• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.126-129
• /
• 2006

Many researchers have made an effort to explain flight mechanism of flapping insects. As a result, several unsteady mechanisms about lift generation in insect flight have been proposed. But it has a limits to elucidate insect's forward flight and abrupt thrust, because most of these are about insect's hovering flight. For this reason, the objective of this paper is to simulate "Figure-of-eight motion" of insect's wing during tethered flight for comprehending aerodynamic property in insect's forward flight.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.826-831
• /
• 2004

Recently, studies have been carried out to develop unmanned Micro Air Vehicles(MAVs) that can search and monitor inside buildings during urban warfare or rescue operations in hazardous environments. However, existing fixed-wing and rotary-wing MAVs cannot travel at extremely low or high speeds, hover in place, or change directions instantly. This has lead researches to search for other flight methods that could overcome those drawbacks. Insect flight principles and its applications to MAVs are being studied as an alternative flight method. To take flight, insects flap and rotate their wings. These wing motions allow for high maneuverability flight such as hovering, vertical take off and landing, and quick acceleration and deceleration. This paper proposes a method for designing a mechanism that reproduces hovering insect flight, the basis for all other forms of insect flight. The design of a mechanism that can reproduce the motion that causes maximum lift is proposed, the required specifications are calculated, and a method for reproducing hovering insect flight with a single motor is presented. Also, feasibility of the design was confirmed by simulation.

• 로봇학회논문지
• /
• 제11권4호
• /
• pp.256-261
• /
• 2016

An insect-like flapping-wing flying-robot should be able to produce flight forces and control moments at the same time only by flapping wings, because there is no control surface at tail just like an insect. In this paper, design principles for the flapping mechanism and control moment generator are briefly explained, characteristics measured force and moment generations of the robot are presented, and finally controlled flight of the flying robot is demonstrated. The present insect-like robot comprises a lightweight flapping mechanism that can produce a flapping angle larger than $180^{\circ}$ and a control moment generator that produces pitch, roll, and yaw moments by adjusting location of the trailing edges at the wing roots. The measured force and moment data show that the control input angles less than $9^{\circ}$ would not significantly reduce the vertical force generation. It is also observed that the pitch, roll, and yaw control moments are produced only by the corresponding control input. The simple PID control theory is used for the controlled flight of the flying robot, controlling pitch, roll, and yaw motions. The flying robot successfully demonstrated controlled flight for about 40 seconds.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1441-1445
• /
• 2008

Insect flight is adapted to cope with each circumstance by controlling a variety of the parameters of wing motion in nature. Many researchers have struggled to solve the fundamental concept of insect flight, but it has not been solved yet clearly. In this study, to find the most effective flapping wing kinematics, we conducted to analyze CFD data on fixing some of the optimal parameters of wing motion such as stoke amplitude, flip duration and wing rotation type and then controlled the deviation angle by fabricating wing tip motion. Although all patterns have the similar value of lift coefficient and drag coefficient, pattern A(pear-shape type) indicates the highest lift coefficient and pattern H(pear-shape type) has the lowest lift coefficient among four wing tip motions and three deviation angles. This result suggest that the lift and drag coefficient depends on the angle of attack and the deviation angle combined, and it could be explained by delayed stall effect.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.506-511
• /
• 2009

Insect flight is adapted to cope with each circumstance by controlling a variety of the parameters of wing motion in nature. Many researchers have struggled to solve the fundamental concept of insect flight, but it has not been solved yet clearly. In this study, to find the most effective flapping wing dynamics, we conducted to analyze CFD data on fixing some of the optimal parameters of wing motion such as stoke amplitude, flip duration and wing rotation type and then controlled the deviation angle by fabricating wing tip motion. Although all patterns have the similar value of lift coefficient and drag coefficient, pattern A(pear-shape type) indicates the highest lift coefficient and pattern H(pear-shape type) has the lowest lift coefficient among four wing tip motions and three deviation angles. This result suggest that the lift and drag coefficient depends on the angle of attack and the deviation angle combined, and it could be explained by delayed stall and wake capture effect.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.152-161
• /
• 2013

This paper presents a control effectiveness analysis of the hawkmoth Manduca sexta. A multibody dynamic model of the insect that considers the time-varying inertia of two flapping wings is established, based on measurement data from the real hawkmoth. A six-degree-of-freedom (6-DOF) multibody flight dynamics simulation environment is used to analyze the effectiveness of the control variables defined in a wing kinematics function. The aerodynamics from complex wing flapping motions is estimated by a blade element approach, including translational and rotational force coefficients derived from relevant experimental studies. Control characteristics of flight dynamics with respect to the changes of three angular degrees of freedom (stroke positional, feathering, and deviation angle) of the wing kinematics are investigated. Results show that the symmetric (asymmetric) wing kinematics change of each wing only affects the longitudinal (lateral) flight forces and moments, which implies that the longitudinal and lateral flight controls are decoupled. However, there are coupling effects within each plane of motion. In the longitudinal plane, pitch and forward/backward motion controls are coupled; in the lateral plane, roll and side-translation motion controls are coupled.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권3호
• /
• pp.267-281
• /
• 2012

This paper reviews the flight mechanics and control of birds and bird-size aircraft. It is intended to fill a niche in the current survey literature which focuses primarily on the aerodynamics, flight dynamics and control of insect scale flight. We review the flight mechanics from first principles and summarize some recent results on the stability and control of birds and bird-scale aircraft. Birds spend a considerable portion of their flight in the gliding (i.e., non-flapping) phase. Therefore, we also review the stability and control of gliding flight, and particularly those aspects which are derived from the unique control features of birds.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제1권2호
• /
• pp.91-93
• /
• 2000

Insects have many excellent features and functions in their small bodies, such as hexapod walking, flapping flight, vision systems, sensory hairs, etc, and those characteristics can be thought as good models for many types of robots. Insects also will be good models far micro-machines because of its size. Insect behavior consists of simple reflex acts and programmed behavior, Some robots were made in order to clarify the emergent mechanism of insect behavior, Through some experiments it would be found that even if insect behavior consists of some simple action patterns, it looks intelligent through interactions its sensors and actuators with its complex environment. In the near futures small robots inspired by insects will be used in many fields of our life. I hope that insect-model based robots will play an active part in many fields and that they will make us happy.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.55-55
• /
• 2003

• 한국응용곤충학회지
• /
• 제47권3호
• /
• pp.209-216
• /
• 2008

지구온난화로 인한 나비 생활주기 변화를 파악하기 위해 광릉 숲에서 1958년과 2004년에 주별로 조사한 나비모니터링 자료를 분석하였다. 본 연구에서는 1958년에 비해 2004년에 나비류의 최초 출현시기와 평균 출현시기가 빨라졌는지, 출현기간이 길어졌는지를 검토하였다. 최초발생시기와 발생기간에서는 차이가 나타나지 않았고, 평균 출현시기에서는 느려진 종들이 오히려 많았다. 따라서 본 연구에서는 지구온난화로 예상되는 나비류 생활주기의 변화를 확인할 수 없었다. 기온 증가에도 불구하고, 예견되는 생활주기 변화가 나타나지 않은 원인을 검토하였다. 아울러 국내의 나비를 지구온난화 지표로 적절하게 활용하기 위해, 현재 나비상 연구에 있어서 문제점과 해결책을 검토하였다.