• Journal of the Korean Wood Science and Technology
• /
• 제36권2호
• /
• pp.29-38
• /
• 2008

It is well-known that the strength properties of wood connections depend on the density of the wood members, the diameter of the fasteners, the number of fasteners, and the arrangement of the fasteners, etc. In this study, the connection with inserted steel plates and drift pins was made in different configurations. The specimens were Larch and Sugi glulam connections. The specimens were loaded in tension, and the yield loads of the connections were obtained. The values obtained from the tests were compared with the predicted values. Good agreement between the yield loads obtained from the tension failure tests and the predicted yield loads were shown. It was shown that the density of the wood member barely affected the strength properties of the connections. The strength decreases of the Sugi glulam connections by the group effect were less than those of the Larch glulam connections.

• Steel and Composite Structures
• /
• 제27권1호
• /
• pp.75-87
• /
• 2018

This paper presents a new method to compute the shear strength of composited structural B-C-W members. These B-C-W members, defined as concrete-filled steel box beams, columns and shear walls, consist of a slender rectangular steel plate box filled with concrete and inserted steel plates connecting the two long-side steel plates. These structural elements are intended to be used in structural members of super-tall buildings and nuclear safety-related structures. The concrete confined by the steel plate acts to be in a multi-axial stressed state: therefore, its shear strength was calculated on the basis of a concrete's failure criterion model. The shear strength of the steel plates on the long sides of the structural element was computed using the von Mises plastic strength theory without taking into account the buckling of the steel plate. The spacing and strength of the inserted plates to induce plate yielding before buckling was determined using elastic plate theory. Therefore, a predictive method to compute the shear strength of composited structural B-C-W members without considering the shear span ratio was obtained. A coefficient considering the influence of the shear span ratio was introduced into the formula to compute the anti-lateral bearing capacity of composited structural B-C-W members. Comparisons were made between the numerical results and the test results along with this method to predict the anti-lateral bearing capacity of concrete-filled steel box walls. Nonlinear static analysis of concrete-filled steel box walls was also conducted by using ABAQUS and the results agreed well with the experimental data.

• 한국강구조학회 논문집
• /
• 제20권5호
• /
• pp.601-608
• /
• 2008

단층 래티스 돔에 사용되는 접합부는 그 형태나 접합방법에 따라 다양한 거동 특성을 지닌다. 볼 조인트의 경우, 다루기 쉽고 현장 적용에 유리하지만, 강성과 내력이 약하기 때문에 장스팬의 확보에 있어서 불리하다. 용접 접합부는 볼 조인트에 비해 강성과 내력이 우수하고, 장스팬을 확보할 수 있지만, 용접 접합부에 관한 연구 및 실험은 드문 실정이다. 본 연구에서는 단층 래티스 돔에 적용 가능한 용접 접합부를 제안하고, 이를 기존접합부와의 비교하기 위한 실험을 수행하였다. 또한 제안된 접합부에 대해 삽입 플레이트의 길이, 두께, 여장을 변수로 하여 각각의 변수에 의한 실험체의 거동의 변화를 살펴보았다. 실험을 통한 결과를 토대로 하여 새로운 형태의 용접 접합부를 제안하고자 한다.

• 한국정밀공학회지
• /
• 제17권7호
• /
• pp.147-155
• /
• 2000

To reduce the noise from wood cutting saw at the saw mill(lumber mill) or a construction area, some multi-layer sandwich saw blades which a aluminum or copper plate was inserted between the two steel plates were developed and were tested of the wood cutting noise level at various test places. From the research, it was found that the multi-layer saw blade with copper or aluminum plate between steel plates and spot welded 60 points could reduce the wood cutting sound level about 8.3 dB(97.031 dB - 88.743 dB) at indoor test and 3.8 dB(84.805 - 81.638 dB) at field test.

• Steel and Composite Structures
• /
• 제44권3호
• /
• pp.339-351
• /
• 2022

A mortar-filled rectangular hollow structural section (RHS) can increase a structural section property as well as a compressive buckling capacity of a RHS member. In this study, the tensile performance of newly developed mortar-filled RHS members was experimentally evaluated with various connection details. The major test parameters were the type of end connections, the thickness of cap plates and shear plates, the use of stud bolts, and penetrating bars. The test results showed that the welded T-end connection experienced a brittle weld fracture at the welded connection, whereas the tensile performance of the T-end connection was improved by additional stud bolts inserted into the mortar within the RHS tube. For the end connection using shear plates and penetrating stud bolts, ductile behavior of the RHS tube was achieved after yielding. The penetrating bars increased load carrying capacity of the RHS. Based on the analysis of the load transfer mechanism, the current design code and test results were compared to evaluate the tensile capacity of the RHS tube according to the connection details. Design considerations for the connections of the mortar-filled RHS tubes were also recommended.

• 한국강구조학회 논문집
• /
• 제24권3호
• /
• pp.313-323
• /
• 2012

본 연구의 목적은 콘크리트량을 저감시키기 위해 오메가형 강판을 삽입한 철선일체형 중공 데크플레이트 슬래브와 용접 H형강합성보의 휨성능 및 $CO_2$ 감소량을 평가하는 것이다. 중공 데크플레이트 슬래브는 콘크리트의 양을 줄여 건물의 중량을 저감시킬 수 있을 뿐만 아니라 환경친화적인 구조물을 확보할 수 있다. 따라서 본 연구에서는 액츄에이터를 이용한 단조가력 실험을 실시하여 합성보의 휨성능을 평가하였으며, 기존연구를 바탕으로 이산화탄소의 배출량을 정량적으로 평가하였다. 주요 실험 변수는 오메가형 강판 상부 슬래브의 콘크리트 두께, 오메가형 강판의 단속길이 등이다. 실험결과, 용접 H형강 보에 오메가형 강판을 삽입한 철선일체형 중공 데크플레이트 슬래브를 적용하여 합성보로 사용하면, 콘크리트 양의 감소에 의한 합성보의 휨내력 저하는 없는 것으로 나타났으며, $CO_2$ 절감에도 효과적인 것으로 나타났다.

• 한국공간구조학회논문집
• /
• 제21권3호
• /
• pp.69-76
• /
• 2021

Precast concrete (PC) modules have been increased its use in modular buildings due to their better seismic performance than steel modules. The main issue of the PC module is to ensure structural performance with appropriate connection methods. This study proposed a PC modular beam system for simple construction and improved structural and splicing performance. This modular system consisted of modules with steel plates inserted, and it is easy to construct by bolted connection. The steel plates play the role of tensile rebar and stirrup, which has the advantage of structural performance. The structural performance of the proposed PC modular beam system was evaluated by flexural test on one reinforced concrete (RC) beam specimen consisting of a monolithic, and two PC specimens with the proposed PC modular beam system. The results demonstrated that the proposed PC modular beam system achieved approximately 86% of the structural performance compared to the RC monolithic specimen, with similar ductility of approximately 1.06 fold greater.

• 소성∙가공
• /
• 제26권3호
• /
• pp.174-180
• /
• 2017

In this study, a new spot welding with electric resistance heated dies is suggested for the spot welding of non-ferrous metal plates for drawing and concurrent spot welding. This welding method involves two heating processes such as heating by conduction of electric resistance heated dies and heating by resistance between contacted surfaces of two plates by welding current induced to copper dies for the fusion of contacted metal. This welding process has welding variables such as current induced in heated and copper dies, the inner diameters of heated dies, and edge shape of the copper dies. Experimental conditions for each current should be established to get successful welding strength. The welding strength could reach to the desired value in industrial fields under the following conditions of contact diameters of heated dies in this case of overlapped aluminum5052 plates with 0.3-mm thickness: inner and outer diameters of 5.0 and 16mm, respectively; diameter of copper dies, 5.0mm; heating current, 6.8kA in heated steel dies; welding current, 8.6 kA in copper dies.

• Journal of the Korean Wood Science and Technology
• /
• 제33권6호통권134호
• /
• pp.31-37
• /
• 2005

본 연구는 각 결합부 조건에 따른 결합부의 강도적 성능 증가를 살펴보고자 하였다. 주 부재로 집성재를, 측면 부재로 3 mm 두께의 강철판을 사용하여 제작하였으며, 1 mm 두께의 강철판을 개수를 달리하여 집성재에 삽입하여 결합부를 제조하였다. 본 연구를 통해 아주 얇은 두께의 강철판이라도 대단면 부재인 집성재 내부에 삽입하여 결합부를 제조할 경우 강도에 상당한 증가를 보였다. 집성재 결합부는 강철판을 삽입하지 않은 A 그룹, 강철판을 1개 삽입한 B 그룹, 강철판을 2개 삽입한 C 그룹, 그리고 강철판을 3개 삽입한 D 그룹으로 각각 분류하였다. 강철판을 삽입하지 않은 A 그룹에 비해 강철판을 1개 삽입한 B 그룹은 최대값과 항복 하중값을 각각 18%, 13%, 강철판을 2개 삽입한 C 그룹은 27%, 20%, 강철판을 3개 삽입한 경우 33%, 24%의 강도 증가를 보였다. 하지만 집성재 내부에 얇은 두께의 강철판을 삽입하는데 필요한 추가적인 경제적 기술적 어려움으로 인해 강철판 삽입으로서 얻을 수 있는 강도적 성능 증가와 그에 따른 어려움을 충분히 고려해야 할 것이다.

• Steel and Composite Structures
• /
• 제3권1호
• /
• pp.47-64
• /
• 2003

In a nonlinear finite element study on the mechanical behavior of simple beam connections to continuous concrete-filled steel tube columns, two principally different connection types were analyzed: one with plates attached to the outside of the tube wall, relying on shear transfer, and one with an extended plate inserted through the steel section to ensure bearing on the concrete core. The load was applied partly at the connection within the column length and partly at the top, representing the load from upper stories of a multistory building. The primary focus was on the increased demand for load transfer to ensure composite action when concrete with higher compressive strength is used. The results obtained from the analyses showed that the design bond strength derived from push tests is very conservative, mainly due to the high frictional shear resistance offered by pinching and contraction effects caused by connection rotation. However, with higher concrete strength the demand for load transfer increases, and is hard to fulfill for higher loads when connections are attached only to the steel section. Instead, the connection should penetrate into the concrete core to distribute load to the concrete by direct bearing.