• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.153-163
• /
• 2000

The size effect on fracture toughness was investigated by introducing $J-A_2$ theory. For this application,small size specimens were chosen to establish $J-A_2$ assessment curve with FEM analysis. Two-dimensional FEM analysis was conducted with plane strain model using ABAQUS by domain integral method to calculate both crack tip stress and fracture toughness which were used to establish $J-A_2$ curve. The assessment curve predicted the fracture toughness of large specimens very well when compared to the test values. The results showed good prediction for deep crack specimen, though there were acceptable deviations in shallow cracked specimens, presumably caused by constraint effect. When the curve applied to reactor vessel in order to predict end of life fracture toughness with assumption of on-power pressure test condition, it provided the reasonable pressure compared to the existing design value. Better predictions would be possible if more test data were available.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.621-629
• /
• 1992

본 연구에서는 Kelvin의 기본해와 초기응력 증분에 의해 정식화된 경계적분방 정식을 이용하여 점차적으로 외력을 증가시켰을 때, 선형등방경화재에 국부적으로 생 기는 항복영역과 항복하중, 탄소성 응력해석등을 재료비선형문제로 해석하였다. 이 때 초기응력 증분을 결정함에 있어서 종래에는 등가 소성변형률을 수렴판정으로 해석 하였지만, 이는 구분적인 선형 경화재와 온도 의존성 문제에는 적당하지 않으므로 암 기용일등은 등가응력과 응력-변형률 선도를 이용하여 수렴판정을 하였다. 그러나 이 방법은 소성역에서의 기울기가 변화하는 곳에서는 피할 수 없는 오차가 존재한다. 따라서 여기에서는 계산된 초기응력 증분에 의한 초기 탄성변형률에너지 증분과 응력 -변형률선도로 부터 구해지는 초기 탄성변형률에너지 증분을 이용한 수렴판정으로 초 기응력증분을 결정하였다. 또한, 내부영역적분을 일부 해석적인 적분과 수치적분을 병행한 경우와 전부 수치적분방법으로 내압을 받는 실린더와 단순 인장하중이 작용하 는 양편 Ⅴ형 노치를 갖는 박판의 경우에 적용하여 해석하였으며, 그 결과를 유한요소 법 프로그램인 NISA(numerically integrated elements for system analysis)로 구한 결과치와 비교, 고찰하였다.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.937-946
• /
• 1986

본 논문에서는 이와 같은 점을 고려하여 두께가 얇은 평면응력 상태의 CT 시 험편을 이용하여 W와 z의 변화에 따른 파괴인성치와 J저항곡선의 거동 및 크랙성장을 고려한 J적분식도 검토하였다. 또한, 재료를 변형경화 재료로 가정하고 HRR 응력변 형율장의 특성을 이용하여 컴퓨터 프로그램을 작성하여 J적분을 구한 후 실험치와 상 호 비교 검토하였다. 이 때 사용한 입력자료는 실험치의 그것과 동일하게 하였다.

• 전력전자학회논문지
• /
• 제10권1호
• /
• pp.29-37
• /
• 2005

본 논문에서는 PI형태의 속도제어기를 장착한 고성능 유도전동기의 조건부 적분형 자동 튜닝 anti-windup 기법을 제안한다. 제안된 방법에서는 전동기 운전 조건에 대한 사전 정보 없이도 전동기 토오크 지령의 주파수 해석에 의해서 적분기 온/오프 시점이 결정된다. 따라서, 사용자는 anti-windup 동작을 위한 별도의 제어 상수를 설정하지 않아도 된다. 또한, 동작 조건이 변동하여도 과도 상태의 속도는 항상 최소한의 오버슈우트와 점착시간을 가지도록 동작한다. 본 기법은 속도 및 토오크 응답의 오버슈우트를 허용하지 않는 유도전동기 고성능 응용 분야에 유용하게 적용 될 수 있으며, 기본 개념은 화학 공정이나 산업용 로봇과 같은 일반 산업 응용 분야에도 확대 적용 가능하다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.19-27
• /
• 2009

Globally, customer appreciation and demand for quieter products has driven noise control engineers to develop efficient and quieter products in a relatively short time. In the vehicles and ship industry, noise has become an important attribute because of the competitive market and increasing customer awareness. Noise reduction is often achieved through structural modifications by typical approaches. In the present paper, author describes a fundamental study on optimum design of curvature. Bezier curve. and rib attachment to reduce noise from simple panel using a genetic algorithm(GA). The acoustic optimization procedure employed p-FEM for structural analysis, the Rayleigh integral method for acoustic analysis and the GA for searching optimum design. In the optimization procedure. the objective function to be minimized is the average sound power radiated from an objective structure over a given frequency range $0{\sim}300$ Hz.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.163-169
• /
• 2001

The solution of two-dimensional deflection of circular wavy reinforcing fiber elastics was obtained for one end clamped boundary under concentrated load condition. The fiber was regarded as a linear elastic material. Wavy shape was described as a combination of half-circular arc smoothly connected each other with constant curvature of all the same magnitude and alternative sign. Also load direction was taken into account. As a result, the solution was expressed in terms of a series of elliptic integrals. These elliptic integrals had two different transformed parameters involved with load value and initial radius of curvature. While we found the exact solutions and expressed them in terms of elliptic integrals, the recursive ignition formulae about the displacement and arc length at each segment of circular section were obtained. Algorithm of determining unknown parameters was established and the profile curve of deflected beam was shown in comparison with initial shape.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 춘계 학술논문발표회 논문집
• /
• pp.89-97
• /
• 1998

In this study, under large scale yielding conditions crack propagation is found to governed by parameters based on the J-integral or on the crack opening displacement. But initiation of crack propagation of ductile material seems to be controlled by just on parameter that is the strain. The relationship between the critical value of J-integral and the local fracture strain in uniaxial tensile test in the region of maximum reduction in area. Therefore, the fundamental theorectical equation by the proposed elastic-plastic fracture toughness and the local fracture strain has a merit. in comparison with the ASTM method, which can measure by using the load-displacement curve and the specimens in tenslie test.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.25-33
• /
• 1998

In this study, under large scale yielding conditions crack propagation is found to governed by parameters based on the J-integral or on the crack opening displacement. But initiation of crack propagation of ductile material seems to be controlled by just on parameter that is the strain. The relationship between the critical value of J-integral and the local fracture strain in uniaxial tensile test in the region of maximum reduction in area. Therefore, the fundamental theoretical equation by the proposed elastic-plastic fracture toughness and the local fracture strain has a merit, in comparison with the ASTM method, which can measure by using the load-displacement curve and the specimens in tensile test.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.312-315
• /
• 2004

This paper presents a tuning-free conditional integration anti-windup strategy for induction machine with Proportional-Integral (PI) type speed controller. The on/off condition of integral action is determined by the frequency domain analysis of machine torque command without a prior knowledge of set-point changes. There are no tuning parameters to be selected by users for anti-windup scheme. In addition, the dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time even in the change of operating conditions. This algorithm is useful in many high performance induction machine applications not to allow the oscillation and overshoot of speed/torque responses. The main idea can be extended to general applications such as chemical processes and industrial robots.

• 풍력에너지저널
• /
• 제2권1호
• /
• pp.74-81
• /
• 2011

This paper deals with the application of LQ control to the power curve tracking control of wind turbine. However, two more additional tasks are required to apply the LQR theory to wind turbine control. One is the tracking problem instead of regulation, because the wind turbine is controlled as variable speed and variable pitch. The other is LQ integral control., because the rotor speed should be tightly controlled without any steady state error. Starting from the analysis of wind characteristics, design requirement of a wind turbine control system is defined. A design procedure of LQ tracking with integral control is introduced. The performance of LQ tracking system is analyzed and evaluated by numeric simulation.