• 조명전기설비학회논문지
• /
• 제25권11호
• /
• pp.58-66
• /
• 2011

In this paper, the starting torque and efficiency characteristics of the induction motor (IM) for the electric vehicle (EV) are improved by changing the slot shapes of squirrel cage. The initial model of the induction motor is designed by the loading distribution method (LDM), and then the rotor with squirrel cage of NEMA class A is selected to optimize the slot shape by response surface method(RSM). The design variables of rotor slot shape are obtained by the RSM. Starting torque and efficiency were calculated by the equivalent circuit method. As a result, starting torque and efficiency of the optimized model shows good performance through whole-speed range.

• 조명전기설비학회논문지
• /
• 제28권7호
• /
• pp.55-61
• /
• 2014

This paper presents a method to reduce the stray loss of core Tie-Plate of distribution power transformer. The method combines a 3-dimensional FEM with PSO(Particle Swarm Optimization) algorithm to determine the shape of the Tie-Plate that minimizes eddy current and flux-leakage losses. To verify the method a 24MVA distribution(cast-resin) transformer was simulated using one objective function and two design variables with some constraints. The final optimized Tie-Plate has nine($3{\times}3$) slots of 10mm width, 15mm thickness and 25mm distance. After four iterations, the Tie-Plate loss was reduced to about 21 % of the original.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.47-53
• /
• 2015

IPMSM(Insert Permanent Magnet Synchronous Motor) is a very high degree of freedom in the design according to the permanent magnet insertion position. And the performance of IPMSM is affected a lot on barrier shape which determines the magnetic flux path from magnet. Thus the position of permanent magnet and the barrier shape has to be designed by considering both specification and operation condition. In the paper, the permanent magnet and barrier shape which is suitable for direct drive motor of washing machine has been studied. In addition, in order to verify the validity of the study, the test was evaluated by making a prototype motor.

• 지질공학
• /
• 제31권3호
• /
• pp.321-332
• /
• 2021

최근 새로운 개념의 보강토 옹벽이 많이 개발되고 있으나, 개발된 보강재에서 발생되는 시공과정에서 문제나 붕괴와 같은 문제의 연구는 부족한 실정이다. 이에 본 연구에서는 신장형 띠형 보강재의 형상에 따른 현장 적용성을 인발저항시험과 내시공성시험으로 평가하고자 하였다. 시험체는 일반적인 신장형 띠형 보강재, 돌기가 부착된 개발된 신장형 띠형 보강재, 지오그리드를 절단하여 만든 띠형 보강재를 사용하여, 신장형 띠형 보강재 형상의 차이에 대한 기초적인 연구를 수행하고 각 보강재료의 장단점을 비교하였다. 연구 결과로서 보강재의 형상에 따른 장·단점을 명확하게 가지고 있는 것으로 나타났으며, 보강토 옹벽의 설치 조건과 뒤채움재의 입도를 고려하여 선택한다면 최선의 보강재를 선택할 수 있을 것으로 나타났다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.49-53
• /
• 2009

If you are installing communications cables in the pipeline based on the kind of cable installation tension within the allowed range of the tension must be maintained. The tension of the installation affected by the cable types, cable jacketed status, cross-sectional shape of the pipeline, the substance present in the pipeline, pipeline linear, the direction of the cable is installed. Depending on the size of the cable installation tension fatal influence on the quality of communication, or, at worst, the cable can be cut. In this paper, test bed for building a pipeline and using optical cable and such cable tension was measured. Freedom of access to the pipeline used in the experiment, and installed in conjunction with the cable tension was measured. It possible for the cable installation to determine whether a duplicate, and have compared the actual measured tension value and the theoretical expression.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.345-348
• /
• 2008

In this paper, we investigated a dust pollution and spot survey of electrical installation in vulnerable area. From the survey results, we know that the dust was easily accumulated in cabinet panel because the cabinet panel cover was opened and the management of installation was not good. Although the dust pollution was not difference, the possibility of accident become increased by dust in salt area. Thus, it is necessary to variation of cabinet panel shape to prevention of electrical disaster in dust occurrence and another protection devices.

• 한국측량학회지
• /
• 제34권2호
• /
• pp.161-169
• /
• 2016

This paper is intended to propose a novel approach to select an optimal site for a small-scaled artificial recharge system installation using TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) with geospatial data. TOPSIS is a MCDM (Multi-Criteria Decision Making) method to choose the preferred one of derived alternatives by calculating the relative closeness to an ideal solution. For applying TOPSIS, in the first, the topographic shape representing optimal recovery efficiency is defined based on a hydraulic model experiment, and then an appropriate surface slope is determined for the security of a self-purification capability with DEM (Digital Elevation Model). In the second phase, the candidate areas are extracted from an alluvial map through a morphology operation, because local alluvium with a lengthy and narrow shape could be satisfied with a primary condition for the optimal site. Thirdly, a shape file over all candidate areas was generated and criteria and their values were assigned according to hydrogeologic attributes. Finally, TOPSIS algorithm was applied to a shape file to place the order preference of candidate sites.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.122-131
• /
• 2011

In this paper, the design and analysis of a reconfigurable modular structure, which reforms itself according to the change of the environment and realize appropriate forms and motions, are dealt with. This modular is a free structure from the restrictions with constraints about fixed environment and has various forms and motions by combining units. The form of this unit has a shape of a square with 7 centimeters side each, and has a structure which can be combined in a chain-shape or a lattice-shape. Additionally, The structure has a mobility by being equipped with wheels so that it can be combined for itself. In this paper, all the wireless controllers, sensor system, and communicating method between modules according to module structures were suggested and transformation method to be transformed to shape of snakes, caterpillars were presented. Moreover, simulations for each method were performed to show the validity of the motions including motor torque analysis. All the motions suggested were realized and experimented, whereby the availability of the designed mechanism and algorithm was verified with the result of experiments.

• 조명전기설비학회논문지
• /
• 제19권5호
• /
• pp.1-8
• /
• 2005

대규모 사무소 건물에서 에너지 절약의 방안으로 조광제어시스템이 사용되고 있다. 광센서 조광제어시스템의 효율적인 구축을 위해 광센서의 형상에 관한 고려가 필요하다. 효율적인 광센서의 형상은 사무소 건물 재실의 다양한 변화에 대응하여 초기 설치위치의 변화 없이 유동적으로 작업면의 조도를 측정할 수 있어야 한다. 이 때 광센서 최적의 방향성과 위치를 고려하여 효율적인 광센서 형상이 디자인되어야 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.447-454
• /
• 1999

In this paper, a technique for the shape design and analysis of rail fastener is presented. KRRI's own 3 type fasteners are developed after due consideration for tile aspects of installation, maintenance, and cost of fastener. Numerical by using commercial FEM program COSMOS/Works are carried out to determine the optimal shape of fastener clip. Front tile manufactured models and numerical results, the developed fasteners show tile possibility to be commercialized. But in order to have their competitiveness on the markets, further studies are required for the demonstration of performance through laboratory and field tests