• 한국재료학회지
• /
• 제23권5호
• /
• pp.293-298
• /
• 2013

In this study, an HP-mod. type(KHR-45A), which is used as a heater tube material in the pyrolysis process, was evaluated for its carburizing properties. It was confirmed from the microstructural observation of the tubes that the volume fraction of carbide increased and that the coarsening of Cr-carbide generated as a degree of carburization increased. The depth of the hardened layer, which is similar to the thickness of the carburized region of each specimen, due to carburization is confirmed by measurement of the micro-Vickers hardness of the cross section tube, which thickness is similar to that of the carburized region of each specimen. Two types of chromium carbides were identified from the EBSD (electron back-scattered diffraction) image and the EDS (energy-dispersive spectroscopy) analysis: Cr-rich $M_{23}C_6$ in the outer region and Cr-rich $M_7C_3$ in the inner region of tubes. The EDS analysis revealed a correlation between the ferromagnetic behavior of the tubes and the chromium depletion in the matrix. The chromium depletion in the austenite matrix is the main cause of the magnetization of the carburized tube. The method used currently for the measurement of the carburization of the tubes is confirmed; carburizing evaluation is useful for magnetic flux density measurement. The volume fraction of the carbide increased as the measuring point moved into the carburized side; this was determined from the calculation of the volume fraction in the cross-section image of the tubes. These results are similar to the trends of carburization measurement when those trends were evaluated by measurement of the magnetic flux density.

• 대한수의학회지
• /
• 제35권1호
• /
• pp.1-9
• /
• 1995

The development of omasum in fetuses between 60, 90, 120 days of gestation and neonates of Korean native goats was investigated by fight; scanning electron microscopy. The results were summarized as follows : 1. In the 60-day-old fetuses, the stomach was developed and differentiated into four compartments of rumen, reticulum, omasum, and abomasum. The mucosa of the omasum was thrown into folds which appeared to be three or four different orders of large, medium, small, and smallest laminae. 2. In the 90-day-old fetuses, the omasal laminae had increased greatly in length and cores of omasal laminae were invaginated laterally. 3. In the 120-day-old fetuses, the wall of the omasal laminae had increased in length and the lamina epithelialisis had slightly increased in thickness. The lateral invaginations at the dark zone had increased in length and depth. The tunica muscularis increased only slightly in thickness particularly within its inner circular layer. 4. In the neonate, the muscularis and the omasal laminae had increased in thickness. The lateral invaginations of the dark zone were observed in the first, second and third order of omasal laminae. 5. Scanning electron microscopic studies : In the 90-day-old fetuses, numerous microvilli and microridges were observed on the luminar surface of the omasal mucosa. The omasal papillae were already formed at 120 days of gestation. In the I20-day-old fetuses omasal papillae liked nipple shape. In the neonate, the omasal papillae liked the thumb.

• 한국해양학회지
• /
• 제13권2호
• /
• pp.17-25
• /
• 1978

우리 나라에서의 연안수질조사나 해양특성조사는 현재까지 단편적으로 이루어진 것이 상당히 많다. 해방전에 조사된 것을 제외하면 1960년대 전반까지는 조사된 것이 별로 없으나 후반에 들어와서는 원(1963,1964), 박과 김(1967), 장과 배(1968), 박 등(1969), 이 등(1969)의 양식장주변을 위주로 한 조사가 시작되었으며, 경제성장과 때를 같이하여 1970년대 전반에 들어와서는 원과 박(1970), 김(1970), 원(1970), 최 등(1970), 최와 정(1971), 홍 등(1971), 강(1972), 최와 정(1972), 황 (1972), 원과 박(1973), 김 등((1974), 이 등 (1974), 노 등 (1975), 곽과 이(1975) 박(1975a,b), 곽(1976, 1977) 등 연안수질의 현황에 대하여 집중적으로 조사가 행해졌다. 그러나 어떤 한 해역에 있어서의 해양학적 특성이나 영양염 또는 중금속을 조사했ㅇ르 뿐 그 이외의 해역을 같은 계절에 조사해서 비교 분석한 사실은 거의 없다

• 한국표면공학회지
• /
• 제53권2호
• /
• pp.72-79
• /
• 2020

Two Fe-Cr steels of T22 steel and STS430 steel were corroded at 650 and 750℃ for 100hr in sewage sludge-(0.3% SO₂-6% O₂-10% H₂O-balance CO₂) mixed gas environment. T22 steel corroded faster than STS430, indicating that the Cr content significantly influence the corrosion rates. T22 formed thick and non-protective Fe₂O₃ as the major oxide and Fe₃O₄ as the minor one. With an increase in corrosion temperature, their corrosion rates increased, being accompanied with formation of pores and cracks in the thickened oxide scales that were non-adherent. STS430 steel formed Fe₂O₃, Fe₃O₄ as the outer scale and (Fe, Cr)-O as the inner layer by which its corrosion rate is greatly reduced. Both the T22 and STS430 steel samples formed multi-layered scales by outward diffusion of Fe ions and inward diffusion of oxygen and sulfur ions at high-temperature more than 650℃.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.1-4
• /
• 2007

This study investigated the applicability of insulation curing method with double layer bubble sheets to the man concrete subjected to cold weather. Temperature history of the mass concrete indicated that the highest temperature of center section was exhibited at $34^{\circ}C$ while the that of surface section was $25^{\circ}C$. Difference between center and surface was shown to be less $10^{\circ}C$ when the temperature of center section was peak section, and thereby associated temperature cracking index was calculated 1.5, and occurrence probability of temperature cracking was 5%, so there was no temperature cracking caused by internal restraint. No temperature crack was observed by naked eye. It was clear that early frost demage and temperature cracking could be restrained due to reducing temperature difference between inner part and outside in the case double bubble sheets applied to insulation curing method in cold weather. The maturity of mass concrete is higher than outside about $72\sim89^{\circ}$ DD, so it was demonstrated to prevent early frost demage and ensure strength excellently. Insulation curing method with double bubble sheets was more economic than heating curing method.

• 한국패류학회지
• /
• 제5권1호
• /
• pp.1-9
• /
• 1989

A scanning electron microscopic study on the glochidium and glchidial encystment of Anodonta grandis on the guppy was conducted. The shape of the glochidium is apparently triangular and its averge size is 0.45mm X0.4mm when closed, The two glochidial shell valves are of the same size, kept together by a ligament of 120${\mu}{\textrm}{m}$ in length and 7 ${\mu}{\textrm}{m}$ in width. Each of the glochidial shell valves has a 16 ${\mu}{\textrm}{m}$ long hook sitdded with many spines on the superior face. A large area to the apex of the valve surrounding the base of the hook is provided with numerous small spines which become progressively smaller towards the periphery of the area, The external surface of the glochidial shell valve is covered with numerous small processes showing successive change in the shape and the pattern of destribution by part. Besides the processes, there are a number of niches scattered all over the exterior surface. The glochidial shell valve has two layers. One is the outer thin membrane bearing the processes and the niches and the others is the inner layer bearing numerous holes which any accessory structure and 2.65 ${\mu}{\textrm}{m}$ in diameter, emerges from a canal located at center of ventral plate of the mamtle, A total of three types of the hair cells are observed. In present artificial infection of the glochidium to the guppy, it took about three to four hours to complete an early cysts, During the period of encystment, The epithelial cells of the host fish actively migrated toward the attached glochidium and covered it.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.576-581
• /
• 2010

KAERI (Korea Atomic Energy Research Institute) fabricated MOX (Mixed Oxide) fuel pellets as a cooperation project with PSI (Paul Scherrer Institut) for an irradiation test in the Halden reactor. The MOX pellets were fitted into fuel rods that included instrumentation for measurement in IFE (Institutt for Energiteknikk). The fuel rods were assembled into the test rig and irradiated in the Halden reactor up to 50 MWd/kgHM. The irradiated fuel rods were transported to the IFE, where ceramography was carried out. The fuel rods were cut transversely at the relatively higher burn-up locations and then the radial cross sections were observed. Micrographs were analyzed using an image analysis program and grain sizes along the radial direction were measured by the linear intercept method. Radial cracks in the irradiated MOX were observed that were generally circumferentially closed at the pellet periphery and open in the hot central region. A circumferential crack was formed along the boundary between the dark central and the outer regions. The inner surface of the cladding was covered with an oxide layer. Pu-rich spots were observed in the outer region of the fuel pellets. The spots were surrounded by many small pores and contained some big pores inside. Metallic fission product precipitates were observed mainly in the central region and in the inside of the Pu spots. The average areal fractions of the metallic precipitates at the radial cross section were 0.41% for rod 6 and 0.32% for rod 3. In the periphery, pore density smaller than 2 ${\mu}m$ was higher than that of the other regions. The grain growth occurred from 10 ${\mu}m$ to 12 ${\mu}m$ in the central region of rod 6 during irradiation.

• 대한화장품학회지
• /
• 제40권3호
• /
• pp.259-268
• /
• 2014

최근 여러 가지 비침습적인 방법으로 피부조직의 생검 또는 조직학적 처리과정 없이 피부의 실시간 이미지를 이용한 연구가 가능해졌다. Confocal scanning laser microscope (CSLM) 이미지는 830 nm의 근적외선 파장을 사용하는 비침습적 방법으로 피부의 내부 구조를 이미지화할 수 있으며, CSLM을 이용한 연구를 통해 비침습적인 피부 측정법으로 색소 침착 부위의 기저층과 진피 유두 사이에서 melanin cap, papillary ring과 같은 지표가 뚜렷하게 관찰된다고 보고되었다. 본 연구에서는 scanning probe image processor (SPIP)소프트웨어를 사용하여 CSLM 디지털 이미지 정량 분석을 처음 시도하였으며 본 연구결과는 정성적 피부조직 이미지 데이터를 정량화함으로써 향후 CSLM 활용범위를 높이게 될 것으로 기대하고 있다.

• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.174-180
• /
• 2012

In this study, the feasibility of spectral domain optical Doppler tomography for measuring blood flow characteristics in a micro-tube was demonstrated through several experiments. The use of an SD-ODT system in blood flow measurement can provide high resolution images (5 microns resolution). We prepared three capillary tubes to reveal the effect of different concentrations of hematocrit ratio (HR). One tube serves as the control. The two other tubes contained different concentrations of HR (5%, 25%). Three different capillary tube inlet flow velocities were tested in the present study. The Reynolds number (Re) which is based on the capillary tube inner diameter ranges from Re=6 to 48. We calculated a Doppler shift of the power spectrum of the temporal interference fringes with Kasai autocorrelation function to achieve the velocity profile of the flow. As a result, SD-ODT systems could not detect the cell depletion layer in the present study due to the limitation of spatial resolution. Nevertheless, these systems were proven to be capable of observing the RBCs of blood.

• 복식문화연구
• /
• 제25권6호
• /
• pp.880-892
• /
• 2017

In this study, the appearance change and the heat moisture transfer properties of knitted fabric by yarn shrinkage were examined to obtain useful data on the development of thermo-sensitive functional materials. Eleven types of knitted fabric were knitted using highly bulky acrylic-blended yarn. After shrinking the specimens using dry heat treatment, the appearance change and thickness were measured. An HEC simulator was adopted for measuring the heat moisture transfer properties of specimens by yarn shrinkage. When holes were arranged vertically in the mesh structure, the specimens with 2,500 and 5,000 holes showed high percent change of hole area, appearance, and thickness. When holes were diagonally arranged in the mesh structure, the percent change of hole area in the specimen with 1,250 holes was larger than the one with 2,500 holes. However, the dimensional stability of the specimen with 2,500 holes was better because of its smaller appearance and thickness change. In the tuck structure, the percent change of hole area in the specimen with 625 and 416 holes was relatively large compared with the appearance and thickness change. Furthermore, the hole size in the tuck structure was smaller than that in the mesh structure but the percent change of hole area was larger. Therefore, it was proved that the tuck structure is more suitable than the mesh structure for developing thermo-sensitive functional materials. Heat moisture transfer property test verified that the change of hole area by yarn shrinkage enabled obtaining the thermal effect due to the distinct temperature difference in the inner layer.