• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.223-230
• /
• 2018

This study examines a non-contact laser scanning-based ultrasound system, called an angular scan pulse-echo ultrasonic propagation imager (A-PE-UPI), that uses coincided laser beams for ultrasonic sensing and generation. A laser Doppler vibrometer is used for sensing, while a diode pumped solid state (DPSS) Q-switched laser is used for generation of thermoelastic waves. A high-speed raster scanning of up to 10-kHz is achieved using a galvano-motorized mirror scanner that allows for coincided sensing and for the generation beam to perform two-dimensional scanning without causing any harm to the surface under inspection. This process allows for the visualization of longitudinal wave propagation through-the-thickness. A pulse-echo ultrasonic wave propagation imaging algorithm (PE-UWPI) is used for on-the-fly damage visualization of the structure. The presented system is very effective for high-speed, localized, non-contact, and non-destructive inspection of aerospace structures. The system is tested on an aluminum honeycomb sandwich with disbonds and a carbon fiber-reinforced plastic (CFRP) honeycomb sandwich with a layer overlap. Inspection is performed at a 10-kHz scanning speed that takes 16 seconds to scan a $100{\times}100mm^2$ area with a scan interval of 0.25 mm. Finally, a comparison is presented between angular-scanning and a linear-scanning-based pulse-echo UPI system. The results show that the proposed system can successfully visualize defects in the inspected specimens.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.171-176
• /
• 1999

Nondestructive inspection and accompanying life analysis based on fracture mechanics were the major conventional methods for evaluating remaining life of critical high temperature components in power plants. By using these conventional methods, it has been difficult to perform in-service inspection for life prediction. Also, quantitative damage evaluation due to unexpected abrupt changes in operating temperature was almost impossible. Thus, many efforts have been made for evaluating remaining life during operation of the plants and predicting real-time life usage values based on the shape of structures, operating history, and material properties. In this study, a core software for on-line life monitoring system which carries out real-time life evaluation of a critical component in power boiler(high temperature steam headers) is developed. The software is capable of evaluating creep and fatigue life usage from the real-time stress data calculated by using temperature/stress transfer Green functions derived for the specific headers and by counting transient cycles. The major benefits of the developed software lie in determining future operating schedule, inspection interval, and replacement plan by monitoring real-time life usage based on prior operating history.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.269-272
• /
• 1997

It is need to inspect a injected E.V.A midsole automatically in shoe manufacture. We applied image processing technology to inspect a injected E.V.A midsole. Captured image by CCD camera was processed with smoothing and edge detection. We compensated error of length from processed image of gauge block and error by bending strain with the measurement method of interval length for midsole image.

• 산업경영시스템학회지
• /
• 제18권35호
• /
• pp.115-122
• /
• 1995

This paper is developed with software system for the construction of periodic maintenance. The system includes records of equipment, maintenance work, failure mode analysis and work standards of maintenability, inspection & repair to establish periodic maintenance system. And the software program is designed with user-oriented to analyze maintenance data and maintenance system of periodic interval times. Also machine operator can easily apply maintenance management system in production & manufacturing field. Visual Basic in the environment of Window system is used as computer program language for graphics and data base management in IBM PC.

• 생약학회지
• /
• 제54권2호
• /
• pp.80-87
• /
• 2023

Rancidity changes were examined for 6 herbal medicines, namely Persicae Semen, Armeniacae Semen, Lini Semen, Trichosanthis Semen, Arecae Semen, Myristicae Semen known to have relatively high fat content. In order to reduce rancidity of herbal medicines, samples were stored at 3 different conditions of room, refrigerating and freezing temperatures, and the rancidity was measured for 10 months with every 2 month interval. Fat content was extracted by using ethyl ether, and acid values and peroxide values, which are generally accepted indicators of fat rancidity, were measured. When storing Persicae Semen, Lini Semen and Arecae Semen at room temperature, the acid values increased as the storage period increased, and it was higher than when stored in refrigeration or freezing. The measurement of peroxide value showed more significantly higher initial degree of rancidity when Persicae Semen, Trichosanthis Semen, Arecae Semen and Myristicae Semen were stored at room temperature. It was observed that storing herbal medicines in refrigeration or freezing inhibited their rancidity compared to storing them at room temperature. To investigate the quality changes according to rancidity, the analysis of aflatoxins and indicator components showed that aflatoxins B₁ and B₂ were detected in Armeniacae Semen, Arecae Semen and Myristicae Semen, and the amount of amygdalin was well maintained within the specification standard.

• 핵의학기술
• /
• 제17권2호
• /
• pp.101-106
• /
• 2013

Purpose: As UBC IRMA is being tested, patients out of the reference value are reacting within the value again a few days later the urine collection tested, which causes the reliability of the test to decrease as a result. In this study, we can assume that the physiological changes in the factors would affect the results. The purpose of the study is to find out whether hematuria and proteinuria in the sample as well as the interval time (3 hours or more recommended) have affected the results. As a result, we could discover the changes in factors and increase the reliability of the test. Materials and Methods: 468 people (female: 249, male: 219) who came for the check-up were presented herein for medical examination from 2013.3.15 to 2013.1.2. Some people out of 468 who have reacted onto the reference value were divided into group low titer zone, ow-middle titer zone, and middle-high titer zone and tested for hematuria and proteinuria. During that period, 48 outpatients were asked to fill in a questionnaire regarding the urination interval time. The reagents used were (IDL Biotech AB, Sweden) and UBC IRMA. Results: Of the patients that are formed in the reference value of ($0.1-34.0{\mu}g/L$) turn out to be 52.7 years average age in their low concentration, ($mean{\pm}SD$) of the value of $0.10{\pm}0.02{\mu}g/L$. Among 80 people (50.8%, female: 49.2%), 16 patients (20%) have shown reaction to microscopic hematuria and 10 patients (12.5%) responded to proteinuria. In the average low concentration under 52.5 years of average age, 43 people (53%) have shown reaction to microscopic hematuria and 21 people (26.3%) are proteinuric patients out of 80 patients (male: 50.8%, female: 51.3%). In the middle high concentration of $11.8{\pm}4.82{\mu}g/L$ under the average age 51.7 years, 35 patients (53%) have responded to the microscopic hematuria and proteinuric patients are 26 people (39.3%) out of 66 people (men: 44%, women: 56%). In addition, in the concentration of $51.7{\pm}43.5{\mu}g/L$, some patients who get out of the reference value are observed as the average age of 52.0. 11 patients (78.6%) out of 14 (male: 35.7%, female: 64.3%) react to the microscopic hematuria. There show 6 people (42.8%) who turn out to be as proteinuric patients. As for the interval time, $1.67{\pm}3.71{\mu}g/L$ was the average value among 48 patients (female: 45.8%, male: 54.2%). Conclusion: We cannot see if proteinuria and hematuria directly affect abnormal results of inspection of 8,18 cytokeratin; however, we can find out that they statistically have an influence on highly generating UBC among several mechanisms. Also, although urination interval time was various every 15 minutes, we it does not affect these results.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권4호
• /
• pp.21-29
• /
• 2017

최근 건축물의 보수 보강 및 리모델링시 구조부재를 부착시키거나 고정하는데 있어서 시공의 유연성 및 용이성으로 부착식 후설치 앵커의 사용량이 증가하고 있는 실정이다. 그동안 후설치 앵커중 확장식 앵커시스템에 대한 내력평가는 지난 10년간 실험을 통한 연구가 지속되어 설계기준 제정등 어느정도 정립단계에 있으나 부착식 앵커시스템에 대한 해석 및 실험적 연구는 아직 미비한 실정이다. 따라서 현재 우리나라에서는 설계자와 시공자가 신뢰할 수 있는 명확한 설계기준이 없는 상태로서 외국의 설계기준에 의존하고 있는 실정이다. 본 연구에서는 부착식 케미컬 앵커를 대상으로 연단거리 및 앵커간격 그리고 하중방향에 따른 전단실험을 통하여 무근콘크리트에 매입된 케미컬 앵커의 부착강도에 미치는 영향을 규명하고 합리적인 케미컬 앵커의 설계기준 제정을 위한 기초자료를 제공하는 것을 목적으로 한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.55-63
• /
• 2015

콘크리트용 후설치 세트앵커는 콘크리트가 경화된 후에 설치되는 앵커이며 시공 장비의 발달과 시공의 유연성 및 용이성으로 사용량이 증가하고 있는 실정이다. 전단하중을 받는 앵커는 강재 파괴, 콘크리트 파열파괴, 콘크리트 프라이아웃 파괴 등의 대표적인 파괴모드를 보인다. 본 연구에서는 매입깊이, 연단거리 및 콘크리트 강도를 변수로 한 세트앵커의 실험 및 유한요소 해석 결과를 통하여 콘크리트에 매입된 저하중용 후설치 세트앵커의 전단 파괴거동에 미치는 영향을 규명하는 것을 그 목적으로 한다. 매입깊이 변수의 실험 결과 매입깊이가 얕을수록 콘크리트 강도의 영향이 큰 것으로 나타났다. 연단거리 변수의 실험 결과 동일한 파괴모드를 보이면서 콘크리트 강도의 영향이 크지 않은 것으로 나타났다. 강재 파괴가 발생한 실험 결과를 비교해 보았을 때 콘크리트 강도가 클수록 변위가 상대적으로 더 작게 나타났다.

• 한국가스학회지
• /
• 제13권4호
• /
• pp.53-60
• /
• 2009

냉각수, 수증기 등과 같은 유틸리티를 사용하는 설비에서는 장치손상지역에 의한 사고 피해크기(COF)가 0의 값을 나타내고, 이로 인해 위험도가 0으로 나타난다. 따라서 본 연구에서는 위험기반검사(RBI)에서 장치손상지역에 의한 COF로부터 위험도를 산출하는 방법을 개선하여 재정적 손실에 의한 COF로부터 위험도를 산출하는 RBI 절차를 개발하였다. 그리고 장치손상지역과 재정적 손실에 의한 위험도로부터 검사주기를 동시에 산정하는 RBI 프로그램(KS-RBI Ver 3.1)을 개발하여 석유화학공정에 적용하였다. 그 결과, 재정적 손실에 의한 COF로부터 산출한 위험도는 장치손상지역에 의한 COF로부터 산출한 위험도 결과와 거의 유사하였다. 그러나 유틸리티를 사용하거나 고가의 설비에서는 장치손상지역에 의한 경우보다 재정적 손실에 의한 COF로부터 설비의 위험도를 보다 정확하게 산출할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권6호
• /
• pp.113-119
• /
• 2019

본 연구는 전기비저항 측정시 실험체 크기에 따른 영향에 대해 비저항추정모델을 이용한 해석적 검토를 목적으로 한다. 실험에서는 콘크리트 실험체를 제작하여 전극 간격별 겉보기 비저항 측정하였다. 측정된 겉보기 비저항은 실험체 크기가 작아지고 외측(가장자리)에 가까울수록 겉보기 비저항치의 왜곡현상이 심해진다는 것을 확인할 수 있었다. 측정치와 해석치의 비교·분석 결과, 실험체 크기의 영향성 검토에 REM이 활용될 수 있을 것으로 기대된다.