• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.2
• /
• pp.103-108
• /
• 2006

Microstructural evolution of Pt-aluminide coated Ni-based superalloy has been investigated with ductilization heat treatment. The Pt coat was prepared on the superalloy and then aluminide coating was conducted using a pack cementation process. Samples were heat-treated at $1050^{\circ}C$ for 2 hrs and the microstructure and element analysis were preformed. A various precipitated compounds were observed within the coating layer and the diffusion region in the Pt-aluminide coating and heat treatment, indicating that the bi-phase compounds of $PtAl_2$ and NiAl were performed during the Pt-aluminide coating, whereas $M_{23}C_6$, MC, $Ni_3Al$ and ${\sigma}$ phases were precipitated in the inter-diffusion region. The bi-phase compounds of $PtAl_2$ and NiAl were transformed into the single phase compound of $PtAl_2$ with the heat treatment, increasing the amount of carbide and ${\sigma}$ phase.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.648-655
• /
• 2007

Nowadays, to realize ubiquitous computing environment, many research activities have been going on within various kinds of research domains including automatic identification sensor network, home network, telematics and so on. Especially, RFID middleware that supports the aggregation of RFID tag data, control and management, and the integration with legacy systems has recently gained a lot of attention. Meanwhile, EPCglobal defined an ALE(Application Level Events) standard specification, which exists between RFID readers and applications, and substitutes the previous systems called Savant. In the specification internal structures and implementation technologies of ALE are not mentioned and only external interfaces are defined. This approach easies the verification of standard compliance and inter-operability of the layer. In this paper, we present the design of ALE-compliant RFID middleware systems that process RFID tag data efficiently.

• Structural Engineering and Mechanics
• /
• v.82 no.6
• /
• pp.735-745
• /
• 2022

The suspension thyristor valve can generate tremendous vertical acceleration responses in layers and large tension forces in hangers. A shaking table test of a scaled-down model of thyristor valves suspended on a hall building is performed to qualify the risk of vertical uplift of two representative types of valves, the chain valve and the rigid valve. Besides, an analytical model is established to investigate the source of the slackening of hangers. The test results show that the valves frequently experience a large vertical acceleration response. The soft spring joint can significantly reduce acceleration, but is still unable to prevent vertical uplift of the chain valve. The analytical model shows a stiffer roof and inter-story connection both contribute to a higher risk of vertical uplift for a rigid valve. In addition, the planar eccentricity and short hangers, which result in torsional motion of the valve, increase the possibility of vertical uplift for a chain valve. Therefore, spring joints with additional viscous dampers and symmetric layout in each layer are recommended for the rigid and chain valve, respectively, to prevent the uplift of valves.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.3
• /
• pp.66-77
• /
• 2022

Digitization and automation technologies have rapidly maximized productivity and efficiency in all industries over the past few decades. Construction automation technology has either stagnated over the same period or has not kept pace with overall economic productivity. According to the research studies up to now, the output of concrete structures using coarse aggregates (8mm or more) is very limited due to the limitations of equipment and materials. In this study, information on the development process of 3DCP equipment that can print concrete structures with the printing width (100 mm or more) and printing thickness (30 mm or more) using a 3DCP material mixed with coarse aggregate (8 mm or more) is provided. To verify the performance of the developed 3DCP equipment, experimental data are provided on output variables, the number of layers, and the inter-layer printing time interval. The evaluation and verification data of various mechanical properties (compressive and splitting tensile strength) of printed materials using coarse aggregates are provided.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.9
• /
• pp.2419-2435
• /
• 2023

Command and control networks(C2N) exhibit evident multi-network interdependencies owing to their complex hierarchical associations, interleaved communication links, and dynamic network changes. However, the existing command and control networks do not consider the effects of dependent nodes on the load distribution. Thus, we proposed a command and control networks load allocation strategy based on interdependence strength. First, a new measure of interdependence strength was proposed based on the edge betweenness, which was followed by proposing the inter-layer load allocation strategy based on the interdependence strength. Eventually, the simulation experiments of the aforementioned strategy were designed to analyze the network invulnerability with different initial load capacity parameters, allocation model parameters, and allocation strategies. The simulation indicates that the strategy proposed in this study improved the node survival rate of the interdependent command and control networks model and successfully prevented cascade failures.

• Korean Journal of Poultry Science
• /
• v.10 no.2
• /
• pp.113-121
• /
• 1983

In an effort to understand epizootiological aspects of infectious laryngotracheitis (ILT), a total of 56 chicken flocks in six farms comprised of 35 broiler breeder, 13 commercial layer and 6 layer breeder flocks. were investigated. The farms experienced ILT during the period of one year from June, 1982. In most farms the birds were vaccinated against ILT just before or after the disease outbreak. In two of the farms in which ILT broke out in winter, it was possible to contain the disease in only one or two fleets without transmitting it to the remaining 5 to 7 flocks in the farms by adopting strict isolation procedures for the affected flocks. In regarding inter- flock spreading speed, it took an average of 6 days for flocks rearing on floor and 11 days for those in cages. Among the flecks in rearing cages. transmission among laying flocks was much faster. taking an average of 8 days, compared to non-laying flocks of 17 days, suggesting spreading of the disease by means of egg trays or egg collection process. Peak mortality was observed between 5 and 10 days after from the time of appearance of first dead birds from the disease and the period of mortality, with an average of 18 days, was not influenced by rearing systems, breeds and age of birds. Mortalities in the affected flocks ranged from lo/e to 19.8%, with an average of 6.5 %, and was also not influenced by the above variables except significantly lower mortality in immature broiler breeder flocks (2.9%) compared to immature layer (11.8%) and mature broiler breeder flocks (6.9%). In one breeder farm in which all the birds were kept on floor and ILT broke out in summer, mortality in male birds in all seven flocks of 37 weeks of age or older was as high as twice of that in female birds in the same flocks. This trend was not observed in one 31 weeks old flock and was reversed in another 14 weeks old flock in the farm.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.42-51
• /
• 2016

We investigated the distribution of dissolved nutrients, phytoplankton community structure and utilization of nitrogen compounds by dominant species in the southwestern part of East Sea in September, 2014. Dissolved inorganic nitrogen (DIN) and dissolved inorganic phosphorus (DIP) were lower in the surface layer, and concentrations were increased with depth. Dissolved organic nitrogen (DON) and dissolved organic phosphorus were the opposite of dissolved inorganic nutrients. Although DIN DIP ratio in all of the water masses was higher than Redfield ratio (16), DIN : DIP ratio in mixed layer was about 2, indicating that inorganic nitrogen is the limiting factor for the growth of phytoplankton. In particular, DON proportion in dissolved total nitrogen was about 88 % in the mixed layer where inorganic nitrogen is limiting factor. The dominant species Chaeotceros debilis and Prorocentrum minimum were able to grow using DIN as well as DON such as urea and amino acids. Therefore, DON utilization of phytoplankton may play a role as a survival strategy in the DIN-limited conditions of East Sea.

• Journal of the Korean Magnetics Society
• /
• v.11 no.2
• /
• pp.72-77
• /
• 2001

Top spin valve films with PtMn antiferromagnetic layers were deposited using a multi-target dc magnetron sputtering in (100)Si substrates overcoated with 500 $\AA$ of Al$_2$O$_3$. Firstly, the post-deposition annealing was performed at 270$\^{C}$ in a unidirectional magnetic field of 3 kOe to induce the crystallographic transformation of the PtMn layer from a fcc (111) to a fct (111) structure. Secondly, the spin valve films were annealed without magnetic fields and magnetic properties were measured. In Si/A1$_2$O$_3$ (500$\AA$)/Ta(50$\AA$)NiFe(40$\AA$)/CoFe(17$\AA$)/Cu(28$\AA$)/CoFe (30$\AA$)PtMn(200$\AA$)Ta(50$\AA$) top spin valve samples, the MR ratio decreased slowly with increasing annealing temperature up to 325$\^{C}$. But above 325$\^{C}$, the MR ratio decreased rapidly to 1%, due to a collapse of the exchange coupling between a antiferromagnetic layer and a pinned layer with increasing annealing temperature. Also above 325$\^{C}$, the exchange biased field rapidly decreased and the interlayer coupling field rapidly increased with increasing annealing temperature. A change in the interlayer coupling field was resulted from the increase in interface roughness due to Mn-interdiffusion through the grain boundaries. We confirmed the temperature in changing magnetic properties agreed well with the blocking temperature of PtMn based spin valve structure.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.501-515
• /
• 2008

Recently, as users' requests for high quality mobile multimedia services are rapidly increasing and additional bandwidth can be provided by adopting the hierarchical modulation transmission technology, the research on the Advanced Terrestrial DMB (AT-DMB) service using the SVC (Scalable Video Coding) scheme is being actively studied. But, in order to realize a compatible video service and to accelerate the successful standardization and commercialization, it is necessary to simplify the compatible encoder structure. In this parer, we propose a fast mode decision method by constraining the redundant coding modes in the spatial scalable encoder that keeps the current T-DMB video in base layer. The proposed method is based on the statistical characteristics of each coding mode at both base and enhancement layers, inter-layer predictions, which are derived by investigating macroblock-layer coding modes of the spatial scalable encoder's functional structure. Through computer simulations, it is shown that a simplified encoder model that reduces the heavy computational burden can be found, while keeping the objective visual quality very high.

• Korean Journal of Ichthyology
• /
• v.32 no.3
• /
• pp.148-159
• /
• 2020

This study investigated the seasonal and inter-annual changes in vertical distribution and size spectrum of walleye pollock, Gadus chalcogrammus inhabiting middle eastern coast of Korea (hear after pollock). Pollock was distributed between 50 m and 600 m depth range, and body size (total length) ranged from 16.6 cm to 81.5 cm. The trends of population body size were increased in autumn and winter and decreased in spring and summer. Vertical distribution of pollock showned depth-dependent patterns with distributing smaller individuals mainly in the upper layer (shallower depth), while larger fish in deeper habitats. Those patterns in vertical distribution of pollock population is probably due to be the results of energy-saving strategy, metabolic effects, and changes in prey selections according to pollock growth, derived from spatial and temporal changes in oceanic condition in habitat grounds. When water temperature in upper layer were increased and that of below thermocline depth became decreased in 2017, the ratio of smaller (<35 cm) and larger (≥35 cm) individuals was biased toward larger fishes, extending their distribution into shallow depth, and consequently main fishing ground was formed in far from coastal area. In addition, the ratio of smaller individual distributing between 100~300 m was increased with decreasing temperature gradient between below thermocline and bottom layer. Changes in spatial and temporal distributions of pollock population likely be related with vertical and horizontal changes in oceanic conditions and, consequently food supplies.