• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.457-462
• /
• 2002

Generally speaking, durability, load carrying capacity and the life of structure becomes to be shortened in all structures as time passed. Also, we have to repair and reinforce because of tile decrease of the traffic volume and overloaded vehicles in the bridge. External prestressing method is most popular and effective strengthening method which can be used for the prestressed concrete-girders. When strengthening with external prestressing method, there are many ways to install anchorage system. But, These methods have many faults. For example, the achorage force is so small or an anchorage system installation damages an existing structure. So, this paper suggested a new anchorage system to strengthen without any damage to the structure and then confirm the increase of durability and the properties of behavior with experimentation.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.325-330
• /
• 2000

A dynamic absorber is used to protect the primary vibration system under the steady-state harmonic disturbance. In a number of cases it appears expedient to install several absorbers of smaller masses instead of one. This may be due to the need of distribute the absorber's response along the construction, restrictions on the absorber's installation. So, we studied characteristics of the primary vibration system for the optimal natural frequency ratio and the optimal damping ratio of serial multi-dynamic absorber. Also we obtained the optimum values of the serial multi-dynamic absorber parameters using computer simulation for the damped primary vibration system. In designing multi-dynamic absorber, we presented for the optimal natural frequency and the optimal damping ratio of multi-dynamic absorbers.

• IE interfaces
• /
• v.1 no.1
• /
• pp.63-72
• /
• 1988

Since many small and medium sized enterprises in Korea have lack of funds to install a commercial computer packages for work standards and work scheduling. This study has been attempted to develop the computer-generated package to ease those problems. The system consisted of three major parts. The first part is a work measurement program applying W.F.(work factor) predetermined time standards for work standards. The second part is a work scheduling program which calculates each operator's machine and job allocation. The last part is a control program for the production outputs and the machine utilization monitoring. The system is programmed by dBASE III for the IBM-PC compatibles for the sake of user's conveniences.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.321-321
• /
• 2010

In this paper, we propose a novel type shaft-less ring type ultrasonic motor. A traveling wave rotary type ultrasonic motor is selected as a base model. The newly designed stator has two piezoelectric ceramic rings which are bonded in sandwich shape as traveling wave generator. So, we can expect to produce higher torque. The proposed model has the rotor structure that coupled with the stator provokes the pressure, this model do not install the separate plate any spring device. We used the finite element method to verify the operation principle and to compute the vibration mode of proposed model.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.51-54
• /
• 2012

This paper aims to design and analyze the stationary fixture type automatic rotary drilling machine and estimate the safety of the machine through simulations. Working conditions of typical rock excavating machines are mostly affected by geographical conditions on the sea, such as by the ebb and flow of the tide or high waves. Due to the size of machines, it is difficult to move and install machines. So it is necessary to develop a machine that not only can be moved and installed more easily also be operated more quickly and automatically. To validate the safety of the designed structure of the machine, static analysis has been carried out. The results of stress and deformation analysises show that the designed machine is stable and safe in hard working condition.

• Journal of Information Technology Services
• /
• v.9 no.3
• /
• pp.107-121
• /
• 2010

In this paper, we present a frequency reassignment problem (FRP) that arises when we install new base stations or reconfigure radio networks to increase the capacity or to expand service area. For this problem, we develop an integer programming (IP) model, and develop cutting planes to enhance the mathematical representation of the model. Also, we devise an effective tabu search algorithm to obtain tight upper bounds within reasonable time bounds. Computational results exhibit that the developed cutting planes are effective for reducing the computing time as well as for increasing lower bounds. Also, the proposed tabu search algorithm finds a feasible solution of good quality within reasonable time bound.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.236-237
• /
• 2021

In the waterproofing of the rooftop of reinforced concrete buildings, it is difficult to solve perfectly according to the proficiency of waterproofing materials, methods, and mechanics. Therefore, this study applies a Tricot Fabric Mesh to the behavior of the bottom concrete. In addition, it responds to the behavior of the concrete cracking, and the waterproofing and protective layer has developed a method to provide convenience for rooftop floor use by adhesion between the base and the waterproof layer with the use of high viscosity urethane to effectively move the surface deformation and surface vapor and install a airvent device on the wall.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.75-83
• /
• 2004

This paper describes the design, fabrication, and measurement of a low side lobe antenna for RSE base station of the ETCS which is one of the ITS services. The antenna is installed on the gantry of road side and provides the wireless communication lint between vehicles and RSE. The required characteristics of ETCS base station antenna are low sidelobe and specific beam pattern by the road and install environment and installed place of OBU. To minimize the affects of multipath signal by reflection, Circular polarization is required. To get low sidelobe of antenna, array configuration and weighting factor by Taylor distribution in radiator elements are applied. The measured results of fabricated antenna are as follows; return loss of 130MHz by -10dB, an axial ratio of 2.6dB, and a gain of 17dBi. It is found that the measured beam patterns are similar to design results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.95-104
• /
• 2004

This paper describes the design, fabrication, and measurement of a omni-directional beam pattern antenna for base station of the BIS which is one of the ITS services. The antenna is installed on the signal lamp of important crossroad and provides the wireless communication link between vehicles and RSE(Road Side Equipment). The required characteristics of BIS base station antenna are omni-directional beam pattern and specific beam pattern by the road and install environment and installed place of OBU. To get omni-directional beam pattern of antenna, Array configuration and OMA are applied. The measured results of fabricated antenna are as follows; return loss of 640MHz by -10 dB, and a gain of 10.3dBi. It is found that the measured beam patterns are similar to design results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2097-2104
• /
• 2009

In terrestrial communications, high data rate transmission can be achieved by splitting the coverage area into small cells through base stations and reusing the resource efficiently. However, the geographical features of maritime communications require the long transmission range, and it is not practical to install base station on the sea to set up the similar deployment as the terrestrial communications, so MF/HF band modem with low data rate are currently utilized for maritime communications. And the expensive satellite communication via Inmarsat is the conventional solution for the high data rate transmission on the sea. To reduce the cost, Ad-hoc network is proposed to apply on the sea, which requires no base station for the peer-to-peer communications. In this paper, we denominate this maritime environment specific Ad-hoc network as Nautical Ad-hoc Network (NANET). Furthermore, the deployment scenario for the NANET, and the analysis on multiple access and duplexing schemes for the NANET are discussed in this paper, which serves as the cornerstone for the further NANET research and development.