• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.833-839
• /
• 1986

This paper describes the development of a new type of an integrated optical filter using the frequency characteristics of a directly-connected directional coupler with a Rib waveguide. It has been designed for multiplexing and demultiplexing light froups in different wavelength regions. Also, the effects of higher modes, couplings between input waveguides or output waveguides, and dispersion of material are considered.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.170-172
• /
• 2005

The DSD(Direct Stream Digital) encoder, which is a standard for SACD(Super Audio Compact Disc) proposed by Sony and philips, use 1 bit representation with a sampling frequency of 2.8224 MHz (64 $\times$ 44.1 kHz). For multi-rate PCM (Pulse Code Modulation) input like as 48/96/192 kHz, a external sample-rate converter is necessary to the DSD encoder. This paper has been proposed a digital filter structure composed of sample-rate converter and interpolation filter for the DSD encoder with multi-rate (48/96/192 kHz) PCM input. without a external sample-rate converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.275-278
• /
• 2005

본 논문에서는 입력 필터의 영향을 받는 스위칭 전력변환기의 이론적인 해석 과정을 나타내었다. Middle-brook의 extra element theorem을 이용하여 이론적으로 입력 필터 상호 작용을 해석하였으며, 컴퓨터 시뮬레이션을 통해 확인하였다. 또한 전압 제어 및 전류 제어방식 승압형 변환기를 제작하여 이를 검증하였다.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.586-592
• /
• 2016

The current control of Continuous Conduction Mode(CCM) can be implemented by several methods: peak current control; average current control; and hysteresis control. Among these methods, the hysteresis current control is popularly applied in various converter applications because of its simplicity of implementation, fast current control response and inherent peak current limiting capability. However, a current controller with conventional hysteresis band which multiplies the current reference has the disadvantage that the modulation frequency varies in one cycle of the input voltage and, as a result, generates high switching frequency in the low input voltage section. Also it is complicated to design the input filter due to varying switching frequency. This paper proposed an optimum hysteresis-band current control method where the band is generated by using both multiplication method and sum method to maintain the modulation frequency to be nearly constant. This approach can solve the high switching frequency in the low input voltage section, and achieve easy design of input filter. The performance of the proposed converter is verified with the simulation and the experimental works.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.39-41
• /
• 2004

This study is to optimize the condition of pulse parameters using the response surface method in micro pulse TIG welding of pleated type metallic filter. The input parameters used were pulse current, base current, pulse duty, frequency and welding speed and the hydraulic pressure was used as the output parameter. The central composite design was designed using second order regression model, As the results, the optimal welding condition to manufacture the pleated type metallic filter was obtained.

• 한국전자파학회논문지
• /
• 제15권11호
• /
• pp.1100-1107
• /
• 2004

본 논문에서는 다단 결합선로 여파기(edge coupled-line filter)의 입출력단을 탭 선로(tapped-line)의 형태로 구현하기 위하여 등가회로 기반의 새로운 설계법을 개발하여 적용하였다. 다단 결합선로 여파기는 입출력단의 선로 간격이 매우 좁아서(수 mil) 제작하기가 힘든 결함이 있는데, 이를 탭 선로로 대체함으로써 제작 시 오차에 덜 민감하고 밀링머신으로 쉽게 제작할 수 있도록 하였다. 또한, 본 논문에서 제안된 간단한 설계법을 사용하면 20 GHz 이하의 주파수 대역에서 20 % 이하의 대역폭 특성을 갖는 탭 선로의 파라미터를 얻을 수 있으며, 이를 바탕으로 정확한 탭 선로 여파기를 설계할 수 있다.

• Journal of Power Electronics
• /
• 제8권1호
• /
• pp.1-9
• /
• 2008

This paper presents the design and analysis of a new input AC current wave shaping AC-DC converter for cost effective harmonic mitigation under varying loads. The proposed converter consists of a delta-polygon connected autotransformer based twelve-pulse AC-DC converter and a small rating passive shunt filter tuned at $11^{th}$ harmonic frequency. The proposed AC-DC converter eliminates the most dominant $5^{th},\;7^{th}$ and $11^{th}$ harmonics and reduces higher order harmonics; thereby, resulting in an improved power quality at AC mains. Moreover, the design of the autotransformer is modified to make it suitable for retrofit applications, where presently a 6-pulse diode bridge rectifier is used. To validate the proposed approach, various power quality indices are presented under varying loads. Experimental results obtained on the developed converter are given to validate the model and design of the proposed converter.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.939-947
• /
• 2008

The GPS tracking loop consists of three parts in general: discriminator, loop filter and DCO (Digitally Controlled Oscillator). The loop filter is the main part of the tracking loop designed to ensure a good tracking performance. Generally, the loop filter is designed using classical PI(Proportional Integral) control. Although the carrier Doppler and code Doppler are generated by the same relative movement between the satellite and the user, often, the loop filters for each tracking loop are designed separately and independently. Sometimes, they are used in a combined manner such as carrier aided code tracking, FLL assisted PLL, etc. For better GPS signal tracking, we need to design the FLL/PLL/DLL altogether optimally. The purpose of this paper is to design a GPS receiver tracking loop based on the Kalman filter in a combined manner. Also, the proposed GPS receiver tracking loop is compared with a conventional tracking loop in terms of the transfer function and the DCO input. This paper shows that conventional tracking loop is equal to the Kalman filter based tracking loop.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.9-14
• /
• 2018

본 연구는 위성중계기용 SHF 대역 IMUX(: Input Multiplexer)의 설계 및 구현에 대해 기술하였다. SHF 대역 입력다중화기는 Combine Filter, 분배기, Isolator 및 Channel Filter로 구성된다. 제작 전 우주환경에 대한 사전 시뮬레이션 분석을 통하여 장비 오동작 가능성을 최소하였으며, 발사환경 시 발생하는 진동에 대한 시뮬레이션을 통해 신뢰성 있는 IMUX를 설계하였으며, 제작 후 주요 성능지표에 대해 만족여부 확인 및 사전 성능 시뮬레이션 결과와 비교하였다.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1854-1862
• /
• 2000

Input shaping method is to convolute input shaper, which is sequence of impulses, with reference input command not to excite the natural frequency of system. To reduce residual vibration for the ch ange of frequency, the number of impulses should be increased. Until now, amplitudes and time interval of those has been searched from the derivative of residual vibration. However, if time interval of impulses is fixed as the half of vibration period of system, input shaper H(z) in z-domain becomes (I-pz-1)n/K in which increasing n is the mean that robustness for change of parameter is improved. Also, design of many types of input shapers in z-domain is very easy because sensitivity curve is displayed with $\mid$H(z)zn$\mid$$\times$100. In the z-domain, EI(Extra-Insensitive) input shaper could be designed without solving nonlinear simultaneous equations as design in continuous time domain. In addition to, the design possibility of input shaper for a damped system was shown.