• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.1
• /
• pp.12-18
• /
• 2014

In this paper, a new peak-to-average power ratio (PAPR) reduction method for spatial modulation(SM) is presented. By using the matrix with all non-zero elements to precode the signals before transmitting, the transmit power is scattered over all transmit antennas for achieving the goal of PAPR reduction. If this matrix is also an unitary matrix, the distribution of transmit power over transmit antennas will be uniform and it also could retain the characteristic of avoiding inter channel interference (ICI) due to the orthogonality of unitary matrix. In case of a non-ideal amplifier, the proposed method can produce a considerable improvement that increases with a number of transmit antennas in performance. Furthermore, the new scheme achieves an identical performance with conventional one in the case of ideal amplifier.

• Journal of electromagnetic engineering and science
• /
• v.4 no.2
• /
• pp.56-62
• /
• 2004

We present a multi-Gbit/s digital I/O interface based on RF-modulation and capacitive-coupling over an impedance matched transmission line. The RF-interconnect(RFI) can greatly reduce the digital switching noise and eliminate the dc power dissipation over the channel. It also enables reduced signal amplitude(as low as 200 ㎷) with enhanced data rate and affordable circuit overhead. This paper addresses the system advantages and implementation issues of RFI. A prototype on-chip RFI transceiver is implemented in 0.18-${\mu}{\textrm}{m}$ CMOS. It demonstrates a maximum data rate of 2.2 Gbit/s via 10.5-㎓ RF-modulation. The RFI can be very instrumental for future high-speed inter- and intra-ULSI data links.

• Journal of Broadcast Engineering
• /
• v.20 no.6
• /
• pp.837-847
• /
• 2015

In this paper, the reception performance of spatial modulation multiple-output multiple-input (MIMO) is analyzed for high speed terrestrial broadcasting. The MIMO scheme is required to reduce the inter symbol interference (ISI) and spatial correlation. The spatial modulation scheme solves the problem of ISI, but the spatial correlation degrades the reception performance of SM scheme. The space-time block coded spatial modulation (STBC-SM) is combined the SM system with space-time block code (STBC) for reducing the effects of the spatial correlation. However, the STBC-SM scheme degrades the spectral efficiency by transmitting same data in the two symbol period. The double space-time transmit diversity with spatial modulation (DSTTD-SM) scheme transmits the data with full antenna combination. To adapt these SM MIMO systems into the terrestrial broadcasting system, the reception performance is analyzed using computer simulation in SUI channel environments.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.24-30
• /
• 2008

In this paper, Digital MultiTone(DMT) is an emerging multi-carrier modulation scheme, which has been adopted for VDSL(Very high speed Digital Subscribe Line). A problem of DMT is its sensitivity to frequency offset between the transmitted and received carrier frequencies. This frequency offset introduces inter-carrier interference(ICI) in the DMT symbol. This paper is proposed an ICI cancelation scheme using Kalman Filtering. The performance of the proposed method is compared with conventional methods in terms of bit error rate performance, bandwidth efficiency, and computational complexity. Through simulations, it is shown that for high values of the frequency offset and for higher order modulation schemes, the EKF(Enhanced Kalman Filtering) method perform better than the others.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.88-93
• /
• 2006

In this paper, smaller load has been used compared with the conventional Doherty amplifier and PBG structure have been employed to suppress IMD (Inter-modulation Distortion) and improve PAE (Power Added Efficiency). And The PBG structure has been employed on the output macthing network of Doherty amplifier. The proposed power amplifier has been improved more the IMD3 by 5.5 dBc, and the average PAE by $5\%,$ at peak output power, $18\%$ at 8dB back-off point respectively than the conventional Doherty power amplifier.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.564-566
• /
• 2005

The relation between HPA (High Power Amplifier) and COMS (Communication Ocean Meteorological Satellite) multi-carrier is analyzed in this paper. MODAC (Meteorological and Ocean Data Application Center) has a primary mission to transmit processed data, HRIT (High Rate Information Transmission) and LRIT (Low Rate Information Transmission), which is normalized and calibrated by pre-processing. It is also replaced with the SOC (Satellite Operation Center) in emergency case and can transmit the command and ranging tones for operation of COMS. From the result of simulation with modelled HPA, it is found that the multi-carrier in one HPA can give rise to an inter-modulation which makes harmonic and spurious elements increase in-band. Under the environment of these increased parasitic elements, the degradation of multi-carrier's quality is estimated from the ratio of the amount of noise to total output power of HPA.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.456-458
• /
• 2006

Power line communication: PLC which easy to install at anywhere near outlet for electric machine. PLC uses transmission line for voltage of which is 60 Hz. Signals don't affect to electric machine in PLC because they are very small voltage. One of the important thing is the processes of adding signal to power line and extracting the signal from power line, the other is to choose the strong modulation method which sends signals long distance without loosing in PLC channel. but PLC channel have very high and variable noise and attenuation and then it is very hard to transmit optimally between the transmitter and the receiver. After all, impedance and noise problems of PLC channel must be overcame. Noises of 2 kinds which are AWGN abd impulse noise and attenuation are orated. To overcome the noise. Recently, Multi-carrier Modulation: MCM methods like as OFDM and DMT which are divide the channel into many sub-channel have been studied. those are powerful communication methods in PLC. In this paper, PLC channels made up of 3 numbers of noise and attenuation are simulated for getting BER by Matlab simulink.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.739-743
• /
• 2013

In this paper, a two-dimensional (2-D) channel code for magnetic patterned media is proposed. Patterned media records an information bit on a magnetized dot. Since the space between adjacent tracks is narrow in order to increase the storage density, inter-track interference (ITI) and inter-symbol interference (ISI) can be problems. The amplitude of a bit signal can be corrupted by the 2-D ISI. The signal of the bit surrounded by the same value can be especially destructive, i.e. when its value is the same as the values of the eight surrounding bits. The proposed modulation coding scheme improves the decoding performance of patterned media by preventing this worst case and provides a better code rate than conventional channel codes.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.91-97
• /
• 2004

This paper presents the development of InGaAsP multiple quantum well asymmetric Fabry-Perot modulators(AFPM), which have a vertical structure and high performance and describes measurements of devices operating at 10GHz for next generation broadband wireless communication applications such as picocell systems. Advantages of the AFPM include low drive voltage, which is less than -2V, and -3dB coupling loss, good flatness of the frequency response and simple fiber alignment. A simple link demonstration has been introduced, resulting in 92dB/Hz spurious free dynamic range and 40dB inter-modulation distortion. This modulator could be use for broadband radio over fiber systems such as picocell and multiple RF links.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.12-17
• /
• 2016

In the holographic data storage system (HDSS), the data regarding the volume of a storage medium are recorded and read by the page, and the transmission rate and storage capacity can be increased because of two-dimensional, page-oriented data processing; furthermore, the multi-level HDSS can store more than one bit per pixel. For this same reason, however, and unlike conventional data-storage systems, the HDSS is hampered by two-dimensional (2D) intersymbol interference (ISI) and interpage interference (IPI). Progress regarding the published papers on 2D ISI, which is more severe in the multi-level HDSS, continues; however, mitigation of both 2D ISI and IPI in terms of the multi-level HDSS has not yet been studied. In this paper, we therefore propose a 4-level balanced-modulation code that simultaneously mitigates 2D ISI and IPI.