• Journal of Korean Society on Water Environment
• /
• v.25 no.1
• /
• pp.58-68
• /
• 2009

Low impact development (LID) technique is relatively new concept to reduce surface runoff and pollutant loading from land cover by attempting to match predevelopment condition with various integrated management practices (IMPs). In this study, computational model for designing and evaluating LID, named LIDMOD, was developed based on SCS-CN method and applied at Andong bus terminal to evaluate LID applicapability and design retention/detention area for volume or peak flow control. LIDMOD simulated with 21 years simulation period that yearly surface runoff by post-development without LID was significantly higher than that with LID showing about 2.8 times and LID could reduce efficiently yearly surface runoff with 75% reduction of increased runoff by conventional post development. LIDMOD designed detention area for volume/peak flow control with 20.2% of total area by hybrid design. LID can also efficiently reduce pollutant load from land cover. Pollutant loads from post-development without LID was much higher than those from pre-development with showing 37 times for BOD, 2 times for TN, and 9 times for TP. Pollutant loads from post-development with LID represented about 57% of those without LID. Increasing groundwater recharge reducing cooling and heating fee, creating green refuge at building area can be considered as additional benefits of LID. At the point of reducing runoff and pollutant load, LID might be important technique for Korean TMDL and LIDMOD can be useful tool to calculate unit load for the case of LID application.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.105-115
• /
• 2012

This study paid attention to the possibility of broadcasting contents as a learning resource, which promoted the knowledge composition and the process of creation from the software having enriched contents not a delivering tool for the information in one direction. and tried to implement it thru e-PBL, which is one of teaching-learning models in e-learning. In order to implement the possibility of broadcasting contents in the e-PBL enviroment as a learning resource, the study focused on the design and development of e-PBL based on the broadcasting contents and found out the educational possibility for the broadcasting contents as the learning resource in e-PBL enviroment. This study focused on the design of learning module and development process which integrated strategic plans to maximize the utilization of broadcasting contents including development of online learning community. Also, This is verified by applying the learning module was to prove a differentiation.

• Architectural research
• /
• v.4 no.1
• /
• pp.7-16
• /
• 2002

In order to examine theoretical underpinnings of preference for built forms, 129 subjects are asked to rate a series of 9 slides of residential houses depicting a wide range of architectural styles on a 5 point scale, for coherence, complexity, excitement, familiarity, and natural harmony, respectively. Based on Lee's (2002a, 2002b) two previous studies addressing the issue of aesthetic beauty evaluation for man-made creatures (e.g., residential housing scenes), this study summarizes several meaningful findings. As reported by all the subjects, first, both "desire to visit" and "desire to live in" turned out to be a good predictor of preference as the two measures are highly correlated in statistically significant levels (99.9%). People who desire to visit a spot are more likely to desire to live in it. Second, Pearson's correlations showed that coherence is the opposite end of complexity. The more likely a housing setting is hanging together, the less likely it looks to be complex. Overall, though, it is not clear that the two variables work directly in that way, as weighted on preference ratings. That is, coherence and complexity are likely to be totally two independent systems that affect the ratings of preference. Third, both excitement and environmental sensitivity (e.g., harmony of a house with its surrounding nature) most highly account for the preference for various housing scenes, while familiarity has only a little effect on preference ratings. Possibly, people like or dislike a visual thing, no matter how much they are familiar with it. Finally, this study suggested that design professionals could communicate effectively with their clients if sets of visual standards as an appropriate communication tool for better design are properly established.

• Nuclear Engineering and Technology
• /
• v.43 no.2
• /
• pp.187-194
• /
• 2011

Korea Nuclear Fuel is developing the X-GEN fuel which shows high performance and robust reliability for the worldwide supply. However, the simplified code systems such as CESEC-III which were developed in 1970s are still used in the current Non-LOCA safety analysis of OPR1000 and APR1400 plants. Therefore, it is essential to secure an advanced safety analysis methodology to make the best use of the merits of X-GEN fuel. To accomplish this purpose, the $\b{i}$ntegrated $\b{s}$afety $\b{a}$nalysis $\b{m}$ethodology (iSAM), is developed by selecting the best-estimate thermal-hydraulic code RETRAN. iSAM possesses remarkable advantages, such as generality, integrity, and designer-friendly features. That is, iSAM can be applied to both OPR1000 and APR1400 plants and uses only one computer code, RETRAN, in the whole scope of the non-LOCA safety analyses. Also the iSAM adopts the unique and automatic initialization and run tool, $\b{a}$utomatic $\b{s}$teady-$\b{s}$tate $\b{i}$nitialization and $\b{s}$afety analysis too l (ASSIST), to enable unhandy designers to use the new design code RETRAN without difficulty. In this paper, a brief overview of the iSAM is given, and the results of applying the iSAM to typical non-LOCA transients being checked during the reload design are reported. The typical non-LOCA transients selected are the single control element assembly withdrawal (SCEAW) accident, the asymmetric steam generator transients (ASGT), the locked rotor (LR) accident, and bank CEA withdrawal (BCEAW) event. Comparison to current licensing results shows a close resemblance; thus, it reveals that the iSAM can be applied to the non-LOCA safety analysis of OPR1000 and APR1400 plants.

• The Journal of Korean Association of Computer Education
• /
• v.6 no.3
• /
• pp.99-108
• /
• 2003

This paper indicates limitations of the existing VOD(Video on Demand)-based on-line education systems and presents the design and implementation of Education on Demand (EOD) system as an alternative. EOD system is based on meta information expressed in XML and component technology. Overall system consists of authoring tool. contents server, learning policy system and contents viewer. which are utilized throughout the learning contents life-cycle. EOD system enables automated contents management using meta information exchange methodology that is conformant to the SCORM meta data presentation scheme. In addition, integrated management of interaction and feedback information along with the learning policy system provides customized learning guide for each individual learner. With the development of EOD system, this paper discusses about advanced on-line education system which surpasses existing content-providing-only systems.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.1018-1023
• /
• 2012

Smartphone is integrated into the daily lives of all types of people not even young generation. A touch screen display is a primary input device of a smart phone, a tablet computer, etc. While there are many tough technologies in existence, resistive and capacitive are dominant and currently lead the touch screen panel industry. And a capacitive touch screen panel widely used in smart phones is coated with a material that stores electrical charges. In this study, we tried to manufacture gloves produced with electro-conducting leather as a tool to operate a touch panel screen. Therefore, electrically conductive materials, Polyaniline(PANI), Poly(3,4-ethylenedioxythiophene) (PEDOT), and Carbon nanotubes (CNT) were applied to the surface of leather to be used as a touching operator for capacitive touch screen panel. The leather samples were treated by simple painting method; firstly, they were painted with aqueous solution containing each of the electrically conductive materials and then dried. This cycle was repeated three times. Consequently, the treated leather samples showed electrical conductivity and reasonable working performance to the capacitive touch screen. And, PANI showed the best performance and highest electrical conductivity, and then PEDOT and, CNT in decreasing order. This is because the solubilities of PANI and PEDOT show higher than dispersibility of CNT. Thus, the concentration of conducting polymers was greater than that of CNT in the treating solutions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.194-200
• /
• 2003

In this paper, FSK(Frequency Shift Keying) demodulator which is widely used for FH-SS system is designed and the experimental results are analyzed. The performance of the ADPLL(All-digital Phase-Locked-Loop), which is the main part of the demodulator circuit, is analyzed by the computer program. Using Maxplus-II tool provided by altera. co., ltd, each part of the ADPLL is designed and all of them is integrated into EPM7064SLC44-10 chip. And the simulation results are compared with the characteristics of the implemented circuits for analysis. There is about 2${\mu}\textrm{s}$ difference in time constant of the PLL. This difference is not critical in the demodulator. And the experimental results show that the transmitted data is well demodulated when the phase difference between the FSK modulated signal and the reference signal is about 180 degree.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.205-210
• /
• 2006

Nowaday manufacture technology and manufacture environment are changing rapidly. By development of computer and enlargement of technique, most of manufacture field are computerized. It is measured automatically do much quality characteristics thereby and great many data happen in a day. corporations is important if have gotten fast information that are useful from wide data to go first in international competition according to these change. Statistical process control(SPC) techniques are used as a problem solution tool at manufacturing process until present. However, this statistical methods is not applied more extensively because have much restrictions in realistic problem. In this paper, wish to develop more realistic and scientific new statistical design techniques doing to integrate data mining(DM) and statistical methods by the alternative to cope these problem. First step selects significant factor using DM techniques from datas of manufacturing process including much factors and second step wish to find optimum of process after get the estimated response function through response surf ace methodology(RSM) that is statistical techniques.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.561-568
• /
• 1994

A man model can be used as an effective tool to design ergonomically sound products and workplaces, and subsequently evaluate them properly. For a man model to be truly useful, it must be integrated with a posture prediction model which should be capable of representing the human arm reach posture in the context of equipments and workspaces. Since the human movement possesses redundant degrees of freedom, accurate representation or prediction of human movement was known to be a difficult problem. To solve this redundancy problem, a psychophysical cost function was suggested in this study which defines a cost value for each joint movement angle. The psychophysical cost function developed integrates the psychophysical discomfort of joints and the joint range availability concept which has been used for redundant arm manipulation in robotics to predict the arm reach posture. To properly predict an arm reach posture, an arm reach posture prediction model was then developed in which a posture configuration that provides the minimum total cost is chosen. The predictivity of the psychophysical cost function was compared with that of the biomechanical cost function which is based on the minimization of joint torque. Here, the human body is regarded as a two-dimensional multi-link system which consists of four links ; trunk, upper arm, lower arm and hand. Real reach postures were photographed from the subjects and were compared to the postures predicted by the model. Results showed that the postures predicted by the psychophysical cost function closely simulated human reach postures and the predictivity was more accurate than that by the biomechanical cost function.

• Journal of the Korea Society for Simulation
• /
• v.3 no.1
• /
• pp.151-165
• /
• 1994

Broadband network based on the Asynchronous Transfer Mode(ATM) concept are becoming the target technology for the emerging Broadband Integrated Services Digital Network(B-ISDN). Since B-ISDN is very complex and requites a great amount of investment, optimum design and performance analysis of such systems are very important. Simulation can be widely used to analyze and examine the broadband network behavior. However, for the complicated system like broadband networks it is extremely difficult and time-consuming to develop a complete model for simulation. In this paper, an object-oriented modeling approach for the broadband network simulation is presented for the effective and efficient modeling. Object-oriented approaches can provide a good structuring capability for complicated simulation models and facilitate the development of reusable and extensible simulation models. We have developed an object-oriented model which consists of object model and behavior model. In the object mode., the components of the broadband network and both constant bit rate(CBR) and variable bit rate(VBR) traffic types of call level, burst level, and cell level are modeled as object classes. In the behavior model, the dynamic features for each object class are represented using the state transition diagram. It has been shown by illustration that objectoriented modeling is an effective tool for modeling the complicated B-ISDN.