Browse > Article
http://dx.doi.org/10.5695/JKISE.2020.53.2.72

Study of High Temperature Corrosion Behavior of Fe-Cr Steel in Sewage Sludge-(SO2-O2-H2O-bal. CO2) mixed Gas Environment  

Kim, Min Jung (School of Advanced Materials Science and Engineering, Sungkyunkwan University)
Park, Joo Chang (Department of Energy Systems Research, Ajou University)
Ryu, In Sun (3 Department of Advanced Material, Korea polytechnic)
Publication Information
Journal of the Korean institute of surface engineering / v.53, no.2, 2020 , pp. 72-79 More about this Journal
Abstract
Two Fe-Cr steels of T22 steel and STS430 steel were corroded at 650 and 750℃ for 100hr in sewage sludge-(0.3% SO2-6% O2-10% H2O-balance CO2) mixed gas environment. T22 steel corroded faster than STS430, indicating that the Cr content significantly influence the corrosion rates. T22 formed thick and non-protective Fe2O3 as the major oxide and Fe3O4 as the minor one. With an increase in corrosion temperature, their corrosion rates increased, being accompanied with formation of pores and cracks in the thickened oxide scales that were non-adherent. STS430 steel formed Fe2O3, Fe3O4 as the outer scale and (Fe, Cr)-O as the inner layer by which its corrosion rate is greatly reduced. Both the T22 and STS430 steel samples formed multi-layered scales by outward diffusion of Fe ions and inward diffusion of oxygen and sulfur ions at high-temperature more than 650℃.
Keywords
Sewage Sludge; Corrosion; $P_2O_5$; Oxidation; Diffusion;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 D. Philippe, W. Katia, R. Belkacem, M. Gerard, B. Ray, B. Michelle, L. Stephane, B. Pascal, Austenitic steel corrosion in IGCC environment: Characterisation by photon and nuclear microprobes, Nucl. Instr. Meth. A, 181 (2001) 734-738.   DOI
2 G. G. Olkhovskii, Solid fuel gasification in the global energy sector (a review), Ther. Eng., 62 (2015) 465-472.   DOI
3 T. Y. Chae, J. W. Lee, Y. J. Lee, W. Yang, Study on the Co-firing of Sewage Sludge to a 80kWthscale pulverized coal combustion system, Clean Tech., 25 (2019) 74-80.   DOI
4 E. K. Hong, D. K. Chae, H. Y. Heo, A study on evaluation of boiler thermal performance change characteristics with sewage sludge combustion on coal fired power plant, Conf. Proc. Kor. Soc. Energy Eng., (2010) 139-144.
5 A. Holt, P. Kofstad, High temperature corrosion of iron in $O_2$+4% $SO_2/SO_3\;at\;500-800^{\circ}C$, Mater. Sci. Eng. A, 120-121 (1989) 101-104.   DOI
6 W. Wu, Y. Niu, J. T. Guo, Y. Zhang, Sulfate induced corrosion behavior of FeAl intermetallic compound in $O_2$-0.5%($SO_2+SO_3$) atmosphere at $600-870^{\circ}C$, High Temperature Corrosion of Advanced Materials and Protective Coatings, 1st Ed., North Holland (1992) 301-307.
7 K. H. Jung, S. J. Kim, Corrosion and strength degradation characteristics of 1.25Cr-0.5Mo steel under $SO_2$ gas environment, J. Kor. Inst. Surf. Eng., 51 (2018) 149-156.   DOI
8 H. Kassman, L. Bafver, L. E. Amand, The importance of SO2 and SO3 for sulphation of gaseous KCl-an experimental investigation in a biomass fired CFB boiler, Combust Flame, 157 (2010) 1649-1657.   DOI
9 J. Pettersson, C. Pettersson, N. Folkeson, L. G. Johansson, E. Skog, J. E. Svensson, The influence of sulphur additions on the corrosive environment in a waste-fired CFB boiler, Mater. Sci. Forum, (2006) 563-570.
10 B. A pint, J. R. Martin, L. W. Hobbs, The oxidation mechanism of $Al_2O_3$ scales, Solid State Ionics, 78 (1995) 99-107.   DOI
11 Y. F. Zhou, J. S. Li, J. X. Lu, C. Cheeseman, C. S. Poon, Recycling incinerated sewage sludge ash (ISSA) as a cementitious binder by lime activation, J. Cleaner Prod., 244 (2020) 1-9.
12 H. H. Lee, J. E. Lee and J. G. Sohn, A study on the non - heating cement to solidify sewage sludge with by-products of Iron & steel work, RIST research report, 16 (2002) 147-154.
13 A. Yousef, T. Annika, H. Pamela, N. Rikard, The effect of co-firing sewage sludge with used wood on the corrosion of an FeCrAl alloy and a nickelbased alloy in the furnace region, Fuel Proc. Tech., 138 (2015) 805-813.   DOI
14 S. Karlsson, L. E. Amand, J. Liske, Reducing high-temperature corrosion on high-alloyed stainless steel superheaters by co-combustion of municipal sewage sludge in a fluidised bed boiler, Fuel 139 (2015) 482-493.   DOI
15 Y. S. Lee, Intergranular corrosion of stainless steel, Corro. Sci. Tech., 17 (2018) 183-192.
16 S. K. Kim, D. B. Lee, Effect of Al and Cr contents on the high temperature oxidation- and sulfidation-resistance of Fe alloys, Kor. Inst. Surf. Eng., 45 (2012) 61-69.   DOI
17 H. J. Jang, C, J. Park, Effects of alloying elements on the corrosion resistance of (16-19)Cr ferritic cast stainless steel for automotive exhaust parts, Conf. Proc. Kor. Soc. Automotive Eng., (2011) 19-25.
18 S. Y. Lee, Y. S. Kim, H. R. Jeong, S. H. Ahn, K. W. Nam, Corrosion resistance characteristics of Cr-free coating solution for degraded STS316L, Kor. Soc. Ocean Eng., 29 (2015) 475-480.
19 Technical Committee ISO/TC 156, Corrosion of metals and alloys -Method for metallographic examination of samples after exposure to hightemperature corrosive environments, ISO 26146, (2012).
20 N. Birks, G. H. Meier, and F. S. Pettit, Introduction to High Temperature Oxidation of Metals, 2nd Ed., Cambridge Univ. (2006).
21 A. S. Khanna, Introduction to high temperature oxidation and corrosion, ASM international (2002).
22 D. Young, High Temperature Oxidation, and Corrosion of Metals, Elsevier, Amsterdam (2008).