• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.45-50
• /
• 2004

The field utilization factor (equation omitted) (the mean electric field / the maximum electric field) of standard sphere gaps was calculated by the charge simulation method, taking into account the ground plane and shanks. n changes mainly with g/r and slightly with 1$_1$, 1$_2$ and 1, where D=2r is the sphere diameter, g is the gap length, 1$_1$ and 1$_2$, respectively, are the lengths of the upper and lower shank, and t is the shank diameter. Generally, (equation omitted) increases as 1$_1$,1$_2$ and t each becomes larger. IEC standard 60052(2002) limits t$\leq$0.2D 1$_1$$\geq$1D and prescribes A=1$_2$＋D＋g where A is the height of the spark point on the upper sphere. Therefore, (equation omitted) is the largest when A=9D and the smallest when A=3D. The simple equation of a straight line, (equation omitted)=1- (g/3r), can generally be used as a representative value of (equation omitted) for a wide variety of sphere diameters that are permitted by the IEC standard. The maximum electric field E$_{m}$ at sparkover of standard air gaps has also been calculated by the relation E$_{m}$=V/(equation omitted)g). E$_{m}$ describes a U-curve for g/r, up to the sphere diameter of 1 m. Moreover, for 1.5-m and 2-m diameters and especially .for negative polarity, sparkover voltages have been calculated by integration of the ionization index.index.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권4호
• /
• pp.499-509
• /
• 2008

Foxo1 plays an important role in the integration of hormone-activated signaling pathways with the complex transcriptional cascade that promotes preadipocyte differentiation of clonal cell lines from rodents. We isolated the full-length cDNA of porcine FoxO1 gene using RACE, confirmed by visual Northern blotting. The deduced amino acids indicated 94% and 90% identities with the corresponding human and mice aa. Analysis of the aa sequence, showed that it included a Forkhead domain (aa 167-247), a transmembrane structure domain (aa 90-113), a LXXLL motif (aa 469-473), and 51 Ser, 8 Thr, and 4 Tyr phosphorylation sites, indicating a potential important role for FoxO1 transcriptional activity in vivo. Using the IMpRH panel, we mapped FoxO1 gene to chromosome 11p13. Our data provide basic molecular information useful for the further investigation on the function of FoxO1 gene. Time-course analysis of FoxO1 expressions indicated that levels of mRNA and protein gradually increased from day 0 to 3, and it reached almost maximal level at day 3, then decreased from day 5 to 7 in porcine primary preadipocyte differentiation. After induction by IGF-1, GPDH activity and accumulation of lipid increased, however, expressions of FoxO1 mRNA and protein were inhibited in a dose dependent manner. These results suggest that FoxO1 takes part in porcine preadipocyte differentiation and expressions of FoxO1 were regulated by IGF-1.

• 제어로봇시스템학회논문지
• /
• 제17권1호
• /
• pp.61-67
• /
• 2011

The GPS new civil signal is modulated on the L2 carrier at a frequency of 1227.6MHz. The L2C signal is composed of two multiplexed code signals, which include CM code with a 10,230 chip sequency repeating every 20ms, and CL code which has a 767,250 chip sequency repeating every 1.5 seconds. Thus, the new civil signal have much improved cross correlation properties so that the position fixing can be possible even with very weak signals. However, it requires very long acquisition time because of its long code length. This paper presents an efficient signal acquisition method for L2C AGPS receiver. Snapshot mode and coarse time assistance are assumed and total integration time is given by 1.5 sec. By SNR worksheet and computer simulation, it is proven that L2C signal can be acquired with very weak power less than -150dBm. Considering the acquisition time and the sensitivity, it is recommended that the highest power signal is acquired with CM code first to reduce TTFF. By the timing synchronization, at this time, search space of the code phase for other signals can be greatly reduced so that CL code can be used in signal acquisition to maximize sensitivity with small computation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.361.1-361.1
• /
• 2016

Due to their high sensitivity, fast response, small energy consumption and ease of integration, nanoelectromechanical systems (NEMS) have attracted much interest in various applications such as high speed memory devices, energy harvesting devices, frequency tunable RF receivers, and ultra sensitive mass sensors. Since the device performance of NEMS is closely related with the mechanical and flexural properties of the material in NEMS, analysis of the mechanical and flexural properties such as intrinsic tensile stress and Young's modulus is a crucial factor for designing the NEMS structures. In the present work, the intrinsic mechanical properties of highly stressed silicon nitride (SiN) beams are investigated as a function of the beam length using two different techniques: (i) dynamic flexural measurement using optical interferometry and (ii) quasi-static flexural measurement using atomic force microscopy. The reliability of the results is analysed by comparing the results from the two different measurement techniques. In addition, the mass density, Young's modulus and internal stress of the SiN beams are estimated by combining the techniques, and the prospect of SiN based NEMS for application in high sensitive mass sensors is discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.52-52
• /
• 2009

To date, chalcogenide alloy such as $Ge_2Sb_2Te_5$(GST) have not only been rigorously studied for use in Phase Change Random Access Memory(PRAM) applications, but also temperature gap to make different states is not enough to apply to device between amorphous and crystalline state. In this study, we have investigated a new system of phase change media based on the In-Sb-Te(IST) ternary alloys for PRAM. IST chalcogenide thin films were prepared in trench structure (aspect ratio 5:1 of length=500nm, width=100nm) using Tri methyl Indium $(In(CH_3)_4$), $Sb(iPr)_3$ $(Sb(C_3H_7)_3)$ and $Te(iPr)_2(Te(C_3H_7)_2)$ precursors. MOCVD process is very powerful system to deposit in ultra integrated device like 100nm scaled trench structure. And IST materials for PRAM can be grown at low deposition temperature below $200^{\circ}C$ in comparison with GST materials. Although Melting temperature of 1ST materials was $\sim 630^{\circ}C$ like GST, Crystalline temperature of them was ~$290^{\circ}C$; one of GST were $130^{\circ}C$. In-Sb-Te materials will be good candidate materials for PRAM applications. And MOCVD system is powerful for applying ultra scale integration cell.

• 수산해양기술연구
• /
• 제30권4호
• /
• pp.251-262
• /
• 1994

The speed of vertical migration and the volume backscattering strength of the scattering layers during the evening and morning transitions between day and night were measured in November 1990-1992 in thermally stratified waters of the East China Sea. Acoustical measurements were carried out using a scientific echo-sounder operating at t재 frequencies of 25 and 100kHz, and using an echo-integration system connected with a micro-computer. Biological sampling was accomplished by bottom trawling to identify fish species recorded on the echo sounder, and the species and length compositions were determined. The values of scattering strength were allocated to group of fishes according to the fish traces on the echo recording paper and the species composition of trawl catches. The vertical velocities of migration derived from the changes in the depths and the values of peak scattering strength of the dense layer vertically migrating toward the bottom or toward the surface. The trawl data suggest that snailfish and fishing frog were the most abundant fishes in all research stations. As sunrise approached, the fish formed a strong concentration just above the thermocline. The the highest values of scattering strength in the entire water column appeared in the depth strata above the thermocline just before the begining of downward migration. As soon as the fish began to migrate downwards across the thermocline, the values of the scattering strength in the depth strata above the thermocline rapidly decreased, while the values for the scattering layer moving slowly toward the bottom gradually increased. During the 1992 surveys, the speed of the vertical migration was estimated to be 0.38m/min in the upward migration and 0.32m/min in the downward migration, respectively. That is the rate of vertical migration was slightly higher at dusk than at dawn. Similar migration patterns were observed on different stations and under different weather conditions during the surveys in 1990.

• 한국항공우주학회지
• /
• 제41권4호
• /
• pp.275-283
• /
• 2013

본 논문에서는 유전자 알고리즘을 이용한 복합재 로터 블레이드 단면 구조 최적설계방법에 대한 연구를 수행하였다. 반복적인 최적설계 계산을 위해 자동격자생성 프로그램을 개발하였으며, VABS를 이용해 로터 블레이드 단면에 대한 응력해석을 수행하였다. 로터 블레이드 최소질량을 목적함수로 정의하였으며, 응력 파손지수와 단면 질량중심 그리고 단위 길이 당 블레이드 최소질량을 구속조건으로 설정하였다. 최종적으로 본 논문의 복합재 로터 블레이드 단면 구조 최적설계방법을 통해서 스킨 적층각 및 스킨 두께 그리고 토션박스 두께, 토션박스 위치, 토션박스 폭과 같은 블레이드 단면 설계변수들이 결정되었다.

• Journal of Plant Biotechnology
• /
• 제44권4호
• /
• pp.388-393
• /
• 2017

We report an Agrobacterium-mediated transformation procedure optimized for 'Kyoho' that is a major table grapevine cultivar in Korea, and its transgenic plants with antifreeze protein gene of carrot (DcAFP). The full length of DcAFP coding region in accordance with the previous report was isolated from young leaves of carrot and recombined into a plant transformation vector. Ethylene inhibitors such as silver nitrate and aminoethoxyvinylglycin (AVG) supplemented in a co-cultivation medium distinctly increased frequency of shoot regeneration when explants were sub-cultured in a selection medium: particularly ten-fold higher in treatment with 0.1 mg/L AVG than one without ethylene inhibitor. Among various antibiotics and their concentrations, the combination of 150 mg/L cefotaxime plus 150 mg/L $Clavamox^{TM}$ was selected for elimination of Agrobacterium cells in addition to minimization of adverse effect on shoot regeneration, while 50 mg/L kanamycin monosulfate effectively suppressed regeneration of non-transgenic shoots. Applying the elucidated culture condition, we finally obtained a total of 5 transgenic 'Kyoho' plantlets with DcAFP, of which integration with the grapevine genome and transcription was confirmed by nucleic acid analyses.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1995년도 제9회 식물생명공학 심포지움 식물육종과 분자생물학의 만남 The 9th Plant Biotechnology Symposium -Breeding and Molecular Biology-
• /
• pp.57-86
• /
• 1995

Molecular mapping of plant genomes has progressed rapidly since Bostein et al.(1980) introduced the idea of constructing linkage maps of human genome based on restriction fragment length polymorphism (RFLP) markers. In recent years, the development of protein and DNA markers has stimulated interest for the new approaches to plant improvement. While classical maps based on morphological mutant markers have provided important insights into the plant genetics and cytology, the molecular maps based on molecular markers have a number of inherent advatages over classical genetic maps for the applications in genetic studies and/or breeding schemes. Isozymes and DNA markers are numerous, discrete, non-deleterious, codominant, and almost entirely free of environmental and epistatic interactions. For these reasons, they are widely used in constructing detailed linkage maps in a number of plant species. Plant breeders improve crops by selecting plants with desirable phenotypes. However a plant's phenotyes is often under genetic control, positioning at different "quantitative trait loci" (QTLs) together with environmental effects. Molecular maps provide a possible way to determine the effect of the individual gene that combines to produce a quantitative trait because the segregation of a large number of markers can be followed in a single genetic cross. Using market-assisted selection, plants that contain several favorable genes for the trait and do not contain unfavourable segments can be obtained during early breeding processes. Providing molecular maps are available, valuable data relevant to the taxonomic relationships and chromosome evolution can be accumulated by comparative mapping and also the structural relationships between linkage map and physical map can be identified by cDNA sequencing. After constructing high density maps, it will be possible to clone genes, whose products are unknown, such as semidwarf and disease resistance genes. However, much attention has to be paid to level-up the basic knowledge of genetics, physiology, biochemistry, plant pathology, entomology, microbiology, and so on. It must also be kept in mind that scientists in various fields will have to make another take off by intensive cooperation together for early integration and utilization of these newly emerging high-techs in practical breeding. breeding.

• 한국정보통신학회논문지
• /
• 제16권4호
• /
• pp.793-798
• /
• 2012

본 연구에서는 이중게이트(Double Gate; DG) MOSFET에서 채널 내 도핑분포 및 채널구조에 따른 문턱전압이하 전류의존성을 분석하고자 한다. 전위분포를 구하기 위하여 포아송방정식을 풀 때 전하분포는 가우스분포함수를 이용할 것이며 이의 타당성은 이미 여러 논문에서 입증하였다. 이중게이트 MOSFET는 게이트전압에 의한 전류제어능력의 증가로 단채널 효과를 감소시킬 수 있어 문턱전압이하 특성을 향상시킬 수 있다. 문턱전압이하 영역에서 전류제어는 고집적회로에서 소비전력의 감소와 관계된 매우 중요한 요소이다. 게이트전압에 따른 문턱전압이하 전류의 변화를 이용하여 문턱전압의 변화를 정량적으로 분석할 것이다. 문턱전압이하 전류는 채널 내 도핑분포 및 채널크기에 의하여 영향을 받는다. 그러므로 본 연구에서는 채널길이 및 채널두께의 변화가 전류흐름에 미치는 영향을 채널도핑농도, 도핑분포함수 등에 따라 분석할 것이다.