• 대한가정학회지
• /
• 제35권2호
• /
• pp.33-47
• /
• 1997

The purpose of the study is to examine the differences between rural and urban in the factors and the level of stress in adolescent, inner control and communication with parents. Also, It is to research the influence of environmental variables, inner control and communication with parents on adolescent's stress in sides of rural and urban. Therefore, I provide needed data in instructing students. For the data set, academic high school students in second grade in a town for rural and Su-Seung gu, Dal-Sugu, chung gu in Dae-gu for urban were chosen. The data were analyzed with the frequency, percentage, factor analysis Mean, S.D, reliability, t-test, regression in use of Spss PC+ Program. The main results are as follow. First, for rural students, stress level is displayed studies, future0affair, life-attitude, companions, self-assurance and home life in order by lower sphere. For urban students, it is displayed future-affair, studies, life-attitude, companions, self-assurance and home life in order by lower shpere. In case of rural "I don't know effective study method" is highly displayed by factors. In case of urban. "I am tired of a competitive life" is highly displayed. The mean of stress level is 3.22 for rural and 3.07 for urban. The differences between rural and urban are showed in self-assurance, studies and companions. Finally when we see the stress generally the stress level is higher in rural high school students than in urban high school students. Second, rural students are lower displayed than urban students in inner control and communication with parents. There is no difference urban students in inner control and communication with parents. There is no difference in communication with a mother. third, influential variables on stress level are inner control, communication with parents, satisfaction with companions and school life as environmental variables in sides of rural and urban. Physical condition is added for rural and sex for urban Finally we get the result that stress level is high in low inner control, poor communication with parents, bad companions and unsatisfied school life for both rural and urban. Bad physical condition for rural and female for urban are added.

• 한국인터넷방송통신학회논문지
• /
• 제13권4호
• /
• pp.201-208
• /
• 2013

본 논문은 한쪽 면이 열린 동축 공동 공진기의 경험적 설계 방법에 대한 연구이다. 공진기의 내부 도체 반경과 공진기의 내경 그리고 길이를 이용하여 설계한다. 그러나 기본 동축 선로 이론을 적용하면 내부 도체 반경과 공진기의 내경 값에 관계없이, 길이 변화에 의해서만 공진 주파수와 Q값의 특성이 달라지는 것을 알 수 있다. 따라서 내부 도체 반경과 공진기 내경 그리고 길이의 영향을 알아내고, 경험적 설계를 통해 이론값과 설계값의 오차를 줄여 최적화된 공진기 설계 방법을 제안한다. 모의실험 결과를 바탕으로 공진기의 내경은 14 mm, 내부 도체 반경은 각각 2 mm, 5 mm, 10 mm 그리고, 공진기의 길이는 8.5 mm로 제작하였다. 제작된 공진기의 공진 주파수는 6.1, 5.7, 6.5 GHz로 측정되었다. 모의실험과 제작된 공진기를 측정한 결과에 의하면, 공진기의 길이가 10 mm이하일 때는 기본 동축 전송 이론을 직접 적용하고, 10 mm이상 일 때는 계산된 공진 주파수에 0.5 GHz보정인자 값을 더함으로써 비교적 오차가 작은 한쪽 면이 열린 동축 공동 공진기를 설계 할 수 있음을 알 수 있었다.

• 한국멀티미디어학회논문지
• /
• 제21권6호
• /
• pp.649-658
• /
• 2018

In this paper, we propose a mechanical contact inner tap inspection system that can inspect the defect of the inner tap immediately after inner tap is processed within the machining center. The inspection module has the collet chuck structure, so it can mounted on the main spindle of the machining center during inspection. It was developed with a focus on inspection for tap having 20 mm depth which is primarily fabricated in automotive parts and has a double sided PCB-type control system including sensing function based on Zigbee module, micom and IR sensor for wireless transmission of measured data with low power operation, and also a battery for supplying electric power. The current consumption is 46.8mA in the inspection operation mode and 0.0268mA in the power saving mode for 3.7V of the applied power source, so that 30,000 times or more inspection can be performed with assumed 5 seconds inspection time for one tap. Experiments in test jig system and actual machining center confirm that the proposed inner tap inspection system can be applied to the batch process of simultaneous inspection after tapping in the machining center.

• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.17-22
• /
• 2006

In the manufacturing processes of semiconductor, test process is important for quality of products. In the manufacturing process of dynamic memory, memory test is more important. So, automatic test equipment(ATE) is used necessarily. But, according to increase of speed of dynamic memory operation, the rapid test equipment is needed. Impedance matching between ATE and dynamic memory is expected to be an important problem for making a rapid test equipment over 1Gbps. According to increase of speed, inner impedance of ATE also works on important parameter for test. This paper is about the method that is for impedance matching of inner impedance and coaxial cable occurring in manufacturing of ATE. We proved effects of inner impedance by electric theory and verified the method of impedance matching using computer simulation.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 춘계학술발표회 논문집
• /
• pp.9-13
• /
• 1986

• 한국멀티미디어학회논문지
• /
• 제23권2호
• /
• pp.282-292
• /
• 2020

In order to minimize casualties from marine vessel accidents that occur frequently at home and abroad, it is important to ensure the safety of the passengers aboard the vessel in the event of an accident. There is an EPIRB system as a system for disaster preparedness in the marine situation currently on the market, but there is a problem that the price is very expensive. In order to overcome the cost problem, which is a disadvantage of previous system, LoRaWAN-based communication is used. LoRaWAN communication-based vessel positioning and risk detection system based on LoRaWAN communication transmits measurement data of each module using two Beacon and GPS modules to stably perform position measurement for both indoor and outdoor situations. The rider danger situation detection system can detect the safety status of the rider using the 3-axis acceleration sensor, collect data from the rider positioning system and the rider safety status detection system, and send to server using LoRa communication. When conducting communication experiments in the long-distance maritime situation and actual communication experiments using the implemented system, it was found that the two experiments showed over 90% communication success rate on average.

• 한국위성정보통신학회논문지
• /
• 제9권2호
• /
• pp.114-118
• /
• 2014

본 논문에서는 내 부호의 복호화 방식에 따른 쇄상부호 시스템의 성능 변화를 분석한다. 내 부호의 복화화 방식으로는 오류 검출 방식과 오류 검출 및 정정 방식의 두 가지를 고려한다. 주파수 도약 대역확산 다중접속 통신시스템에 쇄상부호가 적용되었을 때 두 복호화 방식에 따른 성능을 비교하는데, 외 부호의 블록 길이가 유한한 경우와 무한한 경우에 그 성능을 분석하고 비교한다. 분석된 결과를 바탕으로 무한의 블록 길이의 경우에는 두 방식의 성능이 다중 접속자 수에 따라서 trade-off가 있음을 알 수 있고, 유한한 블록 길이의 경우에는 오류 검출 및 정정 방식의 성능이 더 우수함을 관찰하였다.

• 한국전자파학회논문지
• /
• 제18권3호
• /
• pp.282-287
• /
• 2007

원형 모양 UHF 대 역의 수동형 RFID 태그 안테나를 제안하였다. 제안된 안테나는 외부 반지름과 내부 반지름의 두 개의 파라미터 변화로 최적화 할 수 있도록 간단하게 제작하였으며, 외부 반지름과 내부 반지름의 변화에 따른 임피던스 변화를 분석하였다. 그리고 실제 제작, 측정하여 시뮬레이션 결과와 비교하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.376-379
• /
• 2001

In this paper, I design the control chip that controls inner test sequence of Logic Tester to test chip. Logic tester has the thirteen inner instructions to control test sequence in test. And these instructions are saved in memory with test pattern data. Control chip generates address and control signal such as read, write signal of memory. Before testing, necessary data such as start address, end address, etc. are written to inner register of control chip. When test started, control chip receives the instruction in start address and executes, and generates address and control signals to access tester' inner memory. So whole test sequence is controlled by making the address and control signal in tester's inner memory. Control chip designs instruction's execution blocks, respectively. So if inner instruction is added from now on, a revision is easy. The control chip will be made using FPGA of Xilinx Co. in future.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.103-106
• /
• 2000

In this paper a communication system that is not using the communication line but power line is presented. It will be very useful for an information-oriented society with tele-metering and home automation. Conventional system has a difficulty in transmitting information due to decreasing communication voltage and increasing carrier, current. Proposed idea is a special type switching amplifier system which has a low inner resistance. It can provide reactive power and dose not have low impedance between the transceivers. This new system is proposed to overcome the loss of conductor load in a PLC system.