• Journal of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.398-403
• /
• 1980

Carboxyl-terminated polybutadiene was prepared by free-radical polymerization using 4,4'-azobis-[4-cyano valeric acid] as an initiator and the effect of initiator concentration on polymer properties was investigated. Polymerization of the carboxyl-terminated polybutadiene was carried out varying the initiator concentration reacting with a constant butadiene concentration. The carboxyl weight percent decreased with increasing initiator concentration. The conversion was proportional to the square root of initiator concentration, giving a functionality greater than 2.0 which is consistent with the general tendency of free radical polymerization.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.1-5
• /
• 2018

In this study, we designed and synthesized novel thermal radical initiators of BTAP (1-phenyl-3,3-dipropyltriazene), BTACP (1-(phenyldiazenyl)pyrrolidine), BTACH (1-(phenyldiazenyl)piperidine), and BTACH7 (1-(phenyldiazenyl)azepane) based on a triazene moiety to provide a thermal initiator for radical polymerization. The synthetic method is valuable due to the simplicity. In addition, the synthesized thermal initiator did not affect the color of the polymer. Among the four initiators, the polymerization time for the BTACH of the 6-membered ring decreased by 67%, as opposed to the polymerization time without initiator. Conversion after polymerization was over 92%. DSC experiments also showed that the initiator with hexagonal rings had the lowest peak polymerization temperature of $160^{\circ}C$. Our study suggests a promising new initiator system that is effective for radical polymerization.

• Macromolecular Research
• /
• v.12 no.2
• /
• pp.213-218
• /
• 2004

We have performed dispersion polymerization of acrylamide in tert-butyl alcohol/water mixture-using hydroxypropyl cellulose and ammonium persulfate as the stabilizer and the initiator, respectively - to study the effects that the concentration of monomer, initiator, and stabilizer, the tert-butyl alcohol/water ratios as polymerization media, and the reaction temperature have on, among other things, the polymerization kinetics, particle sizes, and molecular weights. The polymerization rate increased upon increasing the concentration of the monomer, initiator, and stabilizer, the water content in the tert-butyl alcohol/water media, and the polymerization temperature. The average particle size of the lattices increased upon increasing the concentration of initiator, the polymerization temperature, and the water content in the tert-butyl alcohol/water media, but it decreased upon increasing the concentration of monomer and stabilizer. The viscosity-average molecular weight increased upon increasing the concentration of monomer and stabilizer and the water content in the tert-butyl alcohol/water media, but it decreased upon increasing both the concentration of initiator and the polymerization temperature.

• Macromolecular Research
• /
• v.15 no.4
• /
• pp.324-329
• /
• 2007

An octa-functional alkoxyamine initiator, with the 2,2,6,6-tetramethyl-l-piperidinyloxy (TEMPO) free radical, was synthesized based on resorcinarene, with its efficiency to initiate the nitroxide-mediated free radical copolymerization of styrene and methyl methacrylate (MMA) described. A difunctional analogue of this initiator was also synthesized, using resorcinol as the core molecule. The structures of the resulting initiators were confirmed by homolysis studies based on electron spin resonance spectroscopy and molecular modeling. The polymerization behavior and characteristics of the polymers obtained using these two initiators were also compared. Well-defined star-shaped and linear random copolymers, with low polydispersities and controlled molecular weights, were prepared. The efficiencies of these initiators towards copolymerization, as well as the parameters permitting the formation of well-defined polymers, were also investigated. The reactivity ratios were $r_a=0.42(a=styrene)\;and\;r_b=0.33(b=MMA)$ for the octa-functional initiator system and $r_a=0.45\;and\;r_b=0.39$ for the difunctional initiator system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.2
• /
• pp.43-51
• /
• 2020

After the accelerated aging, the bulkhead initiator using high explosives was carried out to verify aging characteristics. The Thru-Bulkhead Initiator operates by transmitting shock-wave generated from micro-initiator to the acceptor and the ignition explosives through the bulkhead. In order to evaluate the life-time of the product, the accelerated aging condition was set according to the life-time, and the ignition performance of the sample was measured every 10 cycles by measuring the delay time and the maximum pressure through the 10cc closed bomb test. In addition, variance analysis was used to determine aging.

• Elastomers and Composites
• /
• v.14 no.1
• /
• pp.7-12
• /
• 1979

Graft copolymerization of methlymethacrylate(MMA) onto sodium alginate(SA) aqueous solution by sodium metaperiodate$(NaIO_4)$ as an initiator was carried out with the variation of the reaction time, the reaction temperature and the concentrations of initiator and monomer. The results obtained were as follows: 1. SA was easily separated from the reaction mixture of homopolymer, graft polymer and sodium alginate ungrafted by the treatment of concentrated boiling $Na_3PO_4$, solution with the small amount of $Na_2SO_3$ to the mixture and then isolated as the acid form by acidifying the salts solution containing SA. 2. The amount of graft polymer was larger than that of homopolymer below $70^{\circ}C$ whereas above $70^{\circ}C$ the amount of homopolymer was larger. 3. The sum of each amount of graft polymer ana homopolymer was always increased with increase of the reaction time, the reaction temperature and the concentrations of initiator and monomer. 4. With increase of the concentration of initiator, the graft efficiency was increased below $70^{\circ}C$ while decreased above $70^{\circ}C$. 5. Graft copolymerization of MMA onto SA in aqueous solution was carried out without initiator.

• Composites Research
• /
• v.34 no.3
• /
• pp.180-185
• /
• 2021

Due to the formation of random three dimensional network structure, which cause a lot of scattering of phonons, the thermal conductivity is low when the liquid crystalline epoxy is cured with amine-based curing agent. This problem is solved by using a cationic initiator that can make mesogen groups to be stacked structure. In this experiment, the thermal stability is compared by investigating the activation energy of isothermal decomposition through TGA of an epoxy using an amine-based curing agent and a cationic initiator. As a result, the energy of the activation of the epoxy using a cationic initiator is high. Compared with the previous experiments, the thermal stability is similar to the thermal conductivity.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.337-337
• /
• 2006

The synthesis of an octafunctional resorcinarene based initiator for nitroxide mediated polymerization and its ability to yield random star copolymers of styrene and methyl methacrylate is studied. The effect of the initiator conformations towards its activity and the conditions that permit the formation of well-defined star block copolymers is also investigated in detail. The characterization of the initiator and the polymers were carried out by various spectro-analytical techniques. Well-defined random copolymers were obtained with controlled molecular weight and low PDI depending on the monomer feed.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2281-2284
• /
• 2014

Polystyrene beads (PS beads) with narrow size distribution were synthesized, and their diameter was controlled from 1.2 to $5{\mu}m$ by varying the injection rate of a styrene solution containing initiator and the concentration of reactant, such as initiator and capping material. The diameter of the PS beads increased with increasing in the injection rates and the initiator concentration or decreasing the capping material concentration. Then, we used the PS beads as building block, and organized them into a hexagonally close-packed monolayer on substrate with template-assisted manual assembly. We showed perfect hexagonally close-packed organization of the PS beads with various sizes in large-scale area. And we demonstrated the superiority of the dry manual assembly over the wet self-assembly in terms of simplicity, speed, perfect ordering, and large scale.

• Macromolecular Research
• /
• v.10 no.3
• /
• pp.140-144
• /
• 2002

Dispersion polymerization of acrylamide was carried out in the media of methyl alcohol/$H_2O$ mixtures using hydroxypropyl cellulose and ammonium persulfate as steric stabilizer and initiator, respectively. The effects of concentrations of initiator and steric stabilizer, amount of monomer, polymerization temperature, methyl alcohol/$H_2O$ ratio, and purification of monomer and nitrogen purge on the particle size of the latices and molecular weight of the polymers were investigated. The average particle diameter increased with increasing concentration of initiator, water content in methyl alcohol/$H_2O$ media, and polymerization temperature, but decreased with monomer and stabilizer concentrations. The viscosity average molecular weight increased with increasing concentrations of monomer, steric stabilizer, and water content in dispersion media, but decreased with initiator concentration and polymerization temperature. The PAM polymers prepared with the purified monomer and the nitrogen purging before the reaction showed the highest molecular weight.