• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.245-248
• /
• 1997

The control modes used in teleoperation are position control mode, and rate control mode. This paper presents the problems of the conventional control modes, through simulation, proposes an intelligent mixed control mode that converts the operation mode between the position mode and the rate mode intelligently by judging the operator's intention using the real-time measurement data. The effectiveness of the proposed intelligent mixed control mode is demonstrated and compared to other typical control modes through simulation and actual experiment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.205-212
• /
• 1997

In this study, active vibration control for a flexible cantilever beam was performed by using the intelligent control technique. The intelligent control method which integrating the back propagation algorithm and the fuzzy inference technique was proposed and its performance was examined. The proposed control algorithm for the flexible cantilever beam was verified via computer simulation of active vibration control. Furthermore, the control system and its efficiency were investigated via experiments on active vibration control by the intelligent control technique without a digital signal processing device.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.101-104
• /
• 2008

This paper is a report of designing for LED lights driver unit. The main purpose of driver designing is high electrical efficient performance and intelligent control LED driver. This LED driver can be used for intelligent light control. This product expects to improve the light control by dimming instead of interlace on/off light control that increases the social cost such as car accidents and etc.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.491-492
• /
• 2008

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.980-985
• /
• 1988

In this paper, a control system of the PUMA 560 robot manipulator using a PC (Personal Computer) is presented. The hardware of the designed control system is composed of IBM-PC/AT, interface board, selection board, interrupt generating circuit, and the servo control unit of the PUMA controller. A robot control library is developed using assembly and C language, and is composed of several low-level functions and arm interface routines, world model routines, arm kinematics routines, and motion command service routines. Using the designed library, joint interpolated motion and Cartesian interpolated motion of the PUMA robot manipulator are realized. In the future, our system is expected to be a very helpful basis and a useful tool for developing various control algorithms of robot manipulator using sensory information.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.915-927
• /
• 2008

Networked control systems(NCSs) have gained increasing attention in recent years due to their advantages and potential applications. The network Quality-of-Service(QoS) in NCSs always fluctuates due to changes of the traffic load and available network resources. To handle the network QoS variations problem, this paper presents an intelligent scheduling control method for NCSs, where the sampling period and the control parameters are simultaneously scheduled to compensate the effect of QoS variation on NCSs performance. For NCSs with network-induced delays and packet dropouts, a discrete-time switch model is proposed. By defining a sampling-period-dependent Lyapunov function and a common quadratic Lyapunov function, the stability conditions are derived for NCSs in terms of linear matrix inequalities(LMIs). Based on the obtained stability conditions, the corresponding controller design problem is solved and the performance optimization problem is also investigated. Simulation results are given to demonstrate the effectiveness of the proposed approaches.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.198-203
• /
• 2008

An Intelligent optimal control system design algorithm in active suspension equipment adopting linear matrix inequalities control system design theory with representing by descriptor system form is presented. The validity of the linear matrix inequalities intelligent decentralized control system design with representing by descriptor system form in active suspension system through the numerical examples is also investigated.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.658-662
• /
• 1998

A pulse frequency modulation control method for single-switch three-phase buck rectifiers is comprehensively studied in this paper. The proposed pulse frequency control method leads the three-phase buck rectifier to high performance system that can draw the nearly sinusoidal imput-line currents. The simulated and experimental results demonstrate that the system provides low total harmonic distortion of the input-line currents, high-power factor, and good output voltage regulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.20-25
• /
• 1998

This paper proposes a new compliant contact control strategy for the robot manipulators accidentally interacting with an unknown environment. The main features of the proposed method are summarized as follows: First, each entry in the diagonal stiffness matrix corresponding to the task coordinate in Cartesian space is adaptively adjusted during con-tact along the corresponding axis based on the contact force with its environment. Second, it can be used for both unconstrained and constrained motions without any switching mechanism which often causes undesirable instability and/or vibrational motion of the end effector. Third, the adjusted stiffness gains are automatically recovered to initially specified stiffness gains when the task is changed from constrained motion to unconstrained motion. The simulation results show the effectiveness of the proposed method by employing a two-link direct drive manipulator interacting with an unknown environment.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3159-3161
• /
• 1999

This paper aims at developing remote control system to control and monitor distributed various devices through internet or information communication network. SNMP (Simple Network Management Protocol) and UPS (Uninterruptible Power Supply) are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time, Java-environment software is constructed. Also, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232 and RS-485 is used between controller and applied device.