로 패킷교환망에 접속되어 있는 특정 데이타베이스로 다음의 패킷호가 요구된다. 호손률의 분석은 이상에서 두 접속링크, 통신처리장치의 전화망접속포트와 데이타베이스의 패킷교환망 접속링크에서 이루어졌다. 또한 수치결과를 통하여 시스템 변수가 망의 성능에 미치는 영향으르 살펴보았으며 각 접속점의 용량이 다른 접속저의 성능에 미치는 영향을 볼 수 있었다.

• 상하수도학회지
• /
• 제20권2호
• /
• pp.265-272
• /
• 2006

While sludge settles down in a column, sludge settling characteristic is influenced by effect parameters, interparticle force, wall effect etc. As the height of a column changes, the settling velocity of sludge-water interface changes, too. At lower sludge concentration, particular effect was not observed by the difference of column height, however it was observed that settleability of sludge was greatly influenced by column height when sludge settling was poor or sludge concentration was high. It is therefore required to consider the effect of column height when the power model for sludge interface settling is established. In the tests, there was hardly any $SVI_{ts}$(SVI after "t" minutes) difference in each column after 10min at $1.5kg/m^3$ of sludge concentration. When sludge concentration was at $2.5kg/m^3$, $SVI_{ts}$ tended to be constant after 20min. At $3.5kg/m^3$, $SVI_{ts}$ increased to 30minuets. The purpose of this work is to establish the correction factor that is able to compensate the errors derived from each different height of column.

• Journal of Information Processing Systems
• /
• 제15권4호
• /
• pp.986-1016
• /
• 2019

Mobile user interface pattern (MUIP) is a kind of structured representation of interaction design knowledge. Several studies have suggested that MUIPs are a proven solution for recurring mobile interface design problems. To facilitate MUIP selection, an effective clustering method is required to discover hidden knowledge of pattern data set. In this paper, we employ the semi-supervised kernel fuzzy c-means clustering (SSKFCM) method to cluster MUIP data. In order to improve the performance of clustering, clustering parameters are optimized by utilizing the global optimization capability of particle swarm optimization (PSO) algorithm. Since the PSO algorithm is easily trapped in local optima, a novel PSO algorithm is presented in this paper. It combines an improved intuitionistic fuzzy entropy measure and a new population search strategy to enhance the population search capability and accelerate the convergence speed. Experimental results show the effectiveness and superiority of the proposed clustering method.

• 한국지반공학회논문집
• /
• 제38권5호
• /
• pp.5-17
• /
• 2022

말뚝(pile)은 연약한 지반에 구조물을 설치하기 위하여 지중에 관입시키는 매개체로서, 특히 PHC말뚝은 설계기준강도 80MPa 이상의 고강도 콘크리트를 사용하여 제작하므로 압축력과 휨모멘트에 대한 저항성이 우수하다. 또한 강관 말뚝 대비 경제성에서 유리하며 공장에서 생산되므로 품질확보 및 관리가 용이하다. 하지만 PHC말뚝의 설계 시 지지력에 영향을 미치는 주면마찰력은 단순히 경험식 또는 N값 등을 이용한 추정치에 의한 설계가 이루어지고 있으며, 특히 최근 빈도수가 급증하고 있는 국내 지진에 대하여 PHC말뚝 주면부에 형성되는 지반과의 접촉면 동적거동에 관한 실험적 연구 사례는 미미한 실정이다. 또한 지반 내 지하수의 pH 값과 같은 지반환경적 요소 역시 고려되지 않고 있다. 본 연구에서는 지하수의 pH 값을 고려하여 산성, 중성, 염기성 용액에 1개월간 수침시킨 콘크리트 시료를 점토의 구성광물인 카올리나이트 시료와 접촉시키고, 반복 단순전단시험을 수행하였다. 반복 단순전단시험은 상재압 0.2MPa 및 0.4MPa에 대하여 각각 수행하였고 그 결과를 비교하였다. 또한 접촉면의 동적 거동을 합리적으로 표현하기 위하여 교란상태개념(Disturbed State Concept)을 도입하여 교란상태함수를 구성하는 매개변수를 도출하였다. 그 결과 염기성 수침시료에 대하여 접촉면의 교란도가 가장 급격히 증가하였고 구속압이 작을 경우 보다 작은 누적 전단변형률에서 조기에 접촉면이 파괴상태에 근접하는 결과를 나타내었다. 또한 이러한 경향을 정량적으로 표현하는 교란상태함수의 매개변수를 새로이 제시하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.58-58
• /
• 2001

• 한국세라믹학회지
• /
• 제22권5호
• /
• pp.43-46
• /
• 1985

Constitutional supercooling due to concentration gradient at solid-liquid interface in the melt can be avioded by increasing rotational speed for growing $LiNbO_3$ single crystals from the stoichiometric melt. Growth conditions for high quality crystals were determined by rotational speed by which other growth parameters were adjusted.