• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.837-841
• /
• 2003

Duplex microstructure of zirconia and alumina has been achieved via an organic-inorganic solution technique. Zirconium 2,4-pentanedionate, aluminum nitrate and polyethylene glycol were dissolved in ethyl alcohol without any precipitation. The organicinorganic precursor gels were turned to porous powders having volume expansion through explosive, exothermic reaction during drying process. The volume expansion was caused by abrupt decomposition of the organic groups in the gels during the vigorous exothermic reaction. The volume expanded, porous powders were crystallized and densified at 1500$^{\circ}C$ for 1 h. At the optimum amount of the PEG polymer, the metal cations were well dispersed in the solution and a homogeneous polymeric network was formed. The polymer content also affected on the specific surface area of the synthesized powder and the grain size of the sintered composite.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.209-219
• /
• 2018

Colloidally stable organic-inorganic (O-I) hybrid nanoparticles could be prepared using an alkoxysilanefunctionalized amphiphilic polymer (AFAP) precursor. O-I hybrid sols could maintain colloidal stability for six months even at 45% solid content and be coated onto glass as well as PET film to form transparent O-I hybrid films. The formation of O-I hybrid nanoparticles dispersed in cured coating films could be confirmed using scanning electron microscopy. The cured coating film showed 3H and 5H pencil hardness on PET and glass, respectively. Nanoindentation measurements also showed that their modulus and hardness was varied with the type of AFAP used in its preparation.

• 한국지열·수열에너지학회논문집
• /
• 제15권3호
• /
• pp.1-6
• /
• 2019

The basalt fiber, which is found to be non-toxic and harmless to the human body, is expected to become a trend for industrial fibers as they have better properties of non-combustion, heat-resistant, soundproof, absorbent, moistureproof, wear-resistant, corrosion resistant, lightweight, and high strength properties. Thus, in this study, we analyzed the chemical compositions of basalt produced at seven sites on Jeju Island for making a high value inorganic insulation material. The results showed that the MgO content of basalt collected from the eastern part of Jeju Island was higher than 7.5 percent, while that of the western region was less than 6 percent.

• 멤브레인
• /
• 제12권2호
• /
• pp.75-89
• /
• 2002

Polyethesulfone(PES) 상변환 막 제조 시 캐스팅 용액에의 무기염 첨가가 막의 구조 및 성능에 미치는 효과를 캐스팅 용액의 열역학적.속도론적 특성치로서 연구하였다. PES/NMP 캐스팅 용액에 첨가시킨 무기염의 종류[CaCl_2, LiCl, LiCl_4, ZnCl_2 $및 Mg(ClO_4)_2]$와 양을 달리하여 제조된 막의 몰폴로지와 막성능(순수 투과량 및 용질 배제도)을 캐스팅용액의 점도와 coagulation vague, 제막시간에 따른 광투과도 변화, 총괄 다공도와 순수 투과량, bovine serum albumin(BSA) 용액의 한외여과 실험 및 막단면의 SEM 사진 결과로서 설명하였다. 이 결과 모든 종류의 무기염에 대해 첨가량이 증가할수록 캐스팅 용액의 점도는 증가하고, coagulation value는 낮아져 열역학적 불안정성이 증가하며, 막 단면 상층부(top layer below skin surface)의 an게가 증가하였으며, BSA 배제도는 감소하고 순수 투과량은 CaC1$_2$ 및 LiCl 무기염을 제외하고는 점차 증가하였다. CaC1$_2$ 및 LiCl 무기염을 첨가한 경우는 첨가량이 증가함에 따라 macrovoid의 형성이 억제되었으며, 순간분리의 침강형식은 유지하나 침강 속도가 점차 느려졌다. 반면 LiCl_4$ 및 Mg(ClO_4)_2$무기염을 첨가한 경우는 침강속도가 점차 빨라졌다.

• 한국환경복원기술학회지
• /
• 제9권6호
• /
• pp.13-22
• /
• 2006

The purpose of this study is to propose rational methods in order to maintain vegetation condition and soil environment based on the analysis of tree growth in relation to the soil environment, which is one of the most significant environmental factors on vegetation condition in urban parks and open spaces. The result of the study can be described as below;The soil on every study site had strong acidity. In particular, study sites around industrial district and central business district showed extreme soil acidity. Therefore, soil management system is needed in urban parks and green spaces around those areas. Among Cambium Electric Resistance classified by locations of urban parks and open spaces, one in the costal area was the lowest. The Cambium Electric Resistance in the industrial area was the highest. Therefore, soil condition and locational environment in the industrial area are highly related to the Cambium Electric Resistance. Among the factors, which affect Cambium Electric Resistance in different locations, inorganic content was found to be the main factor in all of the study sites. Inorganic content was an important factor to the Cambium Electric Resistance in study sites located in industrial and central business districts. In the study sites located in costal area, Soil acidity was found to be other important factors that affect Cambium Electric Resistance. To improve the soil acidity, soil buffering ability should be improved from activating microorganisms in the soil by using lime and organic material, Since it takes a long time to make a change in the soil structure, well planed maintenance system is required by mid-term or long-term plans.

• Elastomers and Composites
• /
• 제52권2호
• /
• pp.136-142
• /
• 2017

Using various compositions of thermally conductive inorganic fillers with boron nitride (BN) and aluminum oxide ($Al_2O_3$), solventless UV-curable thermally conductive acrylic pressure sensitive adhesives (PSAs) were prepared. The base of the PSAs consists of 2-ethylhexyl acrylate, 2-hydroxyethyl acrylate, and isobornyl acrylate.The compositions of the thermally conductive inorganic fillers were 10, 15, 20, and 25 phr in case of BN, and 20:0, 15:5, 10:10, 5:15, and 0:20 phr in case of $BN/Al_2O_3$. The adhesion properties like peel strength, shear strength, and probe tack, and the thermal conductivity of the prepared PSAs were investigated with different thermally conductive inorganic filler contents. There were no significant changes in photo-polymerization behavior with increasing BN or $BN/Al_2O_3$ content. Meanwhile, the conversion rate and transmittance of the PSAs decreased and their thermal stabilities increased with increasing BN content. Their adhesion properties were also independent of the BN or $BN/Al_2O_3$ content. The dispersibility of BN in the acrylic PSAs was better than that of $Al_2O_3$ and it ranked the thermal conductivity in the following order: BN > $BN/Al_2O_3$ > $Al_2O_3$.

• 폴리머
• /
• 제37권2호
• /
• pp.184-195
• /
• 2013

아크릴 점착테이프는 자동차, 전기전자 및 디스플레이 모듈 접합에 사용된다. 본 연구는 이러한 모듈 접합에 사용되는 고강도 준구조형 점착테이프 제조를 위해 2-ethylhexylacrylate(2-EHA)와 acrylic acid(AAC)를 사용하여 UV 조사에 의한 광중합 및 점착테이프 제조를 위해 광경화를 진행하였고, AAC의 함량 및 무기물 충전제 $SiO_2$ 함량에 따라 아크릴 점착테이프의 물성에 미치는 영향을 고찰하였다. 공단량체로 사용된 AAC의 함량이 많을수록 아크릴고분자 사슬의 강직성이 증가하여 초기 점착력이 낮았고, 시간경과에 따라 점착력이 증가하였으며 테이프의 젖음성, 접촉각 및 SEM 이미지를 통해 확인할 수 있었다. 충전제를 첨가하지 않은 점착테이프의 박리강도와 전단접착강도는 반비례 관계였으나 충전제를 첨가하면 함량 증가에 따라 박리강도 증가와 함께 전단접착강도가 증가하는 비례관계를 보였다. 이러한 상관관계로부터 고강도 준구조형 접착물성을 필요로 하는 용도에 최적화된 아크릴 점착테이프를 제시할 수 있었다.

• Fibers and Polymers
• /
• 제2권3호
• /
• pp.135-140
• /
• 2001

Organic-inorganic hybrid composites consisting of poly(vinylidene fluoride) (PVDF) and SiO$_2$ were prepared through a sol-gel process and the crystallization behavior of PVDF in the presence of $SiO_2$ networks was investigated by spectroscopic, thermal and x-ray diffraction measurements. The hybrid composites obtained were relatively transparent, and brittleness increased with increasing content of tetraethoxysilane (TEOS). It was regarded from FT-lR and DSC thermal analyses that at least a certain interaction existed between PVDF molecules and the $SiO_2$ networks. X-ray diffraction measurements showed that all of the hybrid samples had a crystal structure of PVDF ${\gamma}$-phase. Fresh gel prepared from the sol-gel reaction showed a very weak x-ray diffraction peak near 2$\theta$=$21^{\circ}$ due to PVDF crystallization, and Intensity increased grade-ally with time after gelation. The crystallization behavior of PVDF was strongly affected by the amount of $SiO_2$ networks. That is, $SiO_2$ content directly influenced preference and disturbance fur crystallization. In polymer-rich hybrids, $SiO_2$ networks had a favorable effect on the extent of PVDF crystallization. In particular, the maximum portent crystallinity of PVDF occurred at the content of 3.7 wt% $SiO_2$ and was higher than that of pure PVDF. However. beyond about 10 wt% $SiO_2$, the crystallization of PVDF was strongly confined.

• 생약학회지
• /
• 제34권1호통권132호
• /
• pp.40-44
• /
• 2003

Antler has been used as one of the important traditional oriental medicines for many years. It contains many biochemical components including lipids, peptides, carbohydrates, and inorganic substances. The various biological activities of antler are being considered owing to such biochemical components. The purpose of this research is to compare the biochemical components of antlers after treatment of three different kinds of fodder. They are mulberry (group A), Lycii Fructus (group B) and the complex of herbs (group C). The chemical composition of each antler was determined in three sections (top, middle, and bottom) and compared with those of the control. The contents of sialic acid, uronic acid and glycosaminoglycans increased in the top antlers of the group B. Total lipids content increased in the top antlers of all groups (A, B, and C). The concentration of inorganic ions (Ca, Mg, and P) decreased in all groups. Fattyacid composition was also analyzed by GC-MS and expressed as percentage of total fatty acid concentration. The content of palmitic acid decreased in all groups. The content of 2-hydrox-yhexadecanoic acid, which has not been reported in aster, increased in the top antlers of all groups. These results suggest that the treatment of special fodder may affect the composition of the biochemical components of antlers.

• Asian Journal of Atmospheric Environment
• /
• 제4권1호
• /
• pp.55-61
• /
• 2010

The sensitivity of aerosol light extinction coefficient to the aerosol chemical composition change is estimated by (1) calculating the aerosol water content and chemical concentrations by a gas/particle equilibrium model and (2) calculating the aerosol light extinction coefficient by a Mie theory based optical model. The major chemical species are total (gas and particle phase) sulfuric acid, total nitric acid, and total ammonia which are based on the measurement data at Seoul and Gosan. At Seoul, since there were enough ammonia to neutralize both total sulfuric acid and total nitric acid, the dry ionic concentration is most sensitive to the variation of the total nitric acid level, while the total mass concentration (ionic concentration plus water content) and thus, the aerosol light extinction coefficient are primarily determined by the total sulfuric acid. At Gosan, since the concentration of ambient sulfuric acid was the highest among the inorganic species, sulfate salts determined aerosol hygroscopicity. Thus, both ionic and total mass concentration, and resultant aerosol light extinction coefficient are primarily determined by the sulfuric acid level.