• 한국수산과학회지
• /
• 제7권4호
• /
• pp.229-233
• /
• 1974

1. 옥돔, 자리돔, 전복의 육질에 대한 무기질 성분을 정량하여 Table. 3과 같은 결과를 얻었다. 2. Copper, Phosphorus, Iron, Sodium, Calcium의 함량은 자리돔(정어), 옥돔(저어), 전복(패류)간에 뚜렷한 함량차이가 인정된다. 끝으로 이 실험은 1972연도 문교부 학술 연구 조성비로서 실시하였으며, 실험을 하는데 지도와 협조를 하여 주신 필현 교수와 허 종화 교수에 감사하는 바이다.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.358-364
• /
• 2008

Wood-inorganic material composite (WIC) was prepared by impregnating wood with copper sulfate ($CuSO_4\;5H_2O$) solution and by immersed wood in sodium carbonate($Na_2CO_3$) solution in order to introduce insoluble copper compounds {copper carbonate hydroxide, $CuCO_3\;Cu(OH)_2$} into the wood to give fungicidal effects in treated-wood. The weight percent gains (WPGs) of treated wood reached maximum value by impregnation of 20% copper sulfate solution and immersion in about 15% sodium carbonate solution for 24 hrs. Inorganic substances were present mainly in the lumina and cross-field pitting of tracheides. These substances were proved to be the insoluble copper carbonate hydroxide against water by the energy dispersive X-ray analyzer in conjunction with a scanning electron microscope (SEM-EDXA). The treated specimens showed high preservative effectiveness because the weight losses were hardly occurred by the fungi degradation test.

• Applied Microscopy
• /
• 제52권
• /
• pp.3.1-3.8
• /
• 2022

Our purpose in this study is to analyze the microstructural characteristics and constituent elements of inorganic substances added to the yellow ink and red ink pigments used in permanent makeup. We observed the microstructural properties of inorganic pigments added to the ink using a scanning electron microscopy (SEM) and analyzed the constituent elements of the inorganic pigment particles using an energy dispersive X-ray spectroscopy (EDX). In red wine-colored ink, cubic titanium dioxide with a diameter of 110 to 200 nm was the major component, and rod-shaped iron oxide was rarely observed. Most of the ingredients of taupe yellow ink were rod-shaped yellow iron oxide, and a small amount of cubic titanium dioxide was observed. Red wine-colored ink and taupe yellow ink contained lumps composed of titanium dioxide particles. In red wine-colored ink, lumps were formed by agglomeration. However, we observed that the surface of the lump composed of titanium dioxide in the taupe yellow ink had a smooth surface caused by external physical compression. The titanium dioxide particle mass which found in taupe yellow ink in this study is an artificial product. When this mass accumulates in the dermis, it may cause a color mismatch. Therefore, permanent makeup using fine pigments should be free of foreign substances that may cause trouble in the skin. In addition, there is a need to improve the quality of the ink so that the required color can be safe and long lasting in the dermis.

• 자원리싸이클링
• /
• 제17권3호
• /
• pp.10-20
• /
• 2008

농업용 폐비닐의 재활용에 대한 무기충진재의 거동을 연구하기 위하여 한국환경자원공사 시화 및 정읍공장에서 세척된 PE fluff들을 각각 사용하였다. 먼저 PE 플러프에 무기충진재인 탄산칼슘과 칼펫을 배합비율별로 혼합하여 용융 압출을 통한 시험용 펠렛들을 제조한 후 프레스 몰딩을 거쳐 시료별로 시험용 시트들을 제작하였다. 이들 무기충진 복합재의 기계적 특성인 인장, 굴곡, Izod 충격시험을 실시하였고, 열적 특성인 열변형온도, vicat 연화온도, 용융흐름지수(MFI)를 시험 및 분석을 하였다. 또한 플라스틱 내부에서 무기충진재의 분산성 및 wetting정도를 확인하기 위하여 SEM을 통해 모폴로지를 조사하였다. 이들 결과로부터 물리적인 측면과 경제적인 관점에서 재생 PE와 무기충진재의 최적 배합비들을 얻었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.48-49
• /
• 2018

Recently the old buildings have been increasing and increasing reconstruction. As a result, the frequency of use of architectural adhesives has increased. Adhesives are not only used for bonding but also for building materials used in various fields. However, since the adhesive is made of an organic material, it causes various skin diseases and sick house syndrome, and when a fire occurs, harmful substances are generated, and incomplete combustion may cause personal injury. Therefore, in this study, to solve the disadvantages of conventional adhesives, we tried to develop inorganic adhesives using inorganic materials.

• 한국식품조리과학회지
• /
• 제32권6호
• /
• pp.686-695
• /
• 2016

Purpose: This study aimed to investigate the quality characteristics of traditional and commercial soybean pastes (Doenjang) for development of traditional soybean pastes. Methods: Proximate compositions, amino acid nitrogen contents, pH, acidity, salt contents, chromaticity, viable bacteria and inorganic substance contents of nineteen traditional and three commercial Doenjang were investigated. Results: Analysis of proximate compositions indicated a significant difference between samples. In moisture content, D10 did not meet the standard of food codex. The contents of moisture, fat, protein and ash were slightly higher in traditional than commercial Doenjang. However, the carbohydrate content was 2-fold higher in commercial than traditional, and thus, the calories were also higher. The amino nitrogen content was lower in commercial than traditional Doenjang. pH, acidity and salt contents of Doenjang were pH 4.67-6.15, 1.53-3.29%, and 9.01-18.78%, respectively. pH and acidity showed no significant differences between traditional and commercial Doenjang, however, salt contents were significantly higher in traditional than commercial Doenjang. In case of chromaticity, the averages of L, a, b values were higher in traditional Doenjang. In microbiological analysis, total bacteria counts were higher in traditional than commercial Doenjang. The number of Bacillus cereus in D12 and D19 exceeded the standard of food codex. Staphylococcus aureust was undetected in all samples. The number of fungi varied widely between samples, with no detection in five traditional and all commercial Doenjang. Results of inorganic substance analysis indicated that contents of inorganic substances in Doenjang were in order of Na, K, Mg and Ca. Overall, Na content was higher in traditional Doenjang. Contents of inorganic substances showed wide variations in traditional Doenjang. Conclusion: For the development of traditional Doenjang, quality standardization and ensuring safety are considered necessary.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.310-321
• /
• 2019

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

• 생태와환경
• /
• 제41권4호
• /
• pp.554-562
• /
• 2008

To evaluate the limitation for epiphytic and planktonic algal growth, acid extractable inorganic phosphorus (AP), implying the luxury uptake phosphorus, was measured in five reed zones of Lake Biwa. The AP in epiphytic substances was 0.7 to 1.4 mg P surface stem $m^{-2}$ in summer and 1.2 to 2.8 mg P $m^{-2}$ in winter. On the other hand, the amount in planktonic substances was 1.4 to 5.7 mg P m -3 and 0.8 to 5.4 mg P $m^{-3}$ in both seasons. Contribution of AP in the epiphytic and planktonic phosphorus was 23 to 31% and 8 to 27% in summer, and 17 to 22% and 9 to 17% in winter. It suggests that in summer both epiphytic and planktonic algae had been luxuriously taken up phosphate into cells. The weight ratios of C : N : P were averaged 79 : 20 : 1 for the epiphytic substances and 81 : 12 : 1 for the particulate substances. On the other hand, the ratios without the luxurious phosphorus were 93 : 24 : 1 and 103 : 15 : 1, showing much higher values than the Redfield ratio. High ratio in the epiphytic substances indicates that the phosphorus is the limiting parameter, rather than nitrogen, regulating the growth of epiphytic algal populations.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2004년도 생명공학 실용화를 위한 비젼
• /
• pp.127-127
• /
• 2004

• 한국물환경학회지
• /
• 제21권5호
• /
• pp.431-441
• /
• 2005

The study was carried out to improve and regulate the drinking water quality standard and drinking water quality monitoring substances. For the reliability and safety of finished water, It has been monitored for trace organic and inorganic compounds of 333 in finished water of water treatment plants during 1989 to 2003. As a result of monitoring, 51 compounds were detected from 333 compounds, and it has been regulated the drinking water quality standard of 26 substances and 20 mitoring substance. Improvement and regulation method of the drinking water quality standard was performed by comparing and analyzing with detection concentration, detection frequency, risk assessment and foreign drinking water quality standard.