• 제목/요약/키워드: integrated cell number

검색결과 71건 처리시간 0.023초

지리정보시스템을 이용한 장기유출모형의 개발(I) -장기유출의 격자 모형화- (Development of a Cell-based Long-term Hydrologic Model Using Geographic Information System(I) -Cell-based Long-term Hydrologic Modeling-)

  • 최진용;정하우
    • 한국농공학회지
    • /
    • 제39권1호
    • /
    • pp.64-74
    • /
    • 1997
  • A CELTHYM(CEll-based Long-term HYdrologic Model), a pre-processor and a post-processor that can be integrated with geographic information system(GIS) were developed to predict the stream flow from the small agricultural watershed on the daily basis. The CELTHYM calculates the direct runoff from a grid using SCS curve number method and then sum up all of cells with respect to a sub-catchment area belonged to a stream grid and integrated to an outlet. Base flow of a watershed outlet was computed by integrating of the base flow of each stream grid that was averaged the sub-catchment deep-percolation and calculated with the release rate. Two kind of water budget equation were used to compute the water balance in a grid that was classified into not paddy field and paddy field. One of the two equation is a soil water balance equation to account the soil moisture of the upland, forest and excluding paddy field grid. The other is a paddy water balance equation for the paddy field, calculating the ponding depth, the effective rainfall, the deep percolation and the evapotranspiration.

  • PDF

Microfluidic Devices for Cell Analysis

  • Bachman, Mark;Li, G.P.
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2009년도 추계학술발표대회
    • /
    • pp.3.2-3.2
    • /
    • 2009
  • Microfluidics and BioMEMStechnology has increasingly been used as a tool for studying small volumes oftissue and even individual cells. One of the most important benefits ofmicrofluidic technology is the potential to build devices that analyze and sortmammalian cells. The "sorting problem" typically requires that a fewcells be selected and isolated from a larger population of hundreds, thousandsor even millions of other cells. For example, cancer tumor cells may resideamong a large population of healthy cells, but it would be of great interest toidentify, isolate and study only the cancer cells. In another application, onemay want to determine the number of white blood cells within a sample of blood.We have developed microfluidic devices that enable researchers to select cellsfrom a population by a variety of methods, including antibody staining,dielectrophoretic selection, and physical size selection. These devices haveapplications in cancer research where cancer cells must be identified fromnormal tissue, but where only small samples of tissue are available. In thistalk, we will present some of our microfluidic cell sorting devices, discusstheir physical principles, and their use in biological applications.

  • PDF

A PETRI NET-BASED CELL CONTROLLER FOR A FLEXIBLE MANUFACTURING SYSTEM

  • Janssens, Gerrit-K.;Tabucanon, Mario-T.
    • Management Science and Financial Engineering
    • /
    • 제3권1호
    • /
    • pp.15-38
    • /
    • 1997
  • In a flexible manufacturing system, a cell controller is able to identify and evaluate a number of alternative decisions to meet the objectives set by the factory level controller. In this paper, a Petri net-based cell controller is presented to accomplish this task. A static model is developed by using the Integrated Computer Aided Definition(IDEF0) method to represent clear functional relationships among the objects of the system. Based on the static model, two Petri net models are developed for the physical part flow and for the information flow. Multiple decision alternatives are generated from the physical part flow model and are synchronized with the information flow model for execution of the selected alternative.

  • PDF

광 입사각이 BIPV에 적용되는 단결정 또는 비정질 실리콘 태양전지의 양자효율에 미치는 영향 (Incident Angle Dependence of Quantum Efficiency in c-Si Solar Cell or a-Si Thin Film Solar Cell in BIPV System)

  • 강정욱;손찬희;조광섭;유진혁;김정식;박창균;차성덕;권기청
    • 한국진공학회지
    • /
    • 제21권1호
    • /
    • pp.62-68
    • /
    • 2012
  • 건재 일체형 태양광발전(BIPV) 응용을 위해 광 입사각에 따른 태양전지의 변환 효율은 중요하다. 양자효율은 태양전지의 파장별 전자 수집효율을 말하며, 입사각별 양자효율 측정으로 입사각에 따른 태양전지 출력 변화 요인을 분석할 수 있다. 이러한 입사각별 양자효율은 태양전지 종류에 따라 차이를 보인다. 본 연구에서는 가장 많이 쓰이는 벌크형 단결정 실리콘 태양전지와 박막형 비정질 실리콘 태양전지의 입사각별 양자효율을 비교하였다. 그 결과, 단결정 실리콘 태양전지에서는 광 입사각이 증가함에 따라 전 파장영역에서 양자효율이 감소했다. 반면, 비정질 박막 실리콘 태양전지에서는 단파장 영역에서는 결정질 실리콘과 동일하게 감소하였으나, 그 이후의 흡수 영역에서 약 $40^{\circ}$의 입사각까지 증가 또는 일정한 양자효율을 보이다가 이후에 급격히 감소하는 결과를 얻었다. 이는 비정질 박막 실리콘 태양전지에서 입사각이 증가함에 따라 특정 파장 영역에서 산란과 박막 구조의 영향으로 예상된다. 따라서, 태양전지의 구조 및 광학 구조 최적화 등으로 BIPV 적용에 유리한 구조 태양전지 제작이 가능할 것으로 보인다.

An Improved Phase-Shifted Carrier Pulse Width Modulation Based on the Artificial Bee Colony Algorithm for Cascaded H-Bridge Multilevel Inverters

  • Cai, Xinjian;Wu, Zhenxing;Li, Quanfeng;Wang, Shuxiu
    • Journal of Power Electronics
    • /
    • 제16권2호
    • /
    • pp.512-521
    • /
    • 2016
  • Cascaded H-bridge multilevel (CHBML) inverters usually include a large number of isolated dc-voltage sources. Some faults in the dc-voltage sources result in unequal cell dc voltages. Unfortunately, the conventional phase-shifted carrier (PSC) PWM method that is widely used for CHBML inverters cannot eliminate low frequency sideband harmonics when the cell dc voltages are not equal. This paper analyzes the principle of sideband harmonic elimination, and proposes an improved PSCPWM that can eliminate low frequency sideband harmonics under the condition of unequal dc voltages. In order to calculate the carrier phases, it is necessary to solve transcendental equations for low frequency sideband harmonic elimination. Therefore, an approach based on the artificial bee colony (ABC) algorithm is presented in this paper. The proposed PSCPWM method enhances the reliability of CHBML inverters. The proposed PSCPWM is not limited to CHBML inverters. It can also be applied to other types of multilevel inverters. Simulation and experimental result obtained from a prototype CHBML inverter verify the theoretical analysis and the achievements made in this paper.

스테레오 비전을 위한 고성능 VLSI 구조 (High-Performance VLSI Architecture for Stereo Vision)

  • 서영호;김동욱
    • 방송공학회논문지
    • /
    • 제18권5호
    • /
    • pp.669-679
    • /
    • 2013
  • 본 논문에서는 실시간으로 스테레오 정합을 수행하기 위한 VLSI(Very Large Scale Integrated Circuit)구조를 제안한다. 스테레오 정합의 연산을 분석하여 중간 연산 결과를 재사용하여 연산량과 메모리 접근수를 최소화한다. 이러한 동작을 수행할 수 있는 스테레오 정합 연산 셀의 구조를 제안하고, 이를 병렬적으로 확장하여 탐색 범위 내의 모든 비용함수를 동시에 연산할 수 있는 하드웨어의 구조를 제안한다. 이러한 하드웨어 구조를 확장하여 2차원 영역에 대한 비용함수를 연산할 수 있는 하드웨어의 구조와 동작을 제안한다. 구현한 하드웨어는 FPGA(Field Programmable Gate Array) 환경에서 최소 250Mhz의 클록 주파수에서 동작이 가능하고, 64화소의 탐색범위를 적용한 경우에 $640{\times}480$ 스테레오 영상을 약 805fps의 성능으로 처리할 수 있다.

Hybrid 가드채널이 있는 이동통신시스템이 성능 평가 (Performance Analysis of a Cellular Mobile Communication System with Hybrid Guard Channels)

  • 홍성조;최진영
    • 산업경영시스템학회지
    • /
    • 제29권4호
    • /
    • pp.100-106
    • /
    • 2006
  • We analyze a voice/data integrated traffic model of the cellular mobile communication system with hybrid guard channels for voice and handoff calls. In a multi-service integrated wireless environment, quality of service guarantee is crucial for smooth transportation of real time information. Real time voice traffic requires a guaranteed upper bounded on both delay and packet error rate, whereas data traffic does not. Voice traffic has high transmission priority over data packets. Thus one of the important problems is the design of admission control schemes which can efficiently accommodate the differential quality of service requirements. In this paper, a hybrid guard channel scheme is considered in which arriving calls are assigned channels as long as the number of busy channels in the cell is below a predetermined first threshold. When the number of busy channels reaches the first threshold, new originating data calls are queued in the infinite data buffer. Then reaches second threshold, only handoff calls are assigned the remaining channels and new originating voice calls are blocked. We evaluate the system by a two-dimensional Markov chain approach and generating function method and obtain performance measures included blocking probability and forced termination probability.

Thermal Aware Buffer Insertion in the Early Stage of Physical Designs

  • Kim, Jaehwan;Ahn, Byung-Gyu;Kim, Minbeom;Chong, Jongwha
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제12권4호
    • /
    • pp.397-404
    • /
    • 2012
  • Thermal generation by power dissipation of the highly integrated System on Chip (SoC) device is irregularly distributed on the intra chip. It leads to thermal increment of the each thermally different region and effects on the propagation timing; consequently, the timing violation occurs due to the misestimated number of buffers. In this paper, the timing budgeting methodology considering thermal variation which contains buffer insertion with wire segmentation is proposed. Thermal aware LUT modeling for cell intrinsic delay is also proposed. Simulation results show the reduction of the worst delay after implementing thermal aware buffer insertion using by proposed wire segmentation up to 33% in contrast to the original buffer insertion. The error rates are measured by SPICE simulation results.

BLOCK LOSS DISTRIBUTION IN AN M/M/1 QUEUE WITH A CELL DISCARDING SCHEME

  • Lee, Gye-Min;Kwag, Min-Kon;Jeon, Jong-Woo;Kim, Chong-Kwon
    • 대한수학회논문집
    • /
    • 제13권3호
    • /
    • pp.635-642
    • /
    • 1998
  • When an integrated communication system is congested, we may reserve some spaces for non-realtime traffic by discarding a part of realtime traffic. That is sensible because realtime traffic is insensitive to a few losses. Several discarding schemes have been developed including Separate Queue (SQ). Under such schemes, the block loss distribution, i.e., the distribution of the number of losses within a given block which consists of successive data of a type, is important. We derive the block loss distribution of the SQ scheme and modifies the SQ scheme with a threshold.

  • PDF

지리정보시스템을 이용한 장기유출모형의 개발(II) -전.후처리 시스템 개발- (Development of a Cell-based Long-term Hydrologic Model Using Geographic Information System(II) - Pre and Post Processor Development -)

  • 최진용;정하우;김대식
    • 한국농공학회지
    • /
    • 제39권2호
    • /
    • pp.103-112
    • /
    • 1997
  • A CELTHYM(CEll-based Long-term HYdrologic Model), a pre-processor and a post-processor that can he integrated with geographic information system(GIS) were developed to predict the stream flow of a small agricultural watershed. Three kinds of routines, that are watershed boundary extraction routine(WBER), curve number calculation routine(CNR) and maximum available soil moisture calculation routine(MASR) composed pre-processor that was nicely interfaced with CELTRYM and GIS. Two kinds of routines, grapher and map composer composed post-processor that was well adapted CELTHYM output to chart making and GIS map making. The developed pre-post processor was useful for the GIS integration and spatial comprehension of the CELTHYM output.

  • PDF