• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.362-366
• /
• 2011

Aluminosilicate inorganic polymer binder has been studied as an alternative to ordinary Portland cement due to its higher physical properties, chemical resistance and thermal resistance. This study has been carried out in an attempt to understand the hardening characteristics of aluminosilicate binder by varying the content of calcium. Samples with four different ratios of Al, Si, and Ca were synthesized in this study with the Al:Si:Ca mol ratio being 1.00:1.85~1.98:0.29~2.12. Furthermore, an alkali silicate solution was prepared with the sodium hydroxide (NaOH) and sodium silicate (NaSi). The hardening characteristics of the specimens were analyzed using XRD, SEM, and TG/DTA. In addition, compressive strength and sintering time of specimens were measured as a function of calcium content. The results showed that the specimen containing 2.12 mol% calcium offered the highest compressive strength. However, the compressive strength of the specimen containing 0.26 mol% calcium was lower relative to the other specimens. The results displayed a distinct tendency that as more calcium was added to the inorganic polymer, setting time became shorter. When calcium was added to the inorganic polymer structure, a second phase was not formed, indicating that the addition of calcium does not affect the crystalline structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.78-83
• /
• 2001

In this work, the surface of inorganic fillers were modified with some functional groups such as stearic acid, aliphatic long chain, vinylsilane and aminosilane to control the interaction between inorganic fillers and polymer matrix. Ethylene-vinyl acetate copolymers (EVA) with various amount of vinyl-acetate content and copolyether-ester elastomer were used as polymer matrix. The addition of inorganic fillers increases flame retardancy, but results in steep drop of electrical and mechanical properties, which may be caused by the defect in the interface between organic/inorganic hybrid composites. The hybrid composites are found to show better mechanical properties and higher volume resistivities as inorganic fillers are well dispersed and have good adhesion with polymer matrix. Also, the most effective type of functional group coated on fillers depends on the chemical structure of polymer.

• The Korean Journal of Ceramics
• /
• 제6권4호
• /
• pp.385-389
• /
• 2000

Residual stresses in epitaxial films were measured by X-ray diffraction method. Lattice strains of the (hkl) planes measured along particular Ψ-angles were converted to the in-plane stress according to the equation of stress-strain tensor conversion. Residual tensile stresses were observed in epitaxial PbTiO$_3$ films deposited on (100) SrTiO$_3$ substrate. Tensile stresses approximately 0.9 GPa were measured in Pb-rich films, while it increased to approximately 2.0 GPa with the decreasing of Pb content in the case of Pb-poor films, which ascribed to the formation of lead and oxygen vacancies (expressed as x in Pb$_1-x$TiO$_3-x$).

• 한국약용작물학회지
• /
• 제19권6호
• /
• pp.501-507
• /
• 2011

This experiment was carried out in order to collect the basic data on the standardization of the manufacturing process of Rehmannia glutinosa Libosch. var. purpurea Makino drying. By the drying methods of R. glutinosa, the content of water, inorganic components, reducing sugar, catalpol and benzo[${\alpha}$]pyrene were investigated. The water content was 15.6~17.2% when R. glutinosa was dried by cold-warm air moisture absorption drying method (CAMAD) at $60^{\circ}C$ during 6 days. Among of the inorganic components of R. glutinosa the K content was the most followed by P, Na, Ca and Mg. The reducing sugar content of R. glutinosa by the hot air drying method (HAD) was much more than that by the CAMAD. The catalpol content of R. glutinosa was not different by the drying temperature when it was dried by the CAMAD. The catalpol content of the large size tuber (about 50.0 g/unit) showed a tendency to increase from $60^{\circ}C$ until $70^{\circ}C$ drying temperature, but that of the small size tuber(about 4.0 g/unit) was decreased as being a trend as the drying temperature high when R. glutinosa was dried by the HAD, But the catalpol content R. glutinosa had a tendency to drop significantly at drying temperature above $80^{\circ}C$. The benzo[${\alpha}$]pyrene content was little detected when R. glutinosa was dried by both the SLD and the CAMAD, and the sampling by the HAD indicated within the scope of 5 ${\mu}g/kg$ which was the scope to regulate by Korean food and drug administration. In conclusion, it seemed that an appropriate drying temperature of R. glutinosa by the CAMAD and the HAD was about $60^{\circ}C$ and about $70^{\circ}C$, respectively, when we consider the catalpol content and benzo[${\alpha}$]pyrene detection in the manufacturing process of drying R. glutinosa.

• 대한환경공학회지
• /
• 제34권10호
• /
• pp.651-655
• /
• 2012

본 연구에서는 천연 무기소재로부터 합성된 무기개량제의 슬러지 탈수능 개선 효과를 상용 유기고분자응집제와 비교 평가하였다. 2.0 mg/g sludge TS의 주입량에서 무기개량제는 여과시간, 여과비저항계수, 탈수케이크 함수율, 탁도를 각각 146에서 41초로, $8.3{\times}10^{14}$에서 $2.4{\times}10^{14}$ m/kg로, 82.1에서 77.1%로, 112에서 61.1 NTU로 향상시켰으며, 이는 상용 양이온 유기고분자 응집제에 필적하는 성능이었다. 따라서 무기개량제를 하수슬러지의 대체 개량제로서 활용 가능할 것으로 판단된다. 각 탈수능 성능지표 간의 상호 관계를 분석한 결과, 여과시간, 여과비저항계수, 탈수케이크 함수율 간에 강한 상호관계가 확인되었다.

• 한국식품위생안전성학회지
• /
• 제15권4호
• /
• pp.344-350
• /
• 2000

본 연구는 가공식품 중 상용식품이라 할 수 있는 청량음료류와 현재 건강식품으로 많이 섭취되고 있는 홍삼음료의 무기 금속 함량을 분석하고 섭취 수준을 추정해 봄으로써 영양학적, 보건학적 평가의 기초자료로 사용하고자, 2000년 3월에서 9월말까지 서울시내 대형 유통 매장에서 판매 중인 청량음료 및 홍삼음료 총 16종 80건을 채취하여 철(Fe), 칼슘(Ca), 아연(Zn), 나트륨(Na), 마그네슘(Mg), 칼륨(K) 함량을 측정하였다. 과채음료의 경우 전반적으로 다양한 무기 금속들이 다량 함유되어 있었으며, 혼합음료 및 탄산음료의 경우 나트륨 함량이 칼륨 함량보다 높은 것에 비해 칼륨 함량이 높게 나타났는데, 이는 주로 오렌지, 사과, 토마토 등 원료에 기인된 것이었다. 칼슘 함량의 경우 키토산이 함유된 일부 혼합음료에서 매우 높게 나타났는데, 칼슘은 뼈의 성장과 골다공증의 예방, 고혈압, 동맥경화의 예방에 효과가 있는 것으로 밝혀져 섭취가 장려되고 있으나, 뇨 결석등 일부 질환에 있어서는 주의가 요구된다. 또한 어린이 및 청소년층이 주 소비계층인 탄산음료의 경우 습관성 음용으로 인한 칼슘과 인 섭취의 불균형이 성장에 저해를 초래할 수 있으며, 철, 구리, 아연 등 다른 무기 금속의 흡수에도 영향을 미치므로 이에 대한 보다 구체적인 연구가 필요할 것으로 생각된다.

• 한국도로학회논문집
• /
• 제7권1호
• /
• pp.21-29
• /
• 2005

건설폐기물의 재활용방법 중 하나는 폐콘크리트 재생골재를 도로포장재료로 활용하는 것이다. 하지만 재생골재에 대한 많은 연구와 기술개발에도 불구하고 생산공정에 포함된 이물질 때문에 실제 도로포장재료로의 적용은 미비한 실정이다. 본 연구에서는 재생골재내에 포함된 이물질의 특성에 따라 무기이물질과 유기이물질로 구분하였으며 , 각 이물질이 포장 공용성에 미치는 영향을 제시하였다. 또한 재생골재내에 포함된 무기이물질 함유량과 압축강도와의 관계, 유기이물질 함유량과 수정 CBR과의 상관관계를 통하여 도로포장층인 린콘크리트 기층과 보조기층에 적용 가능한 이물질 함량기준을 제시하였다. 린콘크리트 기층에는 무기이물질 함유량 질량비 10% 이하, 입상재료 보조기층에는 유기이물질 함유량 부피비 2% 이하일 때 재생골재를 포장에 적용 가능한 것으로 나타났다.

• 한국축산식품학회지
• /
• 제40권3호
• /
• pp.338-349
• /
• 2020

The effects of organic Zn-L-selenomethionine (Zn-L-SeMet) at 0.3 ppm on carcass composition, meat characteristics, fatty acid composition, glutathione peroxidase activity, and ribonucleotide content were compared against the commercial inorganic sodium selenite (Na-Se) and the combination of the two, in commercial broilers. A total of 540 one day-old chicks were assigned at random to 3 dietary treatments : i) commercial inorganic selenium as control or T1, ii) a 1:1 ratio of inorganic and organic selenium as T2, and iii) organic selenium as T3. Carcass composition, meat characteristics, cholesterol content, fatty acid composition, and ribonucleotide content were generally unaffected by treatments. However, discrepancy were significantly observed in glutathione peroxidase activity (GSH-Px) and water holding capacity, with organic selenium showing higher glutathione peroxidase activity (p<0.01) and lower shrinkage loss (p<0.05), respectively. These findings could be explained by the contribution of organic selenium in bioavailability of GSH-Px. However, having conducted in a commercial close house system with sufficient amount of nutritional supplementation, the present study demonstrated little or no effects of organic Zn-L-SeMet on meat characteristics, fatty acid composition, and ribonucleotide content (flavor characteristic) in broiler chickens.

• Journal of Applied Biological Chemistry
• /
• 제59권3호
• /
• pp.261-264
• /
• 2016

In soybean (Glycine max (L.) Merr.) seeds, phosphorus (P) is primarily stored in the form of phytate, which is generally indigestible by monogastric animals such as human, pig, poultry, and fish. Thus, this study was conducted to isolate soybean mutants with high available P. Inorganic P content was assessed in a total of 1,266 ethyl methanesulfonate (EMS) $M_4$ lines from the Pungsannamul cultivar. Among the tested lines, four EMS lines (PE379, PE432, PE2205, and PE2503) showed higher mean inorganic P ($1.21-1.56gkg^{-1}$) than did the Pungsannamul cultivar ($0.90gkg^{-1}$). Additionally, six EMS lines (PE718, PE828, PE1466, PE1552, PE3378, and PE3386) showed lower mean inorganic P ($0.38-0.60gkg^{-1}$). The high inorganic P mutants isolated in this study will be further investigated for phytate and total P levels. Moreover, the high and low inorganic P lines will be utilized in a future study of the biochemical pathway of phytate.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.460-465
• /
• 2013

Plate-shaped inorganic particles are coated onto a stainless steel substrate by the electrophoretic deposition of a precursor slurry which includes the inorganic particles of $Al_2O_3$ and polymer resin in mixed solvents to mimic the abalone shell structure, which is a composite of plate-shaped inorganic particles and organic interlayer binding materials with a layered orientation. The process parameters of the electrophoretic deposition include the voltage, coating time, and conductivity of the substrate. In addition, the suspension parameters are the particle size, concentration, viscosity, conductivity, and stability. We prepared an organic-inorganic composite coating with a high inorganic solid content by arraying the plate-shaped $Al_2O_3$ particles and electrophoretic resin via an electrophoretic deposition method. We analyzed the effect of the slurry composition and the electrophoretic deposition process parameters on the physical, mechanical and thermal properties of the coating layer, i.e., the thickness, density, particle orientation, Young's modulus and thermogravimetric analysis results.