• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.5
• /
• pp.85-96
• /
• 2003

The Revised Universal Soil Loss Equation (RUSLE) has been used in over 100 countries to estimate potential long-term soil erosion from the field. However, the RUSLE estimated soil erosion cannot be used to estimate the sediment delivered to the stream networks. For an effective erosion control, it is necessary to compute sediment delivery ratio (SDR) for watershed and sediment yield at watershed outlet. Thus, the Sediment Assessment Tool for Effective Erosion Control (SATEEC) was developed in this study to compute the sediment yield at any point in the watershed. To compute spatially distributed sediment yield map, the RUSLE was first integrated with the ArcView GIS and three area based sediment delivery ratio methods were incorporated in the SATEEC. The SATEEC was applied to the Bangdong watershed, Chuncheon, Gangwon Province to demonstrate how it can be used to estimate soil loss and sediment yield for a watershed. The sediment yield using USDA SDR method is 8,544 ton/year and 4,949 ton/year with the method by Boyce. Thus, use of watershed specific SDR is highly recommended when comparing the estimated sediment yield with the measured sediment data. The SATEEC was applied with hypothetical cropping scenario and it was found that the SATEEC can be used to assess the impacts of different management on the sediment delivered to the stream networks and to find the sediment source areas for a reach of interest. The SATEEC is an efficient tool to find the best erosion control practices with its easy-to-use interface.

• Archives of design research
• /
• v.6 no.1
• /
• pp.47-72
• /
• 1993

Nowadays conmpetltlOn of developing new products is getting keen. We can notice that the role and importance of design are emphasized more than ever.The main cause of this tendency is that technical power is no more a factor which secures the superiority in products competition, as technology is gneneralized in the world. Therefore, design is recognized intensely as a competitive strategy to promote competitive power of products. It is an already known fact that the design for both rational function and charming form to satisfy consumer's desires is a short cut to success, when a company develops a new product to promote competitive power in market. The design which plays a leading role in the activity of developing more cnovenient, more economical and more aesthetic products is called 'Competitive Edge' or 'New Corporate Weapon'. Judging form each company's case of developing products, we can guess that it has its own plan and process of developing new products with defferdnl interest and effort. The strategy of developing products is considered as the most important factor that affects the very existence of rhe company. This thesis is composed of six chapters in all. In the firstchapter, I describe the purpose, method, and scope of study.The second chapter includes the image of form in oil fan heater market in nearby Japan and that of interior in our domestic home and shops, and the trend of word life cycle by analyzing circumstances. The third chapter focuses on consumer's attitude. In the fourth chapter, I compare and test current products of competitive companies including Samsung, Daewoo, Shinilwith those of Gold STar. The trend of products, technique, and design which resulted form this comparison is described. In the fifth chapter I explain the strategy, and process of design of oil fan heater in 1992. The last conclusive chapter presents the major point drawed form the case study, but not includes an estimation of products and the condition of market. In this thesis, I reconsider the general understanding of design and designing process and the value of design as a main factor in the strategy of management by investigating the development of products and the strategy of design, and the process of design.

• Journal of Biomedical Engineering Research
• /
• v.28 no.1
• /
• pp.95-101
• /
• 2007

Recently, small-animal imaging technology has been rapidly developed for longitudinal screening of laboratory animals such as mice and rats. One of newly developed imaging modalities for small animals is an x-ray micro-CT (computed tomography). We have developed two types of x-ray micro-CT systems for small animal imaging. Both systems use flat-panel x-ray detectors and micro-focus x-ray sources to obtain high spatial resolution of $10{\mu}m$. In spite of the relatively large field-of-view (FOV) of flat-panel detectors, the spatial resolution in the whole-body imaging of rats should be sacrificed down to the order of $100{\mu}m$ due to the limited number of x-ray detector pixels. Though the spatial resolution of cone-beam CTs can be improved by moving an object toward an x-ray source, the FOV should be reduced and the object size is also limited. To overcome the limitation of the object size and resolution, we introduce zoom-in micro-tomography for high-resolution imaging of a local region-of-interest (ROI) inside a large object. For zoom-in imaging, we use two kinds of projection data in combination, one from a full FOV scan of the whole object and the other from a limited FOV scan of the ROI. Both of our micro-CT systems have zoom-in micro-tomography capability. One of both is a micro-CT system with a fixed gantry mounted with an x-ray source and a detector. An imaged object is laid on a rotating table between a source and a detector. The other micro-CT system has a rotating gantry with a fixed object table, which makes whole scans without rotating an object. In this paper, we report the results of in vivo small animal study using the developed micro-CTs.

• The Journal of the Korea Contents Association
• /
• v.14 no.8
• /
• pp.517-527
• /
• 2014

Universities are increasing every year, supporting the university's teaching and learning center, among subjects which recently retake a good teaching or the most memorable teaching through an essay competitions. This contributed to the development of students' academic skills taught a good teaching know-how to identify and spread the 'good teaching' what has provided opportunity to look back. This study analyzed the characteristics of good teaching, as perceived by Junior College students. We did content analysis to elicit the characteristics of professor from qualitative comments of 75 college essay competitions. According to the content analysis, the most essential characteristics of good teaching as perceived by Junior College students are the following: 1. the professor's enthusiasm for teaching; 2. students' interest for teaching; 3. providing clear explanation; 4. caring professors; 5. good communication with students; 6. sharing professor's experiences.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.69
• /
• pp.407-426
• /
• 2016

The Marine Insurance Act 1906 (MIA 1906) has been a successful piece of legislation, having rarely been amended and having established, or served as an influence in the development of, the basis of marine insurance legislation in several countries. However, it has been recognised that some parts of the MIA 1906 have begun to show their antiquated nature, especially where established principles which were once thought to reflect undoubted propositions of law are now being openly criticised. Since 2006, the Law Commission and Scottish Law Commission (the 'Law Commissions') have been engaged in a major review of insurance contract law, finally leading to the Insurance Act 2015. The Insurance Act 2015 received Royal Assent on 12 February 2015, and was based primarily on the joint recommendations of the Law Commissions. The 2015 Act made substantial changes to several main areas of marine insurance law & practice: (i) the replacement of the pre-contractual duty of disclosure with a duty to make a "fair presentation of the risk"; (ii) the abolition of the "insurance warranty" under the Marine Insurance Act 1906, s.33, and provision of a new default remedy of suspension of liability until the breach is cured; (iii) partial codification of the fraudulent claims rule in insurance contract law, etc. The Act did not provide for any new statutory duty for insurers to investigate or pay claims in a timely fashion, although this may be revisited in the next Parliament. Moreover, the Law Commissions have reopened their consideration of the doctrine of insurable interest. The 2015Actmay not then signal the end of the legislative programme in this area.

• Korean Management Science Review
• /
• v.19 no.2
• /
• pp.221-235
• /
• 2002

Many people are getting more and more interested in the value of information sharing in a supply chain in proportion to the development of information technology in these days. In spite of much interest in the value of shared information, the related studies concluded that the effect of only sharing information strategy between upper and lower level is not large However, many related companies want to link each channel members in the supply chain with on-line to expect to reduce the cost by means of information sharing. This study wants to evaluate the alternative strategy to reduce more related costs than only sharing information strategy. This paper analyzed that how much the total supply chain cost is to change in the case of a transfer of decision rights from the lower (retailers) to the upper level (depot, vendor) in a supply chain. The decision rights mean the rights of being able to decide when to order, how much to order, where to order, and what mode to transport or distribute, etc. in a supply chain. By the experimental simulation study to the simple case, the strategy to share only information took the low effect of 1～2%, but the strategy to transfer the decision lights from the lower to the upper member had larger effect of about 5%. However. for the strategies to work well, it needs to cooperate closely among each supply chain members, and the fruits from the transfer of decision rights in a supply chain are allocated to each chain members reasonably Therefore, there needs to study in the future not only the exact transfer effect of decision rights, but the reasonable allocation method of the fruits among the chain members.

• Microbiology and Biotechnology Letters
• /
• v.29 no.1
• /
• pp.1-11
• /
• 2001

Lactic acid bacteria (LAB) are widely used for various food fermentation. With the recent advances in modern biotechnology, a variety of bio-products with the high economic values have been produced using microorganisms. For molecular cloning and expression studies on the gene of interest, E. coli has been widely used mainly because vector systems are fully developed. Most plasmid vectors currently used for E, coli carry antibiotic-resistant markers. As it is generally believed that the antibiotic resistance markers are potentially transferred to other bacteria, application of the plasmid vectors carrying antibiotic resistance genes as selection markers should be avoided, especially for human consump-tion. By contrast, as LAB have some desirable traits such that the they are GRAS(generally recognized as safe), able to secrete gene products out of cell, and their low protease activities, they are regarded as an ideal organism for the genetic manipulation, including cloning and expression of homologous and heterologous genes. However, the vec-tor systems established for LAB are stil insufficient to over-produce gene products, stably, limiting the use of these organisms for industrial applications. For a past decade, the two popular plasmid vectors, pAM$\beta$1 of Streptococcus faecalis and pGK12 theB. subtilis-E. coli shuttle vector derived from pWV01 of Lactococcus lactis ssp. cremoris wg 2, were most widely used to construct efficient chimeric vectors to be stably maintained in many industrial strains of LAB. Currently, non-antibiotic markers such as nisin resistance($Nis^{r}$ ) are explored for selecting recombi-nant clone. In addition, a gene encoding S-layer protein, slp/A, on bacterial cell wall was successfully recombined with the proper LAB vectors LAB vectors for excretion of the heterologous gene product from LAB Many food-grade host vec-tor systems were successfully developed, which allowed stable integration of multiple plasmid copies in the vec-mosome of LAB. More recently, an integration vector system based on the site-specific integration apparatus of temperate lactococcal bacteriophage, containing the integrase gene(int) and phage attachment site(attP), was pub-lished. In conclusion, when various vector system, which are maintain stably and expressed strongly in LAB, are developed, lost of such food products as enzymes, pharmaceuticals, bioactive food ingredients for human consump-tion would be produced at a full scale in LAB.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.317-325
• /
• 2001

For heuristic purposes, the relative ratio of urease contents inside and outside cells was surveyed using nine ureB+ strains of Helicobacter pylori. the ratio of the enzyme specific activity appeared to vary greatly between the various H. pylori strains, ranging from 0.5 to 2.5. Besides the above compartment, urease was also richly found in the membrane fraction, especially in either peripheral or integral form. The urease distribution across the H. pylori membrane was significantly influenced by the ambient pH; the specific activity of external urease was highest at pH 5.5 with a narrow plateau, whereas the internal specific activity was highest within a pH range of 4.5 to 6.5 with a broad plateau. These finding strongly suggest that H. pylori urease is secretory and responded to the external pH. However, at pH 4.0 or below, no urease activity was detected in either the internal or external compartment, although an increase in the color development with 2,4,6-trinitrobenzene sulfonate (TNBS) was observed. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) demonstrated that these phenomena may be related to a specific proteolysis in certain proteins, including urease or ${\gamma}$-glutamyl transpeptidase. Interestingly, the effect of ammonium ions n alleviating the enzyme inactivation inside the H. pylori cells was remarkably similar to that of D-glucose. In addition, it would appear that the cation acted as a surrogate of not only $Na^+$ but also $K^+$ thereby increasing the H. pylori P-type ATPase activity. This is of great interest, as it implies that the urease action in H. pylori is indispensible at any locus.

• Steel and Composite Structures
• /
• v.36 no.2
• /
• pp.213-228
• /
• 2020

Shape Memory Alloys (SMAs) are new materials used in various fields of science and engineering, one of which is civil engineering. Owing to their distinguished capabilities such as super elasticity, energy dissipation, and tolerating cyclic deformations, these materials have been of interest to engineers. On the other hand, the connections of a steel structure are of paramount importance because of their vulnerabilities during an earthquake. Therefore, it is indispensable to find approaches to augment the efficiency and safety of the connection. This research investigates the behavior of steel connections with extended end plates equipped hybridly with 8 rows of high strength bolts as well as Nitinol superelastic SMA bolts. The connections are studied using component method in dual form. In this method, the components affecting the connections behavior, such as beam flange, beam web, column web, extended end plate, and bolts are considered as parallel and series springs according to the Euro-Code3. Then, the nonlinear force- displacement response of the connection is presented in the form of moment-rotation curve. The results obtained from this survey demonstrate that the connection has ductility, in addition to its high strength, due to high ductility of SMA bolts.

• Cartoon and Animation Studies
• /
• s.11
• /
• pp.41-53
• /
• 2007

Due to the development of digital cinema, Animations are no longer a peripheral part of movies and become major role in making films, including live action movies. This kind of change makes the distinctive line between animations and live action movies vague. In order to prevent such side-effect, this study is aimed at building solid territory again between the two by reviewing the difference and, based on it, looking for effective cinematic techniques to produce synthesized and digitalized images. First of all, consideration on mise-en-scene is crucially required to tell this line. The mise-en-scene is a director's own unique style in making films. In other words, it is a symbol expressed by him/her. With the mise-en-scene, competitive directors explore huge possibility of image expression and know how to use it audiences can understand. Therefore, I look into a set of studies on the mise-en-scene and methodological problems because it is thought that the mise-en-scene is an important element to distinguish way of expression in animations, live action movies and digital cinema. In addition, owing to these fundamental differences, both movies have their own limitation on representation even though they imitate it each other. Synthesized images produced by both representation may not overcome that limitation and even worse bring up the lack of expression and the increase on unfamiliarity, which reduce audiences' interest. But ironically speaking, digital cinema accept each representation. And it serves as hindrance to narrative's delivery not to balance each of it. Therefore, digital cinema that integrate animations and live action movies should keep an eye on the overuse of images and pursue balanced mise-en-scene.