• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.1
• /
• pp.1-10
• /
• 2003

Printing ink is faced various shear stress situation until it transfer to the printed substrate through the press. And in each shear stress condition the ink is needed to keep the appropriate viscosity according to the condition. The change of printing ink viscosity has been explained by well-known through the viscosity profile curve. But actually, the quality of printed paper depends on the ink behavior after transfer the substrates. Like this, to look into the behaviour of the ink on the printed substrate, it is needed the experiment of the ink structure recovering by rheology study. In this study, by controling the $CaCO_3$ content in the ink, after investigating the effect of the ink's structure recovery of the pigment concentration, we intend to predict the printing quality of the ink behvior on the substrate depending on pigment content.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04a
• /
• pp.7-16
• /
• 1999

The aim of this research was to evaluate the influences of coating components and structures on ink absorbency. The ink absorbency was measured as porosity, K&N ink absorption, gloss and ink set-off. In order to obtain the relationship between the coating structure and the ink absorbency, the binder level was adjusted and two types of pigments were examined. One of the pigments was known to make the porous coating structure and the other one had strong ink affinity. The effects of coating components were studied by applying six different types of latex and various additives . In this research, CLC(cylindrical laboratory coater) and Prufbau printability tester were used. It was found that the decreasing latex dosage and introducing porous pigment were effective solutions to increase ink absorbency. However, the ink absorbency could not be improved by applying the fine pigment even though it had strong ink affinity. Among the characters of the latex, particle size and surface tension were found to have the strong effect on ink absorbency. The ink absorbency increased with large particle size and low surface tension latex. The additives were varied and it was found that applying to the top coating was effective.

• Applied Microscopy
• /
• v.52
• /
• pp.3.1-3.8
• /
• 2022

Our purpose in this study is to analyze the microstructural characteristics and constituent elements of inorganic substances added to the yellow ink and red ink pigments used in permanent makeup. We observed the microstructural properties of inorganic pigments added to the ink using a scanning electron microscopy (SEM) and analyzed the constituent elements of the inorganic pigment particles using an energy dispersive X-ray spectroscopy (EDX). In red wine-colored ink, cubic titanium dioxide with a diameter of 110 to 200 nm was the major component, and rod-shaped iron oxide was rarely observed. Most of the ingredients of taupe yellow ink were rod-shaped yellow iron oxide, and a small amount of cubic titanium dioxide was observed. Red wine-colored ink and taupe yellow ink contained lumps composed of titanium dioxide particles. In red wine-colored ink, lumps were formed by agglomeration. However, we observed that the surface of the lump composed of titanium dioxide in the taupe yellow ink had a smooth surface caused by external physical compression. The titanium dioxide particle mass which found in taupe yellow ink in this study is an artificial product. When this mass accumulates in the dermis, it may cause a color mismatch. Therefore, permanent makeup using fine pigments should be free of foreign substances that may cause trouble in the skin. In addition, there is a need to improve the quality of the ink so that the required color can be safe and long lasting in the dermis.

• Science of Emotion and Sensibility
• /
• v.18 no.4
• /
• pp.119-128
• /
• 2015

The demand of reflective display devices are increasing by widespread of electronic books. In this study, the emotional and reading state for reading material of paper books, reflective display, and LCD display were compared to each other. In order to determine the consumers' sensibility of E-ink e-book the emotional assessment of three different types of books was evaluated following with readability assessment and preference experiment. These experiments controlled contents on the screen by using masks to hide hardware aspects of contents. The results of the sensibility reactions by emotional-vocabulary-experiment using semantic scale show that E-ink is closer to paper than LCD. The readability and preference questionnaire for the experimental results show that e-ink is preferred than LCD and paper was preferred or seem similar to E-ink. The conclusions shows that E-ink and paper has similar sensibility and E-ink e-book is expected to replace paper books.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.69-85
• /
• 2010

Currently, environmental contaminants that can cause Aromatic types of hydrocarbons, less than 1% made of Aromatic Free kind of used products, soybean oil products with linseed oil with the products, rice products using a wide range of environmentally ecological ink since 2000 is released quickly. All materials used in printed material, if the green is the best way to print the composite materials in industrial applications, because each process on the print quality and productivity, there can be many differences in this experiment because it accounts for a large proportion in the print general ink in the ink section and the International color standards(ISO2846-1:2006) certified ecological ink were compared. Therefore, in this paper has the ink released from the same company, each common general ink and ecological ink in the same condition which results were focused on whether the emerging international color standard(ISO 2846-1:2006) recognized for environmentally ecological ink printed color reproduction of the actual offset(color reproduction) how conformity to ISO 12647-2 standard color on the basis of the offset would check Color Reproduction. Based on the results of the experiments of this study, given the ecological ink coated paper, uncoated paper both color difference and the gamut of the ISO 12647-2 standard is suitable for ecological ink, the ink's color gamut reproduction, even more than existing international standards, there is no confirmed that the correct color reproduction possible. Using environmentally ecological ink industries is expected to respond to environmental policy.

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.321-326
• /
• 2003

In order for disperse dye based ink to be fitted with the critical requirements of ink jet printing, this study was undertaken to investigate the effects of 6 different dispersants on the milling efficiency of insoluble dye particles and dispersion stability of the final ink. It was found that a polystyrene dispersant with high molecular weight exerted relatively better dispersion stability which may be associated with its steric stabilization effect in the ink solution.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.203-208
• /
• 2007

Drying characteristics are confirmed by experiment to a printing machine which use Gravure ink or metal ink for an optimum design of direct radiation drying system room using NIR. As a result, Drying is easily accomplished in short distance and low moving speed in Gravure ink, but drying is dropped in metal ink because of oil. This confirmed that the development of water metal ink had to be proceeded to accomplish a perfect drying condition.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.75-80
• /
• 2016

Ink-jet printing has become a widespread technology with the society's increase in aesthetic awareness. Especially, ink-jet printing using glazed ceramic ink can offer huge advantages including high quality decoration, continuous processing, glaze patterning, and direct reproduction of high resolution images. Recently, ceramic ink-jet printing has been rapidly introduced to decorate the porcelain product and the ceramic tiles. In this study, we provide an effective method to apply ceramic ink-jet decorations on the glass substrates using a oleophobic coating with perfluorooctyl trichlorosilane. The ink-jet printed patterns were much clearer on the oleophobically coated glass surface than the bare glass surface. The contact angle of the ceramic ink was maximized to the value of $64.0^{\circ}$ on the glass surface, when it was treated with 1 vol% PFTS solution for 1 min. The effects of the printing conditions and firing process on the ink-jet printed patterns on the oleophobically coated glass were also investigated.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.46-56
• /
• 2014

The aim of this reviews is to introduce the information concerning design of the UV-curable jet ink composition in order to provide a good adhesive property on non-porous surface. In order to clarify the viscosity dependence of flying speed for the UV curable jet ink, rheological analysis and observation of the flying state of the ink were carried out. The relationship between ink formulas and adhesive property on non-porous surface was investigated. It was examined the adhesive property of radical polymerization type UV curable jet ink included hydrogen abstraction type photo-initiator, it was expected that the strong adhesive strength can be obtained between the ink and non-porous surface in this study. UV curable jet ink with a slight amount of water was prepared. Optimum ratio of the cationic polymerization type UV curable jet ink shows an adequate adhesive strength towards two kinds of non-porous surface such as glass, poly(vinyl chloride) when tests were conducted on the ink jet-printing test machine.

• Korean Journal of Materials Research
• /
• v.27 no.11
• /
• pp.583-589
• /
• 2017

Ceramic ink-jet printing has become a widespread technology in ceramic tile and ceramicware industries, due to its capability of manufacturing products on demand with various designs. Generally, thermally stable ceramic inks of digital primary colors(cyan, magenta, yellow, black) are required for ink-jet printing of full color image on ceramic tile. Here, we synthesized an aqueous glass-ceramic ink, which is free of Volatile organic compound(VOC) evolution, and investigated its inkjet printability. $CoAl_2O_4$ inorganic pigment and glass frit were dispersed in aqueous solution, and rheological behavior was optimized. The formulated glass-ceramic ink was suitably jetted as single sphere-shaped droplets without satellite drops. After ink-jet printing and firing processes, the printed glass-ceramic ink pattern on glazed ceramic tile was stably maintained without ink spreading phenomena and showed an improved scratch resistance.