• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.7
• /
• pp.552-557
• /
• 2012

In this study, we have coated the inner surface of YSZ channel using LSM powder ink through depressurization process for making the cathode of a stacked planar-type SOFC module. To coat the surface of YSZ channel uniformly, we tried to find the optimum manufacturing condition for LSM ink. We used four different dispersants (BYK series) and two different solvents (ethanol and DMF) to make the LSM ink. It was revealed that the ink made with the ethanol solvent and the BYK-111 dispersant has the lowest viscosity, relatively low contact angle and most excellent dispersibility. After depressurizing a chamber filled with LSM ink and sintered YSZ channel, we have found that the YSZ channel was uniformly coated with LSM cathode. The LSM ink with 25 vol% BYK-111 showed the most uniform coating.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.593-597
• /
• 2015

Ni ink for electrohydrodynamic (EHD) continuous jet printing has been developed by using Ni nanoparticles mixed with conhesiveness provider. EHD continuous jet printing was used in order to realize $20{\mu}m$ pattern width. Ink stability was investigated by using Turbi-scan which monitors agglomeration and precipitation of nanoparticles in the ink for three days. The Turbi-scan results showed that the formulated Ni ink had been stable for 3 days without any indication of precipitation across the entire ink. Antireflection coating (ARC) layer in crystalline solar cell wafers was removed by laser ablation technique leading to the formation of 84 grooves where the Ni ink was printed by EHD continuous jet printing. The printability and microstructure of EHD-jet-printed Ni lines were investigated by using optical and electron microscopes. 84 Ni lines with the width less than $20{\mu}m$ were successfully printed by one-time printing without any misalignment and fill the laser-ablated ARC grooves.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.98-104
• /
• 2010

Rapid Prototypes with internally colored objects are convenient by visualizing. A rapid prototyping method has been developed to fabricate mono-colored or multi-colored objects. In this work, a new process was proposed that can fabricate internally visible colored 3D objects in stereolithography parts. The process consists of projection stereolithography process using transparent photocurable resin for outer shapes and molten ink deposition process using molten solid ink for internal shapes. In molten ink deposition process, molten solid ink could be deposited uniformly in a designed pattern. To make molten solid ink uniform over a designed region, parametric study through a patterning solid ink was performed. By laminating resin and solid ink in sequence, the process can make colored 3D objects in StereoLithography(SL) parts. The practicality and effectiveness of the proposed process were verified through fabrication of colored basic 3D objects in SL parts.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.82-87
• /
• 2023

<Deep Sea> is an 3D animated film that stands out for its exceptional special effects and distinctive artistic style. The film employs a multitude of dazzling and vibrant ink particles, creating a strong sense of three-dimensionality and weightlessness, while simultaneously portraying a dreamlike and elegant representation of a deep sea ink painting. Furthermore, through the utilization of fragmented stream of consciousness narrative technique, the film establishes a unique artistic effect infused with a Chinese atmosphere. This paper by analyzing the unique particle ink art style and color and stream of consciousness narrative methods in film, this paper discusses the innovative art style generated by traditional ink art style combined with three-dimensional technology, and the integration of traditional ink art ideas and artistic conception in animated films. The objective is to cultivate a new ink art style and prove the importance of traditional cultural expression in animated films, while providing new perspectives for the future application of traditional art in animation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.47-52
• /
• 2006

This study is about the effect from properties of coated paper and ink dispersion to the printed mottle. Ink receptivity would be expected that it is mainly effected by roughness of coated paper Because the transfer of ink can not be uniform with rough surface, it will cause the optical appearance such like printed mottle. And also it may be able to cause the printed mottle from uneven transfer of ink due to absorption property of based paper, depend on size degree, by using dampening in Off-set printing. Each different specific of surface and ink dispersion could cause printed mottle. Therefore this study was carried out by using densitometer and image analysis to show the interaction between properties of domestic coated paper and ink dispersion.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10803-10808
• /
• 2015

Background: The role of $p16^{INK4A}$ expression in uterine cervix cancer is well established. In the remaining female lower genital tract cancers, the importance of $p16^{INK4A}$ up-regulation is less clear. In our study, we analyzed the role of $p16^{INK4A}$ expression and HPV infection in carcinomas of the vulva and the vagina in Tunisian women. Materials and Methods: We conducted a retrospective study of 30 carcinomas including 15 vulvar squamous cell carcinomas (SCCs) and 15 vaginal SCCs. Immunohistochemistry was used to determine $p16^{INK4A}$ expression. HPV detection and typing was by in situ hybridization. Results: $p16^{INK4A}$ expression was detected in 86.7% of vaginal SCCs with a strong and diffuse immunostaining in 60% of cases, and also in 73.3% of vulvar SCCs with focal immunoreactivity in 53.3% The association between $p16^{INK4A}$ expression and HPV infection was significant in vaginal SCCs (p=0.001) but not vulvar SCCs (p>0.05). Conclusions: $p16^{INK4A}$ expression could be used as a useful marker for HPV positivity in vaginal SCCs similar to that described in uterine cervix cancers. However, our data support the presence of 2 different mechanisms for $p16^{INK4A}$ expression in HPV-related and HPV-unrelated vulvar carcinomas.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.29-36
• /
• 2001

This paper was made to evaluate the effect of the blending ration of GCC and No. 1 clay on the printability by investigating the structure of pore such as the pore rate, the number of pores, pore size and distribution of coated paper. The coated structure is mainly depended on the results of correlation between pigment and binder. It means that the structure of the pore occurred is chiefly affected by the blending ratio of GCC and No. 1 clay. This physical properties of the pore have a close relation with ink set-off associated with the drying rate and the penetration in ink into base paper and with printing gloss. Therefore it was needed to find out how the pore structure and the printability will be changed by modifying the blending ratio of GCC and No. 1 clay to vary the pore structure of coated paper. Below are the results of measurement: As the blending ratio of clay going up, water retention, sedimentation volume. smoothness, and paper gloss were increased, but relatively brightness and opacity were decreased. Pore rate was the highest at the blending ratio of No. 1 clay to GCC, 70:30. In this case, average pore radius was also increased. Ink receptivity and K&N ink receptivity were improved with the increase of the blending ratio of GCC, where was, ink setting was vice versa. No difference was observed in the weight of ink, but ink repellance decrease with the decrease of blending ratio of GCC.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.5
• /
• pp.174-182
• /
• 2020

The printed electronics field using ink-jet printing technology is in the spotlight as a next-generation technology, especially ink-jet 3D printing, which can simultaneously discharge and precisely control various ink materials, has been actively researched in recent years. In this study, complex structure of an insulating layer and a conductive layer was fabricated with photo-curable silica ink and PVP-added Cu nano ink using ink-jet 3D printing technology. A precise photocured silica insulating layer was designed by optimizing the printing conditions and the rheological properties of the ink, and the resistance of the insulating layer was 2.43 × 10¹³ Ω·cm. On the photo-cured silica insulating layer, a Cu conductive layer was printed by controlling droplet distance. The sintering of the PVP-added nano Cu ink was performed using an IPL flash sintering process, and electrical and mechanical properties were confirmed according to the annealing temperature and applied voltage. Finally, it was confirmed that the resistance of the PVP-added Cu conductive layer was very low as 29 μΩ·cm under 100℃ annealing temperature and 700 V of IPL applied voltage, and the adhesion to the photo-cured silica insulating layer was very good.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1997.11a
• /
• pp.354-367
• /
• 1997

Chaum's blind signature scheme is the typical withdrawal procedure of electronic cash. In blind signature scheme, a signer sign a document while he never knows the content of the signed document. Yung and Jakobsson presented new signature scheme with which the content of document can be unblinded if unusual activity is detected. This signature is referred to as the magic ink signature. In this paper, we analyze the magic ink signature, and present two new magic ink signature schemes using KCDSA and Schnorr signature algorithm. We propose two types of the efficient electonic cash system using these magic ink signature schemes. One is the electronic cash system with a single server magic init signature scheme, and the other is the electronic cash system with a distributed magic ink signature scheme.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.12 no.1
• /
• pp.13-27
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printablility of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular weight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.