• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.160-166
• /
• 2005

In recent, recreational vehicles, which efficiently provide wide inner space for various utilities, are highly preferred in automobile market. Though those vehicles enable to load much luggage in space behind the last seat, in case of frontal impact with high velocity the luggage strongly collides into the seat back and the passengers in. the last seat could be severely injured. Therefore, high strength against luggage intrusion is required for the last seat, and it is regulated by law of ECE R17. In this study, for a recreational vehicle under developing, an analysis technique for simulating seat crash in accordance with luggage intrusion test of ECE R17 was investigated. The results exhibited good correlation with the test ones.

• Journal of Industrial Convergence
• /
• v.3 no.1
• /
• pp.101-123
• /
• 2005

This article focused on all that matter that effect brand switching. For that we selected college students especially live inner city and outskirts of Seoul. also this empirical study limits sample to female only. The reason is this study will only concentrate on the usage of cosmetics that for basic skin care products. we presume the brand switching factors would be advertising satisfaction of product, promotion, anecdotal effect of gods, corporate image and brand image. The results shows our study frame was apparently accurate. we expect the finding about brand switching on this article gives some weighted clues to establish brand switching marketing strategies. Because our study deals with new tendencies of the newest generation that use basic skin care products.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.157-167
• /
• 2020

The purpose of this study is to analyze the relationship between the occurrence of intermediate peak and time duration, and to conduct a review for the causes of the intermediate peak. In this test, ice impact tests were conducted using a bow side shell frame and ice specimen. A total of 70 samples were manufactured. Two types of ice specimen with relatively different surface conditions were used. The criterion for dividing the two types of ice specimen was the different exposure times to room temperature after freezing. This experiment was conducted for each parameter in order to reproduce the actual icebreaking situation. As a result of the analysis, the intermediate peak in the ice load signal have been found to be caused by mechanisms by which the inner surface of broken ice contact with hull immediately after the initial hitting point of ice has been broken.

• KIEAE Journal
• /
• v.17 no.1
• /
• pp.69-75
• /
• 2017

Purpose: Heat transfer analysis of recently developed 'slim type double-skin system window' were presented. This window system is designed for curtain wall type façade that main energy loss factor of recent elegant buildings. And the double skin system is the dual window system integrated with inner shading component, enclosed gap space made by two windows when both windows were closed and shading component effectively reflect and terminate solar radiation from outdoor. Usually double-skin system requires much more space than normal window systems but this development has limited by 270mm, facilitated for curtain wall façade buildings. In this study, we estimated thermophysical phenomena of our double-skin curtain wall system window with solar load conditions at the summer season. Method: A fully 3-Dimentional analysis adopted for flow and convective and radiative heat transfer. The commercial CFD package were used to model the surface to surface radiation for opaque solid region of windows' frame, transparent glass, fluid region at inside of double-skin and indoor/outdoor environments. Result: Steep angle of solar incident occur at solar summer conditions. And this steep solar ray cause direct heat absorption from outside of frame surface rather than transmitted through the glass. Moreover, reflection effect of shading unit inside at the double-skin window system was nearly disappeared because of solar incident angle. With this circumstances, double-skin window system effectively cuts the heat transfer from outdoor to indoor due to separation of air space between outdoor and indoor with inner space of double-skin window system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.84-91
• /
• 2022

This study investigated the behavior of out-of-plane skewed moment connections that were designed as IMFs, as per the Korean standards. A total of 14 finite element models were constructed with the consideration of two types (single- and double-sided connections) and four levels of skew angle (0°, 10°, 20°, and 30°). The results indicated that the skewed connections considered in this study met the acceptance criteria for IMFs given by the codes. However, the load-carrying capacities of skewed connections were decreased as the skew angle increased. For the connection with a skew angle of 30°, the peak load was noted to be 13% less and the energy dissipation capacity could be 26% less than that of non-skewed connection. In addition, because of the skewed nature, the stress distribution in the skewed beam flange near the connection was asymmetric and the stresses were concentrated on the beam inner flange. Column twisting induced by the skewed configuration was very small and negligible in the beam and column combination considered in this study.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.92-97
• /
• 2016

Spray dried $Cr_2O_3$ powder having an agglomerated structure of particles was twice treated into a plasma flame to increase its apparent density. The powder subjected to the first densification treatment did not show the entirely melted state keeping inner particle hollows, and it was fully melted after the second processing only. The powder size as a result of the second treatment decreased, and the apparent density as well as flowability were increased due to melting and surface smoothing effects. But a part of particles after the second densified treatment showed the hollow structure, especially those which were above $30{\mu}m$ in size. This densification behavior of the powder has been qualitatively discussed in terms of the thermal conductivity and inner gas pressure within aggregates exposed to the plasma flame.

• Korean Institute of Interior Design Journal
• /
• v.20 no.6
• /
• pp.218-227
• /
• 2011

Korean commercial architecture is based on two distinctive characteristics of western modern architecture: grid frame structure and free facade. However, the original facade of the building disappears as numbers of commercial advertisements and signboards representing inner programs cover up the original facade. This is a unique feature of commercial architecture in Korea which I would call the surface phenomena of Korean commercial architecture. Common criticism on this type of building is that too many and too big signboards infringe upon the original pure facade of the architecture. Underlying assumption here is that signboards and commercial ads are inessential and decorative elements simply attached to the original pure facade of modern architecture. However, in this paper, I argue that commercial decorations is an essential aspect of korean commercial architecture rather than an inessential decorative element attached later to the essential facade of architecture and that it reflects the historical specificity of cultural and architectural modernity of Korea And thus, the surface phenomena of Korean commercial architecture should not be judged based upon the aesthetic paradigms of either western modern or postmodern architecture. Rather, it can be argued that surface phenomena of Korean commercial architecture is a reflection of a modernity beyond the paradigm of western modernism and postmodernism. The agenda of Korean commercial architecture is then not simply to restrict or to control signboards on the building facades with the intention to clean up facade of the building but rather to integrate the signs and commercial ads with the structure of architectural surface.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.3
• /
• pp.125-131
• /
• 2002

In this paper, a new concatenation scheme of serial concatenated convolutional codes is proposed and the performance analyzed. In the proposed scheme, each of information and parity bits of outer code is entered into inner code through interleaver and deinterleaver. Therefore, the interleaver size is same as the length of input frame. Since the interleaver size of proposed type is reduced to half of the conventional Benedetto type, the interleaver delay time required for iterative decoding is reduced. In addition the multiplexer and demultiplexer are not used in the decoder of the proposed type, the complexity of decoder can be also reduced. As results of simulation, the performance of proposed type shows the better error performance as compared to that of the conventional Benedetto type in case of the same interleaver size. And it can be observed that the difference of BER performance is increased with the increase of Eb/No. In case of the same length of input frame, the proposed type shows almost same performance with Benedetto type despite that the interleaver size is reduced by half.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.393-403
• /
• 2021

The purpose of this study is to propose a method of designing a systematic panel survey at the institutional level to lay the foundation for data-based decision-making using vocational training teachers and instructors as the population. In this study, the target population and sampling frame, which are the main elements necessary for planning a panel survey, are proposed. Also based on expert advice and empirical data analysis, the sampling unit and sampling method taking into account the outer and inner variables are presented, comprehensively considering the representativeness of data, the efficiency and sustainability of data collection. As a result of the study, with the unit of the panel as a vocational training institution, a two-stage stratified proportional sampling plan is proposed so that the institution selected as the panel and the vocational training teachers and instructors belonging to the institution can participate in the survey. Based on this, implications for the panel survey sample design are presented.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3032-3036
• /
• 2011

Cooling type of traction motor for EMU in domestic is mostly an open type. Its system is a cooling air entered through air inlet cool down a traction motor and an hot air by traction motor get out air outlet. It is easy to cool it down but hard to maintain it. To improve an ability of maintenance, a total enclosed type traction motor is already developed and used in abroad, not an opne type. So we developed a total enclosed type traction motor which will be used in domestic and abroad EMU. We tried to reduce a weight and a size compared with the abroad one. In contrast with open type traction motors which cool off inside of motors, total enclosed motors cool down by cooling exterior frame of motors. In this case, cooling fins or air fan blowing to the exterior of motors are applied. The total enclosed type traction motor developed by us have two housing to block the foreign substance into inner of a motor and have two cooling fan to easy to reduce a heat happened at a coil. In this paper, design of a cooling structure of the total enclosed traction motor developed twice and performance verification through test will be discussed.