• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.4
• /
• pp.18-23
• /
• 2011

Generally, the digital circuit card can be tested by automatic test equipment using LASAR(Logic Automated Stimulus and Response). This paper proposes the ROM data extracting algorithm which can test the digital circuit card that consists usually ROMs. We are implemented of the proposed fault detecting program by LabWindow/CVI 8.5 and the digital automatic test instrument with NI-VXI(National Instrument - Versa Bus Modular Europe eXtentions for Instrumentation) card. We also make an interface circuit board connecting the digital test instrument and the digital circuit card. It shows the good performance of getting the data from ROMs.

• Smart Structures and Systems
• /
• v.22 no.1
• /
• pp.57-70
• /
• 2018

For the long-term structural health monitoring of civil structures, the effect of ambient temperature variation has been regarded as one of the critical issues. In this study, a principal component analysis (PCA)-based algorithm is proposed to filter out temperature effects on electromechanical impedance (EMI) monitoring of prestressed tendon anchorages. Firstly, the EMI monitoring via a piezoelectric interface device is described for prestress-loss detection in the tendon anchorage system. Secondly, the PCA-based temperature filtering algorithm tailored to the EMI monitoring of the prestressed tendon anchorage is outlined. The proposed algorithm utilizes the damage-sensitive features obtained from sub-ranges of the EMI data to establish the PCA-based filter model. Finally, the feasibility of the PCA-based algorithm is experimentally evaluated by distinguishing temperature changes from prestress-loss events in a prestressed concrete girder. The accuracy of the prestress-loss detection results is discussed with respect to the EMI features before and after the temperature filtering.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.116-118
• /
• 2000

The modern power system including lots of measuring devices and controller is large and complex total information system. A Lot of data and system information are transmitted to operators, and analysing these information and system management is very important. Recently, GUI(Graphic Users Interface) is emphasized as a method that operators carry out their duties, effectively. In this paper. a simulator that can show state estimation and detection of bad measuring devices is introduced for domestic 154kV/22.9kV distribution substations. C language and Visual Basic is used for this simulator. and TCP/IP is adopted to consider connection with a Power system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.379-384
• /
• 2009

A human gaze detection and tracing method is importantly required for HMI(Human-Machine-Interface) like a Human-Serving robot. This paper proposed a novel three-dimension (3D) human gaze estimation method by using a face recognition, an orientation estimation and SVMs (Support Vector Machines). 2,400 images with the pan orientation range of $-90^{\circ}{\sim}90^{\circ}$ and tilt range of $-40^{\circ}{\sim}70^{\circ}$ with intervals unit of $10^{\circ}$ were used. A stereo camera was used to obtain the global coordinate of the center point between eyes and Gabor filter banks of horizontal and vertical orientation with 4 scales were used to extract the facial features. The experiment result shows that the error rate of proposed method is much improved than Liddell's.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.8
• /
• pp.906-915
• /
• 1988

The reliability enhancement is the critical issue in many computer applications, particulary in process control system. In this paper we describe how to achieve the reliability improvement in control system which is based on multiprocessors. The proposed method is accomplished by using the techniques of fault detection which composed by internal and external fault detections, fault isolation for removing the fault propagation, safety action for driving safe input, and fault diagnosis. This approach is experimented and asopted in boiler backup control system constructed by VMEbus system, CPU boards, graphic system, and other interface boards with UNIX operating system.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.109-110
• /
• 2006

The performance of a digital baseband signal processing and data transmission rate depends on the modulation technique. In this paper, We implemented DSP communication system for Underwater acoustic communication using by adaptive BPSK modem technique. In order to implement adaptive modem, we suggested SNR detection block. SNR detection block has the reference SNR value that selects between window filter path and matched filter path. In this paper, suggested system is based on software interface and all Hardware(PLL, modem filter, equalizer etc) is implemented by software, exclusive of DSP, A/D, D/A converter, SDRAM and Flash memory.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.2
• /
• pp.42-49
• /
• 1989

It has not been performed to inspect the underclad cracking in Korea nuclear plant since there is no Code Requirements for inspection. However, underclad cracks in nuclear pressure vessels were reported firstly in 1970. The objection of this study is to be established the ultrasonic inspection techniques for underclad cracking. The ultrasonic inspection of bimetalic stainless steel weld is very difficult by high attenuation and multiple scattering at weld surface and weld/base metal interface. The various inspection methods using $70^{\circ}$ refracted longitudinal wave, 50/70 tandem transducer, $45^{\circ}\;and\;60^{\circ}$ single shear wave are compared. Experiments on limited specimens applied same condition to nuclear pressure vessels shows that $70^{\circ}$ refracted longitudinal wave method is the best one for the detection of underclad cracks. 50/70 tandem transducer using SPOT(Satellite Pulse Observation Technique) is more effective for underclad crack sizing than other sizing methods.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.355-361
• /
• 2012

This paper presents an experimental study on the detection and location of nonlinear scattering source due to the presence of fatigue crack in a laboratory specimen. The proposed technique is based on a combination of nonlinear elastic wave spectroscopy(NEWS) and time reversal(TR) focusing approach. In order to focus on the nonlinear scattering position due to the fatigue crack, we employed only one transmitting transducer and one receiving transducer, taking advantage of long duration of reception signal that includes multiple linear scattering such as mode conversion and boundary reflections. NEWS technique was then used as a pre-treatment of TR for spatial focusing of reemitted second harmonic signal. The robustness of this approach was demonstrated on a cracked specimen and the nonlinear TR focusing behavior is observed on the crack interface from which the second harmonic signal was originated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.147-152
• /
• 1997

This paper presents a method for measuring and analyzing strains in sheet metal forming by stereo vision system. A better understanding and evaluation of the formability can be achieved by analyzing stain distribution in deformed sheet metals. By means of image processing technique, it is possible to get strain distribution efficiently. For measuring strain automatically and accurately, algorithms for camera calibration, grid detection, stereo matching and strain analysis has been developed and verified by experiments with GUI(Graphic User Interface).

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1602-1605
• /
• 2002

Communication schemes are currently changing from circuit switched towards packet switched. These changes enable access to Internet and multimedia services in wireless network. Provision of real-time IP services in air interface introduces relatively large overhead in RTP/UDP/IP headers. To reduce the overhead, the header compression schemes are required. There exist two header compression schemes (CRTP, ROHC) which are IETF standards. We propose Context-ID detection method which reduces more efficiently the packet loss rate than two existing schemes. Its performance in WCDMA system environment is evaluated for CRTP and ROHC schemes.