• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.5
• /
• pp.753-767
• /
• 2019

Dyeing behavior of indigo leaf powder was examined in regards to the effect of the amount of pigments on color and dye adsorption for silk dyed by reduction and nonreduction dyeing. The amount of indigotin and indirubin pigments adsorbed in dyed silk was examined by HPLC-DAD analysis. The color of dyed silk showed 7.7BG - 2.7B hue when silk was dyed at $50^{\circ}C$, and 3.5G - 4.9BG when dyed at $70^{\circ}C$. Blue ($b^*$) and green ($a^*$) color decreased as the pH of dyebath increased. When silk was dyed using nonreduction, R (red) and RP (red purple) hue and R hue was more apparent in samples dyed at $90^{\circ}C$. In reduction dyeing, amount of indigotin detected from silk exceeded the amount that was initially contained in the input dye. The amount of indirubin was lower than indirubin that was initially in the powder. In nonreduction dyeing, silk showed a higher amount of indirubin adsorption compared to silk dyed by reduction. The amount of indigotin adsorbed in silk was lower than the amount initially contained in the input dye. The amount of indigotin and indirubin adsorption was primarily dependent upon the dyeing method-reduction or nonreduction along with dyeing temperature and the pH of dyebath.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.2
• /
• pp.107-114
• /
• 1999

This paper presents an application of artificial neural networks(ANN) to assess the dynamic security of power systems. The basic role of ANN is to provide assessment of the system's stability based on training samples from off-line analysi. The critical clearing time(CCT) is an attribute which provides significant information about the quality of the post-fault system behaviour. The function of ANN is a mapping of the pre-fault, fault-on, and post-fault system conditions into the CCT's. In previous work, a feed forward neural network is used to learn this mapping by using the generation outputs during the fault as the input data. However, it takes significant calculation time to make the input data through the network reduction at a fault as the input data. However, it takes significant calculation time to make the input data through the network reduction at a fault considered. In order to enhance the speed of security assessment, the bus data and line powers are used as the input data of the ANN in thil paper. Test results show that the proposed neural networks have the reasonable accuracy and can be used in on-line security assenssment efficiently.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.7
• /
• pp.717-724
• /
• 2013

Industrial cranes are indispensable equipment in heavy industry. However, unwanted vibrations in cranes often cause accidents. Input shaping is widely accepted as a useful tool for removing residual vibration in cranes. A unity magnitude zero vibration (UMZV) input shaper is often used for cranes driven by on-off-type motors. However, although a UMZV input shaper minimizes residual vibration, the input shaper cannot prevent the crane from moving slightly further than expected from the original command. This paper describes an improved method of input shaping that can compensate for position inaccuracies, as well as remove the residual vibration of cranes. Experiments were performed to validate the proposed input-shaping method, illustrated through numerical simulations.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1997.11a
• /
• pp.147-161
• /
• 1997

In the future, the performance of B-lSDN offering the multimedia and a various service depends on the performance of switch that is the important factor consisting of network. Bufferless banyan network consisted of MIN(multistage interconnection network) selected for- the fabric of ATM switch and has a limitation of performance because of blocking. Input buffered banyan networks with FIFO(first-in first-out) buffering scheme for the reduction of blocking and the cell bypass queueing theory for the reduction of HOL(head of line) blocking were seperately compared of the performance of switch. Specially input buffered banyan networks were applied monotonic buffering scheme that was proposed. As a result of simulation, Buffered Banyan Network with cell bypass queueing theory showed better performance than FIFO type input buffered Banyan network. Monotonic increase buffering scheme showed better performance than Monotonic decrease buffering scheme.

• Proceedings of the KIEE Conference
• /
• 2005.10a
• /
• pp.132-135
• /
• 2005

A design for the input filter and the output filter of a single-phase uninterruptible power supply (UPS) system is proposed. A filter design example is presented. And also, this dissertation describes a reduction of the DC voltage ripple of a single-phase UPS. The input power of proposed UPS fluctuates with twice frequency of the utility source, which causes DC voltage fluctuation. The reduction of the DC voltage fluctuation requires a large DC link capacitor. The proposed method uses a LC series resonant filter paralleled with a conventional smoothing capacitor. The effectiveness of the proposed method was confirmed by simulation results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.3
• /
• pp.249-256
• /
• 2014

This paper proposes a torque control method of permanent magnet synchronous motor, which has small torque ripple. The proposed control method is using the finite control set-model predictive control(FCS-MPC) strategy. An optimal input voltage vector minimizing a cost function is chosen among 6 passible active input voltage vectors following the FCS-MPC strategy. Then, a modulation factor for the optimal input voltage vector is computed to minimize the torque ripple. Thus, the proposed control method yields fast torque response and small torque ripple. The efficacy of the proposed method was verified through simulation and experiment.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.556-559
• /
• 2001

In this paper, we proposed AC/DC boost converter to improve input current harmonic reduction in SMAW(shielded metal-arc welding). The proposed harmonic reduction with the boost converter design and the UC2854 integrated circuit which controls the converter, The topology of welding power supply is made of a pair of boost converter and welder half-bridge IGBT inverter. The voltage arc is modeled by a variable resistance in series with a voltage source. The results has been confirmed by PSIM simulation tool. The simulation results show that input at current is nearly sinusoidal with low harmonic contents and sinusoidal input current waveform at high power factor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.280-286
• /
• 2013

In this paper, a noise reduction system is proposed for the speech interface in intelligent TV applications. To reduce TV speaker sound which are very serious noises degrading recognition performance, a noise reduction algorithm utilizing the direct TV sound as the reference noise input is implemented. In the proposed algorithm, transfer functions are estimated to compensate for the difference between the direct TV sound and that recorded with the microphone installed on the TV frame. Then, the noise power spectrum in the received signal is calculated to perform Wiener filter-based noise cancellation. Additionally, a postprocessing step is applied to reduce remaining noises. Experimental results show that the proposed algorithm shows 88% recognition rate for isolated Korean words at 5 dB input SNR.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.85-92
• /
• 2007

This paper presents a design optimization of a new Advanced Active Blade Twist (AATR-II) blade incorporating single crystal Macro Fiber Composites (MFC) and conducts vibratory loads reduction analysis using an obtained optimal blade configuration. Due to the high actuation performance of the single crystal MFC, the AATR blade may reduce the helicopter vibration more efficiently even with a lower input-voltage as compared with the previous ATR blades. The design optimization provides the optimal cross-sectional configuration to maximize the tip twist actuation when a certain input-voltage is given. In order to maintain the properties of the original ATR blade, various constraints and bounds are considered for the design variables selected. After the design optimization is completed successfully, vibratory load reduction analysis of the optimized AATR-II blade in forward flight condition is conducted. The numerical result shows that the hub vibratory loads are reduced significantly although 20% input-voltage of the original ATR blade is used.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.87-95
• /
• 2004

This paper proposes a new test data compression/decompression method for SoC(Systems-on-a-Chip). The method is based on analyzing the factors that influence test parameters: compression ratio and hardware overhead. To improve compression ratio, the proposed method is based on Modified Statistical Coding (MSC) and Input Reduction (IR) scheme, as well as a novel mapping and reordering algorithm proposed in a preprocessing step. Unlike previous approaches using the CSR architecture, the proposed method is to compress original test data and decompress the compressed test data without the CSR architecture. Therefore, the proposed method leads to better compression ratio with lower hardware overhead than previous works. An experimental comparison on ISCAS '89 benchmark circuits validates the proposed method.