• Journal of Sensor Science and Technology
• /
• v.33 no.1
• /
• pp.24-29
• /
• 2024

Inkjet printing technology is used to mass-produce displays and electrochemical sensors by dropping tens of pico-liters or less of specific-purpose ink through nozzles, just as ink is sprayed and printed on paper. Unlike the deposition method for vaporizing material in a vacuum, inkjet printing technology can be used for processing even under general atmospheric pressure and has a cost advantage because the material is dissolved in a solvent and used in the form of ink. In addition, because it can only be printed on the desired part, masks are not required. However, a technical shortcoming is the difficulty for commercialization, such as uniformity for forming the thickness and coffee ring effect. As sizes of devices decrease, the need to print electrodes with precision, thinness, and uniformity increases. In this study, we improved the printing and processing conditions to form a homogeneous electrode using Ag ink (DGP-45LT-15C) and applied this for patterning to fabricate a heat sensor. Upon the application of voltage to the heat sensor, the model with an extended width exhibited superior heat performance. However, in terms of sheet resistance, the model yielded an equivalent value of 21.6 Ω/□ compared to the ITO.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.529-534
• /
• 2023

Although line printing technology is capable of high-speed and large area printing, residual stresses generated during the manufacturing process can deform the feedhole, causing nozzle plate crack or ink leaks. Therefore, in this paper, we propose a new thermal inkjet print head that is robust, reliable and more suitable for line-printing. The amount of deformation of the conventional line printing head measured through the experiment was converted into an equivalent load, and the validity of the load estimation method was verified through FEA analysis. In addition, in order to minimize deformation without increasing the head size, the head structure was designed to increase internal rigidity by reinforcing the unit nozzle with a pillar or support wall or by adding a support beam or dry/wet etched bridge. The FEA analysis results show that the feedhole deformation was reduced by up to 90%, and it is confirmed that the suggested print head with dry etched feedhole bridge operates normally without nozzle plate cracks and ink leakage through fabrication.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.113-115
• /
• 2003

Droplet impinging into a cavity at micro-scale is one of important fluidic issues for microfabrications, e.g. bio-chip applications and inkjet deposition processes in the PLED panel manufacturing. The droplets generally dispensing from an inkjet head, which contains an array of nozzles, have a volume in several picoliters, while each nozzle jets the droplets into cavities with micron-meter size located on substrates. Due to measurement difficulties at micro-scale, the numerical simulation could serve as an efficient and preliminary way to evaluate the micro-sized droplet impinging behavior into a cavity. The micro-fluidic flow is computed by solving the three-dimensional Navier-Stokes equations through a finite volume discretization. The droplet front is predicted by a volume-of-fluid approach, in which the surface tension is modeled as a function of the fluid concentration. This paper discusses the influence of fluid properties, such as surface tension and fluid viscosity, on micro-fluidic characteristics at different jetting speeds in the deposition process via the proposed numerical approach.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.193-194
• /
• 2007

In this paper we present work done by Kodak Graphic-Communications-Group and our partners demonstrating applications where laser direct imaging could replace photolithography in display manufacturing. Such applications range from direct manufacturing (e.g. LCD color-filters) to producing “masters” where manufacturing is done by traditional printing methods (e.g. flexography, Gravure-printing).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.852-854
• /
• 2015

In this letter, we designed and fabricated the paper-based ring-type frequency selective surface(FSSs) using inkjet printing method for practicable building wall applications to enhancement of the indoor communication environment, including low cost and ease of fabrication. Designed FSS has the band-stop characteristics at X-band, stable angle of incidence and wide bandwidth. Comparisons between measured and simulated results showed the good agreements.

• Journal of the Korean Chemical Society
• /
• v.65 no.4
• /
• pp.260-267
• /
• 2021

Increasing the needs for eco-friendly natural materials, much attention on natural dyes has been attracted. Curcumin, one of abundant natural dyes available in nature, is an eco-friendly molecule found in turmeric. In this study, the colorimetric sensing behavior characteristics of ammonia and hydrogen chloride gases was analyzed using curcumin ink-printed paper and cotton fabric by inkjet printing method. The fabricated paper and fabric were utilized as a colorimetric sensor that can track food spoilage. The color changes of the samples printed on the paper and cotton upon exposure to the toxic gases, the reversibility of the color changes, and the water resistance were investigated. Both samples showed reversible reactions with NH3 and HCl, and small amount of ammonia produced by food spoilage was successfully sensed with naked eyes, confirming its capability to warn food spoilage in our daily life.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1087-1090
• /
• 2008

This paper presents the electro-luminescence (EL) display lamp which is patterned on a curved surface by the pad printing method. The printing methods, including the gravure, screen, flexo, inkjet, and pad printing, have an advantage of one-step direct patterning. However, in general, the printing and semi-conductor process, except pad printing method, cannot be applied for patterning on a curved surface. Thus, in this paper, we used pad printing method for patterning an EL display lamp on a curved surface. The EL display lamp consists of 5 layers: Bottom electrode; Dielectric layer; Phosphor; Transparent electrode; Bus electrode. Finally, we printed EL display lamp on a dish, which has a radius of curvature 80mm. The EL display lamp was driven at AC 200V of 1kHz.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.352-358
• /
• 2019

In recent years, printing paper with a function of information delivery and aesthetic value has attracted a great attention with increasing market demand for coated paper that is capable of high quality printing. The coated paper for inkjet printing with high-quality of photorealistic grades requires the coating layer with a good wettability and porous surface structure in order to improve the printability of ink. In this study, the coated paper was prepared using polyvinyl alcohol (PVA) and surface treated nano silica sol with silane coupling agent. It was confirmed that the coating layer with surface treated nano silica sol showed a uniform pore distribution and flat surface roughness. Glossiness of the prepared printing paper was similar to that of commercial high quality photo paper. Especially, the coated paper with surface treated nano silica sol showed improved printability with excellent roundness of the printed dot of ink. These results indicates that the coating layer with excellent wettability and uniform pore distribution can be formed by using the nano-silica particles with improved dispersibility through the surface treatment of the silane coupling agent.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.26-29
• /
• 2008

In the fields of electronics and displays where inkjet printing has demonstrated its capability to fabricate colorant subpixels of thin film transistor liquid crystal(TFT LCD) color filters and organic light emitting diode (OLED) displays, conducting tracks and TFTs, the production of satellite droplets is one of primary things to eliminate because they generally deteriorate the pattern quality. To understand the production mechanism of satellite droplets in this paper, driving waveforms such as monopolar and bipolar were employed and the influence of the pulse duration time were investigated in both experimental and numerical aspects.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2032-2038
• /
• 2007

Embedded Controller which controls whole system is most important part of embedded system. Nowadays, new technique called SoC is more using than ASIC. But SoC have some problems. Because of long development time and high cost, it is hard to applying SoC to small and medium enterprise. So many companies use IP technique combined with embedded processor. High resolution inkjet marking system is printing system with embedded controller. It is used in various part of industry. But it has many problems such as printing quality, marking errors, system faults and so on. In this paper, we designed and implemented IP that can solve the printing quality problems. We analyzed total-logic-elements and timing by simulation. As a result of simulation, we could verified that output signals satisfied reference timing. Appling IP to high resolution inkjet marking system, we could get good quality printing message.